- Видео 126
- Просмотров 209 470
ginzu emulation
Франция
Добавлен 8 авг 2016
Hello everyone!
For those who are discovering this channel, here is a little pitch about it:
I am a french fan of retrogaming, arcade was part of my childhood. I knews big arcades rooms with it’s uniq atmosfear, very noisy and dark only lit by the light of the screens and neons of the machines.
In 2013, i decided to make my own arcade machine ( vewlix style) i had no experience in carpentry nor in car paint but i did it! 😋
Peace to all,
Ginzu
For those who are discovering this channel, here is a little pitch about it:
I am a french fan of retrogaming, arcade was part of my childhood. I knews big arcades rooms with it’s uniq atmosfear, very noisy and dark only lit by the light of the screens and neons of the machines.
In 2013, i decided to make my own arcade machine ( vewlix style) i had no experience in carpentry nor in car paint but i did it! 😋
Peace to all,
Ginzu
Видео
PCSX2 1.7 Nightly - Lightgun guide (gun4ir) [+ english subs] - Video Updated!
Просмотров 6 тыс.Год назад
PCSX2 1.7 Nightly - Lightgun guide (gun4ir) [ english subs] - Video Updated!
cobra The Arcade quick Test [Play! emulator] with gun4ir
Просмотров 1,8 тыс.Год назад
cobra The Arcade quick Test [Play! emulator] with gun4ir
Raw Thrills Terminator Salvation / Aliens Armageddons lightgun - Gun4ir Build [Gun4Ir build 3]
Просмотров 3,3 тыс.Год назад
Raw Thrills Terminator Salvation / Aliens Armageddons lightgun - Gun4ir Build [Gun4Ir build 3]
Virtua Cop 3 mayflash dolphin bar 2 players
Просмотров 3 тыс.2 года назад
Virtua Cop 3 mayflash dolphin bar 2 players
House of the dead Scarlet Dawn - Wiimotes - 2 Players
Просмотров 4,4 тыс.2 года назад
House of the dead Scarlet Dawn - Wiimotes - 2 Players
Lichtknarre usb WII Sensor bar Compatibility
Просмотров 4,8 тыс.2 года назад
Lichtknarre usb WII Sensor bar Compatibility
Desert Eagle Dreamcast Gun4IR #test2 pcbV4
Просмотров 1,1 тыс.3 года назад
Desert Eagle Dreamcast Gun4IR #test2 pcbV4
SINDEN LIGHTGUN TEST 6 [Time crisis 2 PCSX2]
Просмотров 1 тыс.3 года назад
SINDEN LIGHTGUN TEST 6 [Time crisis 2 PCSX2]
SINDEN LIGHTGUN TEST 5 [Lethal Enforcer Mame emulator]
Просмотров 4063 года назад
SINDEN LIGHTGUN TEST 5 [Lethal Enforcer Mame emulator]
SINDEN LIGHTGUN TEST3 [Sport Shooting Usa - Demul - Atomiswave]
Просмотров 3893 года назад
SINDEN LIGHTGUN TEST3 [Sport Shooting Usa - Demul - Atomiswave]
SINDEN LIGHTGUN TEST4 [ Hotd2 Demul - Naomi ]
Просмотров 8403 года назад
SINDEN LIGHTGUN TEST4 [ Hotd2 Demul - Naomi ]
BlazingAngels old joystick Thrustmaster test (teknoparrot)
Просмотров 6343 года назад
BlazingAngels old joystick Thrustmaster test (teknoparrot)
Virtua Cop 2 - Lichtknarre beta software
Просмотров 7793 года назад
Virtua Cop 2 - Lichtknarre beta software
Lichtknarre : the accuracy for your wiimotes!
Просмотров 2,5 тыс.3 года назад
Lichtknarre : the accuracy for your wiimotes!
Ghost Squad : Lichtknarre beta software (Dolphin emulator)
Просмотров 6763 года назад
Ghost Squad : Lichtknarre beta software (Dolphin emulator)
Terminator2 Lichtknarre beta software
Просмотров 2543 года назад
Terminator2 Lichtknarre beta software
Time Crisis Lichtknarre beta software
Просмотров 4843 года назад
Time Crisis Lichtknarre beta software
hola, donde se compra la PCB? gracias
Hola, por el momento en ninguna parte. Por otro lado, si hay gente que esté interesada, puedo asegurarme de vender determinadas unidades. Sin embargo, solicitaría la aprobación de Jaybee con respecto al uso de la pieza gun4ir utilizada en mi PCB.
@@ginzuemulation9265 Gracias
@@ginzuemulation9265 gracias
how to get the gmes?
J'ai fait la même chose sur ma borne , c'est très cool le flipper sur borne , seulement je n'est pas le petit écran sur tu as , sa rend bien félicitations ;)
@@MrBurnsGamingChannelFR oui, c'est vraiment cool. En revanche, y a quand même du taf pour le configurer et bien le positionner.
@@ginzuemulation9265 perso j'ai attribuer les touche a joytokey, une touche sur la manette 1 et l'autre bouton sur la manette 2 , et lancer la boule sur start de la manette 2 je suis sur launchbox , donc à configurer pour lancer joy et le couper c'est pas difficile
@@MrBurnsGamingChannelFR en effet, il y a plusieurs manière de faire. Moi j'ai dédié les flippers et le lance bille à la kl25z et le reste est géré par un arduino.
@@ginzuemulation9265 d'accord le voie :)
Hi, is there any way to play light gun games on Sega Model 2 with Xbox controller? Now that Lichtknarre has an VGIEm plugin that can fake Wiimote as Xbox controllers, so my plan is to play with 2 Wiimotes + nunchuk for better aiming (Trigger button for shooting and Z on nunchuk for reload). But I was unable to make Sega Model 2 to work. For some reason, Sega Model set mouse as a controller for player 1 by default and no way to change it. I was wondering how you make it work?
@@harrisonneville2629 hi. Sega model 2 need demulshooter for 2 players. Maybe you can try that.
Hey, thanks for the great video - this still seems to be the only way to do a 2-player setup on PCSX2. I tried on the latest version, but the USB input would not pickup the Mayflash devices. I have a problem though: the game only seems to pick up input from the nuvee plugin and the Mayflash only has two buttons which coincide with it, left-click and right-click. This is a problem with Time Crisis 3 for example, as I can only map two buttons and I need to be able to fire, reload and change weapons. In the Lilypad plugin I tried Windows Messaging, Direct Input and Raw Input to assign buttons, but the game wouldn't pick up any button mappings other than those set in the nuvee plugin. Ideally I'd like to map reload to another device, like a USB pedal. Should this be working, or do all the controls need to be mapped to Wiimote?
Update: I didn't realise that weapon switching is done by pulling the trigger whilst in cover, so I was able to solve this by mapping "Reload" to mouse wheel up/down. I also encountered a problem with the cursor becoming badly misaligned in split screen, which I solved by changing the TC profile in the nuvee plugin settings: ; 480i, 480p ; - (mouse only) use calibration hack time_crisis3 "Time Crisis 3 (U)" 90.25 97.5 390 154 namco 640 125 This makes it so that you cannot select 2-player in the menu because the calibration is off when not in split-screen, so I created a save state before editing the profile. Still not got the pedal solved, but at least the game is completely playable this way.
There is no way I can even get just one wiimote to run, it only takes the trigger but the crosshair doesn't move :(
@@diegozunigaurmeneta9081 hi, are the leds on? And if yes, be sure your supermodel.ini is well configured with the good axis from each wiimotes i know it is not the simple emulator to configure.
Truc tout bête, la barre wii officielle tu la branches à quoi? C'est pas génial de devoir rallumer la wii juste pour alimenter la barre
@@mryaggi salut. En fait, il faut que tu t'achète une barre wii avec l'usb. Tu dois pouvoir la trouver sur amazon ou ali express. Elles sont pas cher. Ne prends pas la Mayflash dolphin bar, ça ne fonctionne pas avec Lichtknarre.
@@ginzuemulation9265 merci. Dommage, qu'avoir une wii legit n'avantage en rien. Apres faudra que je veille au recul, avec les tv de maintenant on dirait que j'arrive pas à être assez loin (jai une inversion axe x)
Stunning work man! Huge fan of your builds.
where did you get the dome button?
If i remember well i bought them on Ali.
Nice!!!!
Eu tenho uma aimtrak e uma dolphin bar com alguns wiimotes! Estou a semanas tentando deixar a aimtrak como player 1, e um wiimote via dophin bar como player 2, mas não da certo! Fica as duas pistolas com a mira do player um!
@@BatistutaMatador09 you should use demulshooter to be able to play this emulator with 2 players.
Looks solid!
In let’s go jungle , I use the shader fix for lgj but after that it runs black screen . Can you tell me how to fix it
My let’s go jungle are black screen and idk which game file should I choose (lgj_final) ?
@@Crazew-fl3qs i am on vacation but yes it is if i remember well 👍
Someone should try this with third party wiimote
Hi this is great. I’m trying to do the same thing with leds in my my marquee, but I can’t figure it out. I can’t seem to get the Arduino to read the outputs. Could you give me some advice please? Cheers
@@geansv I will share my encoder code as soon as my project is finished
@@ginzuemulation9265 That would be amazing. Thanks!
recently i bought this light gun arcade cabinet, this game is on it too and it's good fun. can i ask you what keyboard code you need to map/code to get the elevator go up/down and open/closed. i can't seem to find the right key to make the choice to go up/down in the game, so mostly it just decides to go somewhere until a point that i HAVE to press a button and don't know which one.
@@jerseyspender hi, i am not sure i understand what you want. Could you give me more context? It is fir an arduino project or it is something else?
@@ginzuemulation9265 it's about the button on the lightgun. It needs a keyboard input mapped to the button, to get the elevator to go down. The most logical would be [down arrow]. It's okay, I will check with the guy i bought it from.
I can't even configure it. it freezes at startup on Wii LED 2
@@nytrox84 maybe try to find help on theire discord.
Thankyouthankyouthankyouthankyouthankyou (merci). I got a Sinden lightgun and was very disappointed with the default mist that looms whenever you hold down the trigger. You saved my life.
Salut merci pour la vidéo, lorsque j'essaye de configurer les touches dans l'interface manette en utilisant les touches de mon Gcon 2, il ne se passe rien. Dois je en déduire que mon Gcon ne fonctionne pas? Il est pourtant reconnu par mon PC mais en tant que périphérique inconnu.
@@WorldOfSyno bonne question. Peripherique inconnu, c'est pas bon signe. Il faut peut etre installer des drivers.
@@ginzuemulation9265 c'est ce que je m'étais dit, j'ai donc creusé la piste et j'ai appris que les drivers du gcon n'existe plus sous w10 mais comme je vois des vidéos comme la tienne ou vous arrivez à le faire fonctionner, je comprends pas
@@WorldOfSyno ah ok. En fait, de nos jours on peut utiliser des nouveaux système de lightgun compatibles avec les ecran lcd. Il faudra, soit un systeme de leds Infrarouge a placer autour de l'écran, soit le sinden lightgun qui lui fonctionne avec un software et pour lequel tu dois impérativement utiliser un cadre blanc autour de l'écran. Si tu fouille un peu sur ma chaine, tu verras que j'ai testé le Sinden.personellement, j'utilise plutôt le gun4ir. J'en ai créer plusieurs déjà.
@@ginzuemulation9265 je vais fouiller encore un peu pour essayer de le faire fonctionner mais si j'y arrive pas j'utiliserai un sinden, du coup si j'ai bien compris t'as jamais eu l'occasion d'essayer de brancher un Gcon directement à PCSX2?
@@WorldOfSyno non jamais.
Good video, but how can I configure 2 guns? I already tried and the steps in the video don't work for 2 guns (Gun4IR)
@@NIGHTKILLER05 yes, it's not possible.There is a new version of pcsx2 that came out recently but I don't know if we can hope to play with 2 lightguns. On the other hand, a developer named Nixx or Nixou has put together a special build that allows you to play with 2 lightguns recognized as gamepads.
❤❤love it
Nice
Thank you Ginzu , it all worked pretty well and thank you again you are my idol❤
Hi. Can I use this method with other games like Endgame and Police 911 for PS2 emulation and Dark Escape Arcade? Thank you.
Congratulations friend! Can you tell me if this setup works on the Nintendo Wii Dolphin emulator? Thanks
think u could upload a tutorial for Aliens Armageddon for us dumb people who only know how to follow instructions and not figure things out ourselves?
Hi! Mmm, i don't use wiimotes now. Only gun4ir. For aliens armageddons, i launch it trough TP, i set it up with my gun4ir in Rawinput mode but it's the same with wiimotes. Then you can play the game directly from TP. But if you want to start/stop automatically MH or DS as well, so you need to make an ahk script and launch first MH ( with admin rights for Aliens ) , then launch DS with the rights options ( see demulshooter wiki ), finally, Run, TeknoparroutUI.exe - profile= aa ( use the correct game profile you can read in the right folder under TP repository )
Hi Ginzu, does Aliens Armageddon work for you? for me once it reached the 2nd chapter, it stopped and went back to the desktop , there is a fix ?
Maybe you should download the game from virus-man website.
Any wy to haveedback with wiimote and dolphinbar in teknoparrot?
Amazing build man! How do you setup the lights to sync with the game like that is it done in teknoparrot settings? Any chance you can do another short video showing us how to do it please?
Thank u. I would like to do that. But i am too busy. This is why i can't do any video right now.to sync leds between the gun and the game, you need another software : Mamehooker aka MH. It's also mandatory to configure the game.ini file to match the device ( here : the gun )
merci à toi Ginzu comme d'habitude tout est ok !! par hasard tu as une solution pour jouer à la version PS3 de hotd4 avec le shaking reload? impossible de recharger car il faut à priori une manette PS4 pour le reload...
Salut. Nop désolé. D'ailleurs, j'ai arrété de suivre l'evolution du shaking pour ce jeu sur rpcs3.pourquoi ne pas utiliser la version TP elf loader2 qui tourne parfaitement ? ( il est vrai que cette version est patreon)
Este procedimiento funcionara para mame
hola, he podido configurar para 1 jugador, con la myflash pero para 2 jugadores no he podido, en los juegos de mame, de prontos sabes como hacerlo.
Solution 1) use 2 mayflash dolphin bar and use mode 2 but it's deprecated. Old solution, no good button binding etc... Solution 2) use Lichtknarre software with one wii usb bar ( not use the Mayflash: no compatibility).
@@ginzuemulation9265 muchas gracias ginzu
@@ginzuemulation9265 , hola ginzu se requieren controles originales o se pueden con no originales
@@danielgamboacastellanos9653 no you need 2 mayflash and use the mode 2. But it's deprecated. Prefere Lichtknare nowadays.
@@danielgamboacastellanos9653 if i remember well, you need original one only.
hi, forgive me, I followed everything, I use retrobat under windows with wiimote and dolphin bar, but unfortunately I get to calibration and then I can't get out of that section, only the wiimoote button works which always takes you back to calibration, if I press the a on the keyboard and enter does nothing
why if I try to set rawinput I can't manage the keyboard and mouse together? teknoparrot crashes. in rawinput mode I have no possibility of associating keyboard inputs like you do in the video. do you have a solution to recommend?
Hi 🤔, i didn't use lichtknarre for a long period of time. But i know i can use keyboard + gun4ir altogether in tp using raw input.... So, why it would not work with lichtknarre.... ? 🤔
hi ginzu! in this video you are using the wiimote as a mouse or as a joystick?
Hi! Sorry , later reply. I can't remember for this video. I think when i began with lichtknarre i was using mouse plugin. But later i always used the vjoy plugin with 2 wiimotes.
@@ginzuemulation9265 ah ok, I use the mayflash dolphinbar and I tried lichtknarre, unfortunately with vJoy 2 I can't configure all the emulators
@ginzuemulation9265 Unfortunately, I cannot get your script to run...even after installing a proper BLUS30528 copy of Time Crisis: Razing Storm and placing it in the folder per your ahk script. However, I have (thankfully) been able to get the game to run on a much later build of RPCS3. THE PROBLEM? Whenever I switch to FULLSCREEN mode, the Wiimote tracking is too sensitive/erratic for gameplay BUT IT DOES WORK IN WINDOWED MODE?! My standard mouse works in both WINDOWED AND FULLSCREEN without issue. Might you know how to (or what settings will) fix this? Thanks in advance!
Hello. I did not play this game a while now. Did you follow exactly what i show towards the end of the video ? If i remember , you can't use this emulator in real fullscreen.
I've watched this video a dozen times but still can't get it to work. Demulshooter recognises my Wiimote as an Xbox360 controller for some reason and so I don't have the 'Enable virtual Mouse buttons' option. When I select the Mayflash PC Adapter from the list, nothing responds on the Wiimote. I've followed the video and put in my own links in the commands but keep getting error messages saying that it needs to load from the emulator? Any recommendations? Works fine with an actual mouse but can't activate ES mode as there is no button for it!
Mmmmm, maybe it is because you run x360ce software somewhere in the background and it cause troubles with DS...
8:20 if you don’t mind me asking where do you find that black part that you screw into the bottom gun hole that helps hold the cables? I’ve seen a lot of gun builds with that and haven’t been able to find it anywhere
Nvrmind, just reverse image searched it and found out it’s called an “cable gland” Interesting name lol
Really nice.....how did you get the large button to flash?? Meaning how did you wire it? I see you used mame hooker to get it to flash.
Solid work dude! 🍻
great my friend! as always great work!! , i try to install it in my crt cabinet! :)
The game is great 👍
Can you tell me what solenoid you used for your gun build?
It's the embeded motor.
What in the name of wizards is this? Selectable fire modes?
Yes! Exactly! 😉
Great video, I’m pretty new to this. Is the tracking and accuracy better with a 4 point IR Led than a Wii bar? Is it possible to just use one of the 4 point IR LEDs from AliExpress?
Yes the accuracy is better. But the 2 points IR leds is also good enough ( just a bit harder to calibrate and you have to stand further away from the screen
i have 2 light guns aimtrak but i can play only with one. Can you send me your ini file ???
i know my id numbers, my numbers mouse etc.. but not work.
To identify the correct id of each lightgun, you should use the arcadeGuns utilities and go to utilities tab if i am correct. Then you should adapte the correct mouse number in the Supermodel.ini file of the model3 emulator. Probleme with this emulator is , if you unplug your usb ( the one of you guns), the id change if you change of usb port...... 😐
Eh oui evolution 🚀
Hey 😊 C’est quoi ton sélecteur là, il est parfait
Hi, is possible to show crosshair of my light gun ??? How to do ??
I haven't used demul for a long time bit if i remember you can display the mouse cursor if you want and replace it by a cross in the mouse settings under windows.