- Видео 2
- Просмотров 35 536
Clay D
США
Добавлен 21 янв 2014
DIY weirdo. Join us as we fix things, build things, hunt things, and fish things.
MEDAL OF HONOR SSG DAVID BELLAVIA gives motivating speech to IBOLC graduates
SSG David Bellavia delivers keynote address to US Army Infantry Basic Officer Leader Course (IBOLC) graduates at Fort Benning, Georgia.
David Gregory Bellavia is a former United States Army soldier who was awarded the Medal of Honor for his actions during the Second Battle of Fallujah. Bellavia has also received the Bronze Star Medal, two Army Commendation Medals, two Army Achievement Medals and the New York State Conspicuous Service Cross.
David Gregory Bellavia is a former United States Army soldier who was awarded the Medal of Honor for his actions during the Second Battle of Fallujah. Bellavia has also received the Bronze Star Medal, two Army Commendation Medals, two Army Achievement Medals and the New York State Conspicuous Service Cross.
Просмотров: 2 750
Видео
Audi A7, A6 (C7) Front Strut Shock Replacement
Просмотров 33 тыс.5 лет назад
IF YOU FOUND SOME VALUE FROM THIS VIDEO HIT THE LIKE BUTTON AND SUBSCRIBE MORE DIY HOME/ AUDI/ AUTOMOTIVE CONTENT TO COME Replacing, repairing 2012 A7 front struts/shocks. Will work for A6 as well. C7 generation of vehicles. edit it is possible to remove the strut without disconnecting the upper control arms, if you want to avoid that process Tools used: -2x KYB Excel-G struts from RockAuto.com...
Good video but i would cut out the pickle fork. All you need to do is grab that same jack you have and the suspension to ride height slowly as you raise the suspension just pull them upward. If you can take the bolt out with your hands, then you can just give gentle bumps with your palm upward and they will easily pop off. If it doesnt then that means is time to replace them
What part of Tennessee are you in?? I need Audi a6 2.0t suspension issues
His speeches never miss, even tho i’m an enlisted cav scout
Excellent video, can I get advice from you please? I had replacement 2weeks ago I have done 300miles. My wheel arche is 5finger from tyre. Car is extremely high now. Garage saying they got correct shocks. What do you think?
That blue cord hell yeah!
* *ALRIGHT DAVE!!** You have my 100% support. This coming from a 20 year, US Navy man holding a Top Secret Security Clearance - crypto level SCI. When's the Bar BQ and what can i do to help you run for office? By the way, I graduated high school with David Dipietro. - Keep your faith, brother.
If anyone's reading, never use "pickle fork" on good joints. Especially in this application you can go from the bottom with a small punch. The stud on the joint of the arm is even indented for the punch to fit good.
And if you do use a pickle fork- be warned that your ball joints will still function fine years later.
@@clayd7442 not with a torn boot - they won't. And that surely will happen when you put a "pickle fork" on a ball joint.
Thank you. You know what if it was me id fu.... edit the part your tore the boot of top cnt arm but you didn't and one learns a lot from such mistake. Thanks
Lessons learned! It’s still doing great with no issues despite a full winter of salty roads!
Will replacing the shock absorbers mess with the “ACC” ? I wouldn’t want to have to pay 600$ to recalibrate the system.
This replacement didn’t affect my Comfort Control function. For the $300 to DIY this, you would still be ahead even if you did have to get a dealer to calibrate.
Awesome work Clay, thanks for saving me $$$
That’s why I made the video! Happy to help!
oofff only thing those separators are good for is destroying your balljoint boots. Now ya gotta replace those aswell. Those forks are a LAST resort only
Been through lots of salt and weather, still greased and still working! I know they got a tad beat up but still doing the job!
your upper arms are fucked now... the grease is coming out and the rubber is fucked. And you don't need a c clamp you can just slide them back in... You have to sand or file the holes from the upper control arms and pinch bolt. And use anti corrosion grease like Loctite 8060 on the upper control arm ends en the pinch bolt (best te replace the old bolts to) the pinch bolt is 40Nm.
@snippii they’re still working great. Still greased, still working, no noise. Years later. So..
Could you share the link or exact name of that special tool kit? Thx
@junoon Winmax Tools on Amazon “39 piece Strut Shock Tool Kit Removal Nut Socket Set Absorber’s Top Lid” Long weird name but hopefully that helps.
@junoon 39pc Strut Shock Installation... www.amazon.com/dp/B07X9KHQNY?ref=ppx_pop_mob_ap_share
Very nice. I do appreciate a non-silence video of yours.
Can you get the strut and spring assembly out without removing the upper control arms? Like, since they're not connected to the strut is there enough room to finagle the strut assembly with removing them? I hear that pinch bolt can be a real nightmare. That's a gamble I would like to try and avoid...
if you are a magician, perhaps. but i wouldn't waste the time to even try it. Even with UCA removed you STILL have to pry down the assembly to get the strut and spring out. The pinch bolt isn't bad, you just have to use a wedge to pound it open and slide the bolt out. It doesn't hurt it one bit. After figuring out that trick, that part of removal took me about 2min.
@@clayd7442 Dont say "the pinch bolt isn't so bad" depending on the years and usage. I needed nearly 5h to remove my right one with an hammer, air hammer, decisive, drilled them out for a bit and heated the arm (fucked joints guaranteed 'the rubber') LOOK OUT for the gaps in the arm if the bold is to stuck then you can brake the sides of the arm (expensive joke) make sure to sand every hole in the arm to remove the corrosion! use grease (Loctite 8060 for alu or some kind) Try to hit the control arms with an decisive on the underside and don't use a fork if you don't have new one's the one's in the vid are fucked (no offence)
Yes, you just need to support the spindle from the top to take pressure off of the upper control arms and then remove the outer tie rod. That's the procedure in the factory service manual.
Update: thanks for the advice everyone. It appears I am a magician then lol. It came out with no problem without having to remove the upper control arms. Remove the pinch bolt for the strut mounting arm and the other side where it bolts to the lower control arm, push down on the lower control arm and it wiggles right out. Peace of cake. Thanks everyone for the input!
My bolt was/is fully stuck. The nut came off fine and easy, no matter how much I hammered, wd40’d, the bolt didn’t budge. In fact the end of the bolt ended up squashing and the thread mashed together 🙄. Managed to get the nut back on in the end and called it a day before I ran out of day light. Will try again another day without removing the upper control arms.
Lol tool spec " big ass hammer"
Great video thanks.