Видео

I would assume Fender and other large companies use some sort of epoxy or wood filler to seal their bodies as well, as far as tone goes I have noticed no difference in the wood tone

And you’re most welcome! Hopefully this helps 🙏🏻

The wiring is pretty straight forward on this one! Once you have the new pickups in you just cut off the tone pot and wire the bridge ground and input jack ground to the back of the volume pot!!! If you want I can send you a photo if needed? Are you on instagram or facebook?

I will say i may add in a different capacitor to darken up the sound but even just swapping out the stock MM Squier pickup made a world of difference! Thanks for watching 🙏🏻😌

Unfortunately you’ll only be able to add ram and a SSD to this laptop, the process is soldered to the motherboard

I was able to run Davinci but it was slow, you’d have to edit the timeline in 720p and anything more than a 4K file would bog the system down so take that into consideration

@@JordanHandwerker Thanks Jordan!

@wasntborntofollow you’re welcome

@@elbajoceleste I made it myself, I bought the material from Amazon

On a wider angle lens even though it’s a 38.5mm full frame equivalent at f/3.5 it won’t give you the same blur as opening it up to f/2.8 although most of my subjects were shot up close so if you are using this lens for let’s say mostly portrait work than even at f/2.8 it won’t have a lot of blown out bokeh

Idk why not 🤣

Every slider may have different mounting points, mine has 2 on each end ( 1/4-20” and I think 1/2 or 3/4” mount points) and than one in the middle where you’d attach a base or tripod. I prefer the end mount points as it doesn’t allow the slider to tilt on axis meaning if you use just 1 tripod in the middle the weight of the slider and camera will shift weight to one side lifting the other side up. I used 2 Andicine 1/4-20” quick releases and mounted them to 2 inexpensive light stands and I’ve never had an issue with any sort of balancing problems. hope that helps

I’m not entirely sure, there are 5 individual cartridges but I think they all run on the same print head

@JordanHandwerker ok thanks, I know that was one of the benefits of Canon printers, so was wondering if all those inks had own heads. Have an Epson wide-format printer now where the heads are clogged dead and need to replace with other wide format

Yeah that Sigma is a beast for sure! Even my Tamron 70-210 is quite hefty in comparison to the 70-300, I really wish canon would have had a budget 70-300 with image stabilization but that one’s a little more expensive than this base lens! I really feel this lens while is does have some softness can easily be stopped down to help sharpen up an image no doubt

Don’t feed them man, it’s not worth it!

Thank you 🙏🏻💚🤘🏻

@@JordanHandwerkerwelcome homie

@bfd210 😎💪🏻

@@bfd210 thank you 🙏🏻

@@ananyasharma9093 I did mention if the donations got over a certain amount I would do international 🙏🏻 unfortunately I don’t think we’ll hit that amount

@@JordanHandwerker i understand thats why 😅

Unfortunately it really depends on what you’re looking for in terms of photo video, this one is nice because of its size but only has a full frame equivalent of 24mm-70mm, the 4K and 1080 are good on this but if you’re looking for more telephoto capabilities I’d go with the G7X, not many 3rd options but I feel the Sony will have better video in the long run if that’s your main focus.

@@TheAgentAssassin I use it on a daily basis, battery life seems to have declined over the course of a year but it’s still as fast as it was when I bought it, but I don’t do much gaming, mostly photo and video editing

@@JordanHandwerker Thank you for the reply.

@@TheAgentAssassin you’re welcome!

Thank you 🤘🏻💚

Thank you 🙏🏻 💚 good luck!

@@danielblodgett1 thank you 🙏🏻

Definitely 🤘🏻

Thank you 🙏🏻 💚

Thank you but the contest has ended 😌

@@andrewkunyev5243 I have not but I have had other Rokinon/Samyang lenses. This one is definitely sharper and has less distortion overall

Yes but that’s a fisheye, this lens hood is not detachable

@@JordanHandwerker zo zo, weer wat geleerd.

@frutt5k het is altijd goed om nieuwe dingen te leren

@@JordanHandwerker dan zou ik als ik jou was een cursus engels leren. Dan begrijp je mijn opmerking wel.

Kinda hard to understand what you’re talking about at this point? The 8mm fisheye lens which I’ve done a review on has a detachable lens hood, this lens has a fixed lens hood, what are you getting at?

@@theraditz I will say the stock ones sounded good too! I had replaced the bridge with a Gotoh and the tuners with Schaller tuners and Dunlop strap locks, as well as the pickguard

Definitely!

Good to know!

Definitely!

It was a fun drone! Definitely worth it for beginners

@@Spooky0910 I ordered mine from Warmoth, although you can probably find them with others, like Alan Corona or WDmusic

Multiple reasons, they test the drone in an environment where the terrain is probably very flat or they test the range where the terrain drops down so there are no obstructions, little to no wind conditions, clear line of sight will get you a lot further than an area that has homes, trees, WiFi and electrical interference

When you have batteries in the unit that aren’t completely dead, so you swap out one battery before it dies so you can keep recording

I have not had any issues with the printer, I would contact Canon with your issue

Awesome!!!

I have not, which camera body are you using!?

@@JordanHandwerker R5, i have 3 other L lens, 24-70, 70-200 and 100 - 500. I had not experienced any noticeable image problems till this lens. Problem is at 15mm not at 20 or 30mm.

I also have the R5 and didn’t experience any vignette other than what was tested, you may want to send it into canon

No doubt about it, the SD MM sounds much crisper and more punchy, but I will mention the stock Squier pickups isn’t terrible as long as you keep the Volume and Tone at 10

As long as you keep your shutter speed fast enough 1/250 or faster than you shouldn’t have an issue with sharpness, as long as your adapter is Canon, I would assume cheaper adapters may lack in the speed next to a canon adapter. I would say if you can find a cheap used version of this lens than go for it! I have definitely seen people use it for sports photography. The AF should be good enough for running subjects, as I have used this lens on drift/car tracks

​@@JordanHandwerkerAlright, thank you very much

@nicolotiderechte1812 you’re welcome

I would love to do more drone content! Unfortunately it’s getting the drones first 😅

@@ggukgee3680 thank you 🙏🏻

@@AllanCorona definitely! I feel this quality is a little better than the Fojill guitar but non the less, a good buy for someone looking to build their own instrument

I’m not sure why? The one on canons website says it had 4 stops of image stabilization www.usa.canon.com/shop/p/ef-s-18-55mm-f-4-5-6-is-stm?color=Black&type=New

I took a photo but this damned app won't let me share anything but videos so I don't know what the hell to do.

@@charlessands3458 I think you can upload a photo through the app as an update

@@JordanHandwerker: I can't seem to find that option

@charlessands3458 hit the (+) symbol on the bottom of the YT app and than swipe to the left at the very bottom when it pulls up your videos to upload a short, it’s there you just need to swipe