Видео

I've had 3 S10s a 89 98 and my current 97 Sonoma which I'll never sell I'm to far into it to even get half my money back at this point but the steering wheel always got my hands dirty which whatever but little pieces would flake off an land on you an get the floor dirty then you'd transfer that to the shifter where your hands were dirty etc so I ordered a steering wheel cover an have the center piece where I believe there's an air bag I can't say for sure I don't know vehicles like that to know but I assume there is but I paid to have the center piece/air bag redone

Tried this on passenger side snd it worked until i switched from low beam to high beam then i lost my low beam. Even after putting the old bulb in. Also lost both side markers. Now I'm lost

Ha! Not doing that. Nope. Hell nah. Fuck no. My heater core stays as it is. Thank you for the vid! 😂

This is an awesome video! Thank you. My A/C won't fully blow through the main vents. It sounds like a flap isn't closing correctly to allow the air to come through the main vents. What do you think that could be?

Good job 👍

The amount of knowledge I got from this video, my brother recently passed away and now I have his s10. These all the upgrade its needs thanks man

I know this is almost a year later, but you got a parts list you can put out? if not no biggie just some googling away lmao

I’m just on my moms phone

I’m his 8 year old daughter

Hahaha that random fart had me rolling 😂😂😂

I put olds bravada leather power heated seats with a zr2 blazer 5 speed center console all direct bolt in just had to add wiring harness for the seats

Where did you buy your parts from?

Honestly idk why RUclips suggested this video, but glad it did

Thanks!

I like the old sealed beam version with LEDs and glass

I have this exact car and year and since i got it at 269k miles it has had a wavery idle at cold starts but as soon as the thermostat opens it goes away and runs normal. I got a cold start idle air control valve off a car from a junk yard and the normal isle air control valve since its a hard part to find and expensive for a honda 😅 I also am doing everythi you just did to yours. Mine leaks from the distributor O ring still but ive stopped the valve cover from leaking with a new gasket and adjusted my valve lash since it sounded horrible lol These cars are awesome for a new mechanic to learn on Quick edit: the distributor on these cars has nothing yo do with the timing too lol, just spark and stuff. The only way to wack out your timing is to get an ecu thats been tuned so the narks are not neccessary

Dont be so mean to steve

why are you not using an AFR gauge

Where is resistor located?

Dude! Thank you, I have a 97 single cab which is also a 5spd and I also replaced my worn out 60/40 bench with pristine 98 buckets. I too am looking for a console, I’m sure you know manual consoles are HARD TO FIND, and I do not want to buy a floor shifter console and hack it all up. I’m definitely going to try to find a similar console to what you have, I much appreciate your video 🎉

19:23 💩💨🤣

Looks good you should put a 2001 front end on it with a extreme body kit would look so good

The front hubs can be changed so regular rotors can be used. I did it on my 97" Accord. You reuse your stock calipers. I used the 4 lug bolt 1998 Acura CL hubs, but that's only because I just bought rims for the car. I really wanted to change all four hubs to 5 lug bolt; more choices when it comes to aftermarket rims.

Interesting video, I have an s10 with some of these things I've been thinking about doing myself, mainly the speakers and considering changing out the mirrors like you did. So this is a helpful video for reference to know what I'll be getting into so I can plan things out before I get everything together and get started. Also I thought that was very interesting how you swapped out the seats, I've never been a huge fan of the split bench seat and what you did has me thinking I have some other options when I want to do that 😂👍

Do I think I fell in love with a man that's just funny humorous and a handyman thank you for all your help period and dedication to your mom to fix it her car. You're a Superman super dad play Andy RUclips Fab

Very Helpful! I heard a loud rattle from blower when ac on 2 days ago that stopped and today smelled what I assume is a dead mouse from ac, with your help I cleaned the blower fan but found no mouse after vacuuming and feeling around. Any other spots I could check!? Thank you Edit: smell started after I removed cabin air filter, realizing now that not having that installed could be causing the smell, also checked engine air filter. Cleaning cabin air filter greatly improved ac strength

I would not have drilled the throttle blades, Now your transition slot is useless , like a vacuum leak. I've seen this done but on some full out twin dominator set-up's. also my timing is locked at 38.

And i am copying ur blazer conversion in the front😊😊😊😊

I am getting ready to lower my 97 with spindles, an i plan on changing out the arms also.

For whatever ungodly reason I can’t get the glove to close

19:23 🤨

…. “My name is dende”

❤ what about the V6 accord 1997 ?

I replace compressor blower motor and had coolant flushed and refilled and I keep having fuses blow plus my ac module is constantly blowing without stopping. I keep seeing vids for resistor but I don’t see mines and my glove compartment looks very similar to that in video 2015 Nissan Altima s

Do you have to do anything with the battery before unplugging the harnesses?

A little low for me sir But I will use 17x8 5star style rim. I like 2in x2in drop

Can’t thank you enough for this video. I have a 1984 300ZX Anniversary Edition with a bad heater core. Thankfully, I purchased the replacement part years ago. But, after seeing your video I realize the monumental task of replacing it. I found a garage that is willing to take it on, but I hope they will take their time, because it appears a lot of things could go wrong in removing the old infrastructure & part. Maybe I should attempt this myself to insure it is handled with care. Unless you would like to do another one? ... lol😆

900 th subscriber!

Did you work it, I'm still working on mind. The motor is 358, top end is great just idle and few pops through carbs. I had to run 18 initial I did drill holes on the plates. Blue springs in the distributor.

Did this a couple of years ago I took a lot of pictures. I would recommend labeling the electrical connectors

Ls swap lil green!

With the VSS, he doesn't mention the most important thing, that is the little square drive pin that can fall out when you're fitting the main unit.

Thumbs up for the great Cornholio looking good sounds like carb thought it was a quadrajet being repaired it was easier for me to just buy a new one then rebuild

What rims use on this s10

What year Chevy Cavalier you got the seats from?, I'm on the market to do exactly what you did with the split bench in my 01 Sonoma.

What year explorer did you get the center console from?

Your scratch the car with that zipper.

Looks like you eat a lot of donuts instead of doing donuts.

Get a Milwaukee you cheapo.

Put your shoes on!