Видео

I wish it was miles:)Thanks for watching!

Very inspiring comment.Thank you!

Owners ( extremely kind and well off people) have bigger issues to worry about than this dirty pool... and obviously they have me to take care of it :) Thanks for watching.

I replaced timing belt and serpentine belt.Belt shown in the video was serpentine belt.Thanks for watching.

Any time boss !

Well...sometimes it is! If your filtration system is relatively close from your pool then most likely yes, it is possible to use just a shop vac.

I don't do this very often but it comes up roughly to $250-$300/linear foot.It is a messy project and the repair kit costs almost $500 ( for 10ft long crack).Thanks for watching!

No silly! Once you remove pool cover all the brass anchors screw down into the ground and they are not sticking out at all.

I am glad you were able to fix your pool pump and save some money in the process.Sorry to confuse you on the impeller removal part:)

I am glad it was helpful and thanks for watching:)

Ironically, I agree with you 100%. I strongly advised the owner of the pool against it and with my 20 years of pool expertise I did not believe that any of those tiny cracks leaked anything but....My customer ( which is actually a very nice guy and perfectionist ) wanted to do it. I haven't heard about any leaks once I finished the project and customer can sleep better at night. Thanks for watching.

Well, you can't fix nasty pool full of germs and bacteria by applying rainbow dust and butterfly juice. Chemicals are necessary to make it swim ready.Thanks for watching:)

This must be the very best comment I have received on any on my videos-period! I am very glad I could help and even with this darn accent of mine you were able to understand most of it:) Thank you for watching and commenting.

Glad you liked it:)

Glad it was helpful!Thanks for watching:)

It can if you don't hold the tool with both hands like a man:)Thanks Steve.

Chillen like a villein, good catch boss :)

Delivering quality work is a must, doing it quickly is optional ! But you've already known that boss:)

I've been watching for years others videos on RUclips on how to fix things ( my cars, home appliances etc) and now it is my time to give back to the community and share my knowledge. I am very happy it worked out for you and you were able to follow my directions.Thanks for watching:)

Thanks 👍

100% agreed. They have huge trucks because they have small bamboos.Did you see my bamboo? Thanks for watching!

Please do! Worth every dollar.Thank you for watching:)

Roughly 50/50 will do the trick.Thanks for watching!

Air compressor delivers very small amount of air (let's call it flow) but at high pressure. What we need to winterize a swimming pool is low pressure ( 5-7 psi max) but lots of flow. Air blower is the most optimal tool for the job. Although, some elements in pool business ( like some floor drains or in floor cleaning system with blow through plugs ) must be winterized with air compressor.Thanks for watching!

It is not the easiest DIY project out there but I am glad you managed to install yours with my help.Thanks for watching!

They have swimming pools in Maine? Just kidding:) I am glad my video was helpful!

Perfect timing! 99% of the time 3hp Cyclone Pro is needed since 5hp shop vac does not have enough oompha oompha to blow out floor drains. Thanks for watching:)

Two domes are just like one but with additional ports to blow out.Once you start blowing first dome, you will realize that they are connected (underground) and your second dome is blowing water out one of the holes. Basically, one of the holes in each dome is the"connecting hole" between the two units. I hope I am explaining this clearly. As far as the valve next to the domes, that needs to stay open during winterization process or you won't be able to blow out the very few floor jets at the very deep-end part of your pool (near floor drain). I hope that helps!Thanks for watching:)

Hopefully one day my videos will be as amazing as yours and I will make everyone happy.Thanks for watching!

Like what? He closed the valve and removed the handle.

Bu, havuz suyunda çok fazla klor olduğu anlamına gelebilir. İzlediğiniz için teşekkür ederiz!

@@VikingAquatics Çok teşekkür ederim cevabınız icin

Her zaman!:)

Hi.Mostly chlorine (shock) ( once your ph is adjusted to 7.2-7.6 level). Nothing else, just chlorine.Thanks for watching.

My man! I need to get a cut from the blower company for creating sells for them 😝Good luck with winterizing and thanks for watching!

Good for you. Good luck with pool closing.

Great thinking, but....workout bar is much thicker.Also, if you were to use your pool pole every single day, speed and convenience is everything. Pool guys would not have time and energy to play with additional clamps. Not to mention, Skim-Lite is stronger and thicker than most pool poles that I have used and I have never bent Skim-Lite out of shape.I have bent almost all other poles that I own. ( fiberglass is the only one that remained straight ).

@VikingAquatics hey man, thanks for replying and explaining the difference. It was just a thought I had.

It was a good one! Thanks for watching.

Best of luck. You can also check my other possibly more detailed POOL CLOSING video "Swimming Pool Closing For Dummies" that I just posted.Thanks for watching!