Видео

Acura integra distributor o ring

Acura integra window regulator replacement

Tools used: impact gun, PB BLASTER, 12mm, 14mm, 17mm, 19mm I used 3m silicone paste but you can use white lithium grease this is a good opportunity to inspect your coil overs pre load and heights , these were in my car for 3 years

1998 Acura integra Ls , had this oil leak for the past 6 months or so , I would add about a half quart of oil every 2 weeks and I taught it was my rear main seal that was leaking. Thankfully after cleaning the engine bay I noticed oil drips coming from the oil pressure sensor wire. I had to use a pick tool to remove the rubber boot that was hardened over the sensor and as soon as I pulled the c...

So after doing this my car idle was fixed, 600 rpm after 5 min warm up in about 70 degrees F out side temp, the check engine light came on for p0171 and p0170 ,later that day I found an exhaust leak by the v band connecting the down pipe to manifold, i got it welded and now no more check engine light ,Also I found my rotor screw from inside my distributor cap off and chewed up the rotor and con...

Intake plenum removal

Having trouble with these nuts ? Lol try a ratchet and pliers