Видео

That really long cable accommodates recumbent trikes and/or mounting the battery on a rear rack.

that extra long cable is to accommodate recumbent trikes and bikes..

is that kit the Tongsheng TSDZ2 8 pin.. ? or the upgraded model..?

A nice Video!

how does the gear sensor work? how does it know what speed you in ?

Long battery cable. There are many on, or off-frame locations where users may have the battery placement that is optimal for them. In some jurisdictions where more stealth (or less unsprung weight) is desired, riders carry the battery in a small pack on their back and route the cable through the water bladder hole on the pack. For them, even the long cable may not be long enough. Seems like one solution would be have an XT connector right at the motor, and offer battery connect harnesses of different length so the rider can curate his desired battery carry location and have a more appropriate matching cable length.

на русском можно? какая у них разница?

так что лучше и как в деле эти моторы?

почему по-русски не говоришь? нужны более конкретные отзывы, максималка,расход и т.д

wonderful video! thank you! I am considering a CYC motor for my mountainbike and this helped me see the differences.

hello what are the types of hall sensors u use and where to buy them i got the same board and error 08 on my bike, because the chips are glued 2 of them are broken

Good video, thank you. But you really need a different camera. So hard to see what your are doing so far away. It would be wonderful if you were selling peg boards or work benches, but when what we need to see is only 5% of the bottom of the screen, it makes you want to change the channel.

Wiesz gdzie można kupić części do tego silnika? Potrzebuje łożysko jednokierunkowe

Funny how your battery cable was too long...i received mine today and the battery cable was tiny. There was an xt60 plug on the motor and a small xt60 fly lead to connect to battery. Probably would've worked if my battery was on down tube but mine is on the back rack so it wouldn't reach. Had to put a join in and extend cable. I upgraded from a tsdz2b and the difference was well worth it.

Can we put smaller chainwheel like 32t 34t 36t....this 44t is just not a MTB friendly ...Thanks for the video !

Have you ever opened a mid drive motor to repair a hall sensor issue?

All bullshit!

Salut et merci pour la vidéo. Savez-vous ou je peux me procurer uniquement le plateau déporté du TSDZ8 et s'il convient pour un montage sur le TSDZ2b ? J'ai monté le vélo tout suspendu de ma femme il y a quelques mois avec un TSDZ2b. A cause de la largueur de la suspension arrière, j'ai du ajouter une rondelle coté plateau, et la ligne de chaine est très mauvaise, le plateau est aligné avec le pignon 8 sur 9.

Cool comparison. It's shame that the motors were not labeled better to make the comparison easier to follow. Same for the chain rings. On the next video please lover the music as it makes speaking less understandable.

Co to za klucz do dokręcania nakrętki silnika ? Możesz dać namiary na niego ? Gdzie go kupić i jak się nazywa ?

PERFEKT, herzlichen Dank für diese Tipps. Platine getausche, mein Bafang läuft wieder! *****

Here's a idea, sell your shit e-bike And install this mid drive on a quality MTN bike.

I got one of these recently and am currently mounting it on a two wheel recumbent bike (HP Velotechnik Speedmachine). So far very straightforward.

Merhaba, üç tekerli bisikletime tongsheng 750 w 48 volt kit taktırsam yokuşlarda çıkabilirmiyim, arka sepette iki çocuk taşıyacağım, tongsheng mi, bafang mı tercih etmeliyim, hangisi daha iyi?

Dude you completely tore off the double-sided tape 😂

Thank you so much for this. I just installed the TSDZ8 kit from Varstrom with the Bluetooth display. Your video was very helpful! I put the kit on a early 2000s Giant Warp DS2. I'm still waiting for battery delivery. Cheers.

I often slightly push the pedals with one leg and brake at the same time while waiting for a green light. So... so it is a thing where it is a good thing to have brake sensors. ¯\_(ツ)_/¯

Why in the hell do you think this annoying music has any sense?

I cannot watch this crap.

I had to seven motor DM01 and 02 for wife , and had bad experience, their torque sensors broke after 1000km (I am courier so it's less than month ) DM02 was broken after first ride ((( After company send me second time two motors DM01 worked even less and again was problem with torque sensor . DM02 wasn't even unpacked second time , finally returned my money but take commission (can't understand why I pay for their unworking stuff) , so I wasn't glad with motor. Need to say it's perfect when it's work for sure , but still when you pay 500+ CAD , expect more than month.

Thank you for the video. What is the yellow cable coming from the motor? You said Gear/Shaft sensor, what does it mean?! Thank you again.

Can it be used under rain? How is water resistance?

Are you drunk in this video?! 😮

Obviously your not an engineer 😂

Hi Accolmile does not fix any failure, just lying about 1 year warranty, I bought their product, fails in one month of use, wouldn't take in charge the fix and they have no fix center in France or in Europe. I lost money and time with their sell service, very despointing. Buy bicycle from who has fix service exists in your country

thank you for this real installation video! how is your reviews about the motor ?

Has TongSheng a bottom bracket 120mm?

If you want a good vid on Dm01 high voltage does a much more professional video.

Great video! Can you please measure and write what is the gap between axis and the motor? I see bafang has more space, but can you measure? I have a bike with a lot of excess metal around the hole. im wondering the motor can fit.

You skipped demonstrating the drag of the Bafang as compared to the drag of the Tongsheng but I noticed you had quite difficulties to turn the axle by fingers by Bafang, then with the crank it was quite easy by Tongsheng. Is the drag by Bafang (when you have to pedal without battery) truly bigger right?

We need lightning bear reviews. We need more testers. We. Need. It

I suspect the build has changed with time...i saw a teardown where the wires going to the controller were sealed with silicone

Could you name the Hall sensor type suitable for Bafang BBS02b? That would be great. Thank you!

4:47 Please don't come near my bike.

If you're going to make a video like this, I suggest that you make a script so that your English gets coherent and doesn't have sentences like "You can open without opening" (heard when you dismantled the controller module). You also need to know where you have your camera lens so that you don't move around objects in view you want to show - Learn about perspective. You can't view things from your angle that is offset (= out of alignment, usually from a center or starting point, which is the word I think you were fumbling about in the start regarding the chain ring) from the camera. The music was too loud too, to the degree it was annoying and stole focus of the audio. Keep practicing your English and try to fine-tune your accent so it doesn't slice through the words like a chainsaw (For e.g. Finnish people do this, for reference. They sound awful! Sorry, but it's true!)

What a badly described video, and your music over the top was just a bad choice and too loud.

My motor won’t stop after you release the throttle or stop pedalling it only stop when you apply brakes or Set 0 PAS. I did change the hall sensor but the problem doesn’t fix. Hope you can help me.

è possibile sapere la psw avanzata per entrare nel menu?

Great job

Its priced extremely affordably, really if you buy one and don't like its not a huge loss.