Видео

I wanna say thanks for your video, I have a '13 Fusion SE and your steps helped me to replace my front struts...it was my first time doing them....took some time but it came out good!

Hi if the lx battery is marked bad you have to clear the eeprom on the board inside the pack, the battery Will work but the ups Will show it as bad

Doing this now... 8ne thing I always forget, to set Ebrake.

For future reference that hose is for the windshield whipers you can disconnect it to remove the weather protector

You dont need to use anything to hold the head of the bolt it wont move because of how its built. Just need that 24 socket. Either use a impact, but if these bolts have never been taken out before, might want to use the socket with a power handle.

We had ours replaced at the same time we had the transmission out for a rebuild. That was about 3 years ago. The strut mounts are making noise again. I haven't decided if I'm doing it or paying someone. The kids are gone and my wife can't help me.

question, how loud is the DS60 for normal use? I have a few Netapp 4246 I am thinking about replacing with one of these. Trying to understand the differences in noise.

Awesome content,Learn valuable info.

CNt see anything too dark

Where do you jack it up from? Lower control arm?

Does it support sata 3 hdds

I just changed my struts after work today and I've never even changed brake pads. This video gave me the confidence to do it. Thank you so much it was so easy!

I really enjoyed the video I would like to know the the exact tools I would need and do I need 2 jacks great video…

Today I learned...thank you!

Yeeeee thank you sir

helpful

Thanks for the Vid man. The only issue I had is when it come time how do you use that hammer to tap out those strut bolts for some reason mine wouldn’t budge any suggestions?

Couldn’t make it past 3 minutes. Horrible. Why waste your and our time with horrible views and poor lighting.

Perfect video noble s*** straight facts you got a good new subscriber for life

Perfect easy, thanks for showing how to get it out of that clip.

gorgeous

before replace you must change system ups to by bypass right?

🌐🌎🏗🧱

I learned to swim in this lake fifty years ago.The only house on the lake back then was the Cooke camp on the far end of the lake.You should check out the camp if it's still there it was a large compound even had it's own railroad spur by Anoita hill.

Really useful!

Excellent video

This video literally ended on the part that I needed to see lol. When I go to jack up the wheel assembly, it puts pressure on the pinion and looks like it's going to pop it out. Everything bows out in such a questionable way that I feel like I'm going to break something.

I am changing my struts on a 2013 and I am having trouble getting the top nut in. of the bottom two on the bottom of the strut. Any advice? I put the bottom one in first and tightened the sway bar.

So it is a different setup on the non hybrid. Learned that today, lol. Still fairly easy to do and can be done in an hour.

I have a 2016. I am replacing the struts and tires. Is alignment necessary?

Beautiful....weird fall hey/ Some places are covered in snow, turn the corner and big beautiful tree in all it's splendor!

How many miles were on the original set? I have 95k on my 2014 and am probably going to replace mine in the next 6 months, along with my brakes. I'm hoping the bolts and nuts aren't rust welded on with being in Michigan. I replaced the shocks on my wife's van and had to end up taking it in to a shop for the rear shocks because I couldn't get the bolts loose.

John, I have a 2017 Fusion, do you suppose they are the same or similar enough? I am replacing them for popping noises. Thanks

Very nice, very niceee

This is very informative. I thought replacing these struts would be way more work but this looks pretty straightforward actually.

Great video! I change my shocks last summer after a friend notice a distinct clinging noise which I concluded was the shocks. The sound went aways. I didn't get the best shocks, so now in paying for it because the noise has returned. I'm going to change out the struts again with quality ones this time. If the noise persist, I'll change my shocks with the help of your great video!

Do you tighten the top 3 bolts last????

Do you happen to know the torque specs of the 2 main bolts (to knuckle 24mm), the sway bar bolt (18mm) and the 3 upper mount bolts (10mm)

That DS60 cabinet is installed in a wrong way. The cover have to be secured to the rack with screws. When you take out the cabinet the cover still in the rack.

Thank you! I am glad I noticed toward the end of your video that you also have a Hybrid. I have 2015 Hybrid. I have done struts on a '98 Cadillac, but that was a decade ago.

Is there a specific torque spec for the top 3 strut bolts

Thanks

👍👍👍👍👍

You've got it all up there! It is soo picturesque, rustic...you might say, "Pure Michigan!" (what a slogan!). I visited that area many years ago. Fell in love with it! I would love to move there but there's a few things that get in my way. More like 200+ things that get in the way! 200+ inches of snow that falls there every winter! Sorry! I hate snow! I cry everytime I think about it! It's just so beautiful up there!

Good video! Thanks for posting 👍🏻

It's very nice video, thanks for sharing!

That weather thing ur talking ab is called a cowl

Sick footy!🤘🏽

Thanks for giving videos

Excellent video! This is also relevant for the 2013-2018 Taurus, you can add that to the title for more views. May have the tiniest differences, but TOTALLY helped me out! Thanks so much for taking the time to edit and share <3