Видео

This engine is sold they range between $4,500-$5,500 depending on hours and condition. Thanks, James Jr

I am not one to lie I honestly have no idea and the internet is a rabbit whole of information If you cant find anything on a forum I would have no idea who you could ask on that. Some of the best techs in the world are on forum sites because they enjoy figuring out solutions or answers to non normal questions or situations. Thanks, James Jr

$7,000 it will come with the prop and a new standard side mount control box. Thanks, James Jr

I've had a few laughs over the years over the head shake. Especially when the they need a carb rebuild or have bad fuel in the lines. Thanks, James Jr

$3,000 with controls. Thanks, James Jr

@@bmrpartsmarine6515 oh no problem also nice motor you did good on it😃

Audio works great on 2 computers and my phone from different RUclips accounts. Could it be an issue on your side? Thanks, James Jr

As long as you take care of them they are good reliable engines. If you go out and beat on them with a hot foot and don't maintain them you will get a year or 2 years tops. But that's the same as a new motor. most of the time when I repower and pull one of these off blown up the customer had the boat for less then 2 years and didn't take care of it doing just basic maintenances oil, plugs, fogging, impeller, and gear lube. compression test show a lot about the life left in the engine.

We plug into with a computer program only dealers and shops will have and pull the hours and any faults they have or had. The standard person isn't gonna pay $2,000+ for the program. Any Suzuki dealer can plug into this engine because it is a Suzuki motor. Thanks, James Jr

@@bmrpartsmarine6515 do these come with Suzuki gauges that show hours ?

The gauge for hours is extra it does not come with the motor unless requested and purchased separately. Thanks, James Jr

100psi-120psi isn't low for a 1988 25hp mercury its normal I've sold a few of them in the last 15 years. we have 3 compression gauges and use 2 per motor we also scope the cylinders for scoring along with a leak down. Its not new but its also not a concerning PSI as both cylinders came back the same. If it was bad we would of put it with the other 200+ part out engines. Some of the later models were 120PSI-140PSI but even those can operate perfectly fine at 100-110PSI. Thanks, James Jr

With translation what your asking does not make sense. This motor was sold awhile ago and is no longer here. Thanks, James Jr

Check the frost plug on the powerhead its normally stamped in there aswell. Thanks, James Jr

@@bmrpartsmarine6515 can’t find the freeze plug, there is a label on the block starboard side , d270080902. #28, then 819603a 8 under that, 00/00, and p/h asy-dressed-08. 40 per/trim. No luck with any of them coming up as a part number. Thx for replying.

Id keep looking for the frost plug just know it may be painted black instead of being silver. Thanks, James Jr

Give us a call for parts 952-894-4888.

I'm not trying to break a hole in the bottom of the tank again.

This engine sold awhile ago I'm not sure what the price was on this one. If the video name has SOLD at the end the engine is no longer available. Thanks, James Jr

MAR-VTSSW-00-KT Make sure your engine is compatible and that you ordered it this kit is an add on like a gauge. Thanks, James Jr

Yes it is the low compression point makes them easier to start you're thinking compression on a 40hp which is between 180PSI and 220PSI. There isn't much info online for small engines low compression. Thanks, James Jr

Depends on the boat and the steering cable. also the old 100hp I believe had 2 blocks a 4cyl or a 6cyl that makes a difference aswell. I've never had a complaint on steering for these engines if that helps. Thanks, James Jr

Buy it cheap is all they are more valuable as parts engines then selling complete now days. Thanks, James Jr

@@bmrpartsmarine6515 What’s cheap for a 13 225 prosx

$9,500-$11,000 depending on condition is normal pricing.

Sold Already. Have a great day.

Unfortunately there isn't much anyone can do or say over the computer. You most like have exposed wire somewhere that the water got to. You would need to take it in somewhere and have actual diagnostics done to figure out why it actually happened. My guess is just that a guess. Thanks, James Jr

Engine oil would be 10W30 or 10W40

Depends what questions? Thanks, James Jr

@@bmrpartsmarine6515 need a source on trying to get just the 8 pin connector.

I apologize I didn't see your reply. Not sure if your looking for engine side or motor side I'm sure someone is selling them online. Thanks, James Jr

This engine was sold in 2022 for $6,000.

It is Sold.

Burnsville MN 55306 We ship motors all over the country with a very good customer base. Thanks, James Jr

I have a 40hp remote Johnson and a 50hp Remote Johnson. We see both remote and tiller outboards get traded in it's random what we see come in and when so there is no estimate on availability.

Burnsville Minnesota.

This one sold for $1,800.

Sold last year for $8,500 if the video has SOLD at the end the motor is no longer available. I leave them up to show we are a reputable company for future buyers and to grow the channel.

SOLD in 2021. Thanks, James Jr

I don't have a wiring harness for it so unfortunately I cannot. Thanks, James Jr

Unfortunately I am not the person to ask on that. The consumption changes per boat weight, prop size, and gear. You're gonna have to find a forum on that info as we sell new and used engines we don't run fuel consumption tests.

@@bmrpartsmarine6515 obrigado, amigo tenha um ótimo dia e parabéns pelo excelente trabalho

This motor was sold and shipped I unfortunately don't have the information on the tiller. Are you trying to make a remote a Tiller?

This engine is Sold but it depends on the trade in and if its local or not as we only sell used fresh water engines. Thanks, James Jr

What's the price for one of them now

$9,500 on this motor.

@@bmrpartsmarine6515 thanks!

$2,500+ Tax or shipping if out of state

This engine SOLD for $8,500. Thanks, James Jr

This engine SOLD for $6,400. If the title has SOLD at the end the engine is no longer available. Thanks, James Jr

This engine SOLD for $13,500. Thanks, James Jr

This engine SOLD for $3,000 in July of 2022. Thanks, James Jr

We upload regularly Subscribe so you don't miss the next one. Thanks, James Jr

This engine sold a few months ago for $6,000. Thanks, James Jr