Видео

If i use both the pc and ios cable, will i be able to also hear both the audio from my pc and from my ios device using the interface's monitor device??

Thomas Ruth Hernandez Jason Thomas Cynthia

Gonzalez Steven Gonzalez Amy Lopez Melissa

I’m blind and have been using all kinds of recorders for years. From Philips DCC Cassette and Minidisc and then digital recorders. I’ve been a bit stuck with Olympus latterly as they have featured voice guidance for some years now. Was delighted when the Zoom Essentials came out with their much publicised accessibility via voice guidance. The voice guidance is really appreciated of course but, because it is based on pre recorded text to speech files, rather than a dynamic screen reader, it is very limited as to what it provides. So, yes, you get spoken menus along with friendly beeps which, for example, are toned differently when turning the volume up and down. You don’t get things like remaining time; how much recording time a recording in progress has taken, you can’t hear what files by name you have when browsing back over previous recordings. And so on. All that said, there is a lifeline. I purchased the Bluetooth receiver and installed the H6 essential app onto my iPhone. This is where that dynamic screen reader thing comes in. I was able to hear every aspect of what was on the app screen which was essentially a mirror of what is on the actual recorder. So, I do commend Zoom over all for what they have done, especially as the IOS apps are so accessible, the downer is that you can’t do all those things onboard of the unit itself and I don’t think there is any way they could update the TTS files to reade more as elements such as timings are fluid and can’t be pre known and thus accounted for.

Hey, Hank! Can't believe I missed this video. Been looking forward to Rode selling this separately. Quick question! Does it fit the ZDM-1 snugly enough? Might get it for aesthetics. Hahaha!

Can I just get the rode podmic and the behringer um2 audio interface and connect it to my pc to sound good for streaming calls etc?

My favorite part was your editing and voice. You did a really good job 👏

Side note forgot the nt1 is apple now 😂.... it is tempting to buy 1 for the color these days. Never owned a mic that wasnt silver, red, or black. Imagine pink etc 😅 that would drive me nuts though

The voice 😂😂😂 lol I couldnt make up my mind if you were teaching or selling. The voice kept going back and fourth. Enjoyable video liked the hype. Keep up the fun man 🎉

Which mic should i get in the $185-275 range AKG P420 ($185) AT2050 ($200), LCT 440 ($250) AT4040 ($275) I'm a standard - low tenor voice. Using ONLY for vocals to make music, not for instruments.

Way to go just what I'm looking forward to your channel is helping me for sure Hank!

I just had to comment that this has got to be one of the most retarded, or audiophile purist idk, videos i have ever seen. Fucking physical solutions? Get the fuck outta here

How do I record on fl studio with it

Consistency

SUBSCRIBE TO MY CHANNEL: youtube.com/@FreePodcastTools BECOME A CHANNEL MEMBER AND GET SPECIAL PERKS: ruclips.net/channel/UCj--AN4bOgDvtilC3700iNgjoin RUclips STORE: ruclips.net/channel/UCj--AN4bOgDvtilC3700iNgstore

you just talking too much around and around without cutting the meat. no one have a free time to hear your stories man, if you go on youtube, you should do a better job to help someone else, don't spend you microphone, and get pay by youtube, don't talk to much about your stories man, anyone can learn and build the better computer than you. just stop show up and telling all kind of your story, wasting someone else times, if you want to be famous , then you on the TV, and make a show then lot more people want to hear your stories about you streaming stupid games computer. sorry for saying this, but you just telling too much about your stories man. waste other people times, don't do the good stuffs to help others online community man.

Shanahan Tunnel

Great info and I'm looking for start up equipment thanks!

Great video. Thanks for being genuine and giving us a solid option. Happy to support you and am going to click these links below and purchase. Thank you and God bless

Is this audio interface better than others? Example: Behringer umc204hd or scarlett interface 2i2 or zoom ..... Thank you

Definitely, low cut off, IMHO. There is definitely a warmth and fullness with the AKG. It is also a very transparent mic, which I would expect out of the little brother of the classic C414. FYI, I use a C414 as my routine mic for podcasting and meetings. I'm running it cardioid, and in that format the two behave rather similar, though there is a bit better quality with the classic. With proper gain structure, this mic is a very good candidate to take off axis so that it's not stuffed in front of the camera. One thing to be aware of with these mics, which relates to their transparency. They are much more sensitive to the pre-amp than many other microphones. TASCAM and ART pair well with them. It's fantastic with Focusrite. Yamaha pres can be very good, but can sometimes feel a bit bright. That's fine when you want the brightness; you just need to be aware. One thing you absolutely need to try with this mic, just for the fun of it, is to play with the proximity effect. You'll want your compressor tuned and probably some gentle soft-knee limiting, but do it! You got from the room tone that you typically get, to that "on the break" point that we normally go with. Then take it in close in that one-to-two inch range and hear that "Big FM Radio Voice" kick in. It's just fun! 🙂 Going for something lower end to this can be interesting. There really is a "grows on you" aspect to it. It's also part of the difference between a dynamic and condenser. A lot depends on your voice and matching the mic to it. Do you need the smoothness more or the clarity and crisp response?

Personally I liked the "across the table test." Very creative and useful test. I have NOT ever seen that before. I liked the FLAT profile the best. Your voice seemed more "rounded out." I have a the AKG P420 and the P220 and like them quite a bit. Currently my quest leads me to look for my ultimate "forever" mic. At the moment that would be the Lauten Audio LS-208. I have heard it on other peoples voices and DANG... I almost would believe it was forged from enchanted materials and polished with magic pixie dust and brought to life with incantations. LOL. the only thing holding me back is ... the price!!! LOL Go figure. Someday I make that purchase. I hope it sounds as good with my voice as the ones I have heard. Until then the quest continues to see if something else is available that will bring it down a notch. Thanks for a great review.

SUBSCRIBE TO MY CHANNEL: youtube.com/@FreePodcastTools SUBSCRIBE TO MY PODCAST GEAR NEWSLETTER: freepodcasttools.com/newsletter/ BECOME A CHANNEL MEMBER AND GET SPECIAL PERKS: ruclips.net/channel/UCj--AN4bOgDvtilC3700iNgjoin RUclips STORE: ruclips.net/channel/UCj--AN4bOgDvtilC3700iNgstore

Thank you sir 👌👌

Czy można podłączyć bezpośrednio do usb c smartfona i nagrywać wideo z dźwiękiem od rejestratora?

I think i gonna buy it and see how it goes, i going to use it to record a guitar directly, the gain to record guitars its enough, some interfaces set to low gain. Nice video

good points

IMPORTANT NOTE: I HAD TO RE-RECORD THIS VIDEO 3 TIMES! I'M HAD ISSUES WITH THE MAIN VIDEO GLITCHING SO THAT'S WHY THERE IS SO MUCH B-ROLL. THE DEVICE WAS SENT BACK SO THERE WAS NO WAY TO KEEP RE-RECORDING THE SAME VIDEO OVER AND OVER AGAIN.

Will it have direct monitoring? Any info about latency (monitoring & roundtrip)? Thanks

Thanks for the review. Unfortunately the unit is not available in Australia.

Thanks form Chicago

Watched the whole video... LOL... and have some questions that I do not believe you addressed even though it was pretty thorough. Can you please tell me how tall the single most arm is from the desktop to the top of the arm articulation where the gas spring is connected? I am trying to make sure it will fit under a monitor that is already mounted. I noticed in your video that when you moved the Rodecaster at one point it nudged the monitor behind it. At this point having some time behind you with this setup would you use the same style single mount or would you use something else like a pole mount with a multi section swing out articulated arm configuration, i.e. no gas spring. Also have you had any issues with the rode caster moving down when you press the buttons on it? Found this channel trying to find information about the Vesa mount size. Lots of great information and well presented. Subscribed.

I am a content creator, but I am not a professional one. Which option is better? F3 or H1 XLR? I will use it for interviews, podcasts, streamings... Greetings from Spain.

NOTE: THIS VIDEO WAS CREATED DAYS BEFORE THE PRODUCT'S RELEASE. THE PRICE IN THIS VIDEO IS INCORRECT! IT RETAILS FOR $149.99!

I agree that bluetooth should be included

Sounds like a replacement for the Zoom Podtrak P4. Obviously less channels, but for the podcaster looking to for a device to be an interface and record at the same time, this would be it.

Hello maono ps22 vs focusrite 2i2 3gen witch better audio interface. Please answer me.

None of these are connected to a cloud lifter ? I could hear the difference tho. The Rode is a bit quieter and has more bass.

the only con with this mic is that there's no gain control on the microphone. I use it as a USB plug-in on Mac OS and I turn it all the way up, the voice is still a little too low (which is quite the opposite of my experience with a Blue Yeti - this one, gain goes through the roof and the sound starts breaking)

41 pounds!

You received it, nice! Sure does look like a better fit than Rodes official cover. Was the packaging good? Like no scratches on it? I watched another review of it and it came damaged for him.

Looks like a solid product. They apparently make these for a bunch of different devices, including RØDECaster Pro II. May need to pick one up.

I have the m-track solo, maybe a better value with its two inputs

Hank, I knew you'd come back after you said you'd be going out to get milk.

The UM2 is good for people dabbling into podcasting. If they're looking to make money, I'd recommend the UMC22. The Midas preamps are much better (and quieter).

Around prime day, Amazon had the vocaster one for $50. That would be a much better value than the CX1 for $35.

Am I understanding correctly that you need to buy King Bee II as well if you want to have a pop filter for your Worker Bee II?

Hi Hank so far so good but big issue I have is setting my output especially the XY mic. The manual said set on -20db but I find this low Should it be +20db

Agreed!

I love the k669d, especially for the price. I just released a video of my custom k669d if you want to check it out.