Видео

Good day to you. I have seen this happen when the cells get out of balance. Is this unit still under warranty? If so DeWALT is very good about replacing these. If it is out of warranty service, I would try cycling it 5 or 10 times to see if you can get the cells back in balance. One or more of the cells may be undercharged, or faulty.

@@1985eldorado Do you have a spark tester? When it stalls I would check for spark first.

@jeffcunha9114 it starts but it stalls again even when I floor it I just replaced the spark plugs and wires

@ Oh man. That sounds like a real challenge! I am still wondering if it is fuel or spark. Do you have any OBDII codes from your Honda that could point us in the right direction?

Hello, I think you should be able to adjust the print head from its parked location. Does your printer not power on at all? What are you trying to accomplish? Thanks

Thank you so much for taking the time to comment. Yes, we normally have our roofs loaded, but this particular home has a driveway that was too wet and steep for the commercial roofing truck! Are you in construction as well? We are happy to have you around these parts!

@jeffcunha9114 No, just a bit of a DIYer. I'll watch professional roofers hustle up the ladder with multiple bundles 😲 I'm far too much of a wuss for that. Last time we redid our roof we actually built a wooden crane with a pulley and attached it to the roof. Someone on the ground would grab the other end of the rope and go for a run 😆

Awesome! We are DIYers ourselves and love to see what ideas people come up with. Do you have a video of your roof loading setup? It sounds fun! 👍

@@TheGrendel1985 Absolutely! Welcome to the community! Hope to see you around again!

I may need a translation on this!

Greetings. I hope you were able to get your DeWALT battery charging again!

I understand where you are coming from. Here is a question, how many home owners can afford me to do a full rebuild? Many times in our business, we are trying to get the most out of every dollar for our clients.

@@jeffcunha9114 if its a foundation issueor flooring issue it still has to be fixedit might be helixcal piles or just grouting the mudsill or replacing rot

That is a good point.

I have seen some run insulation on the buss bars. With the locking cabinet, I don't mind them open. What setup are you running? Thank you for your comments! 👍

@@TheCrazyGolfer Good day to you! Yes, after inserting this battery several times when making this video, it took a charge... And is still working strong with our construction 18v to this day.

Nice to hear.. Maybe i need to keep trying 😁

@@TheCrazyGolfer Yes, I would keep trying. If it won't take a charge, you may have to try jump starting it. If you have a meter, check the state of charge in volts.

Good day to you! Thank you for your message. I was so happy that this worked on our printer too! These are valuable machines!

Good day to you. I would think so, yes.

@jeffcunha9114 Thank you

Absolutely! Let us know your results!

Good day to you. That is the IAT sensor OEM part number 37880-P0A-A02

Good day! Are you working on a Flexvolt battery? We have had some challenges with these and had return one for warranty.

Good day! You would think so, but this stumped me. haha

Oh man, you are correct! I was cleaning the surfaces where the manifold meets the engine. You want those surfaces clean before reinstalling!

We are sorry to hear about this! Did you get it now? It has been a long time since we made this video...

Unfortunately no and I have tried multiple times to get in contact with them but no one is available

I wonder if they are still in business? They transferred us to AirTalk this year.

Good day to you. Thank you for your input on this matter. What oil to use is always such a hot topic. I ran the 15-40 through the hot Northern California summer months where we get 100+ regularly. Now that we are in the winter, I am back to 10-30 Rotella T5 synthetic blend. Can you share the article you were talking about. I certainly do not want to damage this 275,000 mile engine since it has been so good to us!! It did seem happy with the 15-40 over the summer.

@@eyique7921 Thank you for taking the time to comment! I really appreciate it.

@@murphyrock7410 Good day to you. In principle, yes. I wouldn't leave it for more than the five seconds. You can try again after about a ten minute rest.

@@DanielRodriguez-mn8zv As I recall, the unit would try to start up, then stop with the Code 10. What is yours doing?

Oh no! I have never heard of that happening! Your 10 amp was the good battery?

Good day! Thank you for your message. What type and size of batteries are you working with? 👍 300ah 48v?

@@EddieTurner-rk4of I know that feeling well. It is the same one I had when I clicked the battery all the way in! Thank you for your message!

Good day! Make sure the battery is fully seated in the charger. If it still won't charge, it is likely time for a warranty claim.

@ cheers mate I’ve just watched another video where you take it apart it’s worked on one. 🤞

@@camkai1998 Thank you for the update! That is great news!

Good day to you! We installed the brackets on the side of the batteries, because they are not installed for packaging purposes. The bracket mounting screws are pre-installed. Remove the screws from the battery, install the brackets, and reinstall the mounting screws! 👍

Good day to you. I am going to try and clean this thing when we put it back in for the summer. It is in storage at the moment.

Thank you so much for your report! We are very happy to hear that you have a working battery again.

Good day to you. It is wireless to connect to your internet router at 2.4 gHz, but wired for 120v power.

120v power 🤨🤨🤨 okkk well I have 2.4ghz

@@VEGAX000 AlfredCam comes with a typeC white cable and 5V1A adapter, compatible with 110V-240V. 😊

👍🏻👍🏻👍🏻 tyyy

Info helps:Alfred Camera is the easiest-to-install home surveillance system with professional-grade features, period. ANYTIME, ANYWHERE. Unlike traditional CCTV cameras or home surveillance cameras, you can put Alfred wherever you need to strengthen security. Only works 2.4ghz if 4ghz and BATTERY CHARGER WORKS GOOD : 100v /120v/240v (240v make camera work good).

@@VEGAX000 Good day to you. It is wireless to connect to your internet router, but wired for 120v power.

​@@jeffcunha9114 yo I have wifi 2.4ghz I can finally connect! Uhhhh actually if you wonder that I have the same camera like you the Alfred cam plus with 2k view quality but thanks for answering if it's wireless or wired

​@@jeffcunha9114 Uhh anyway do you like to give feed back to me how good was the camera and the app.

@@VEGAX000 Hello again. I We are currently using two of the bigger Alfredcams, two of the smaller ones, and one older iPhone. I think they are great and help us monitor our property without having to worry about batteries to charge.

​@@jeffcunha9114 Thank you so much for asking I appreciated 👍🏻

Thank you for your comment!

Good day to you. Have you been successful using the methods you mentioned?

@ to be honest I’ve reset them using wires but doing the pick trick releasing air is very dangerous as it can go wrong but I’m going off what I’ve seen and hear these tricks defo work it’s just a risk you’ll have to take unfortunately it’s just trapped air inside the cells but I’ve seen them go wrong on RUclips vids so I’m avoiding at moment doing this I’ve got a dewalt battery that needs this doing but it’s such a risk in doing it so I just left it but I do reset them using another battery for around 10/30 seconds and it seems alright doing so but messing with lion batteries is just like lighting a match with petrol lol 😂 so I avoid messing with them sort of batteries NIMH or NICD I do mostly

Nice message. Thank you for the information! 👍

Good info.thnx

Thank you too!

@@rawnlivewithsyregreen9561 Good day to you. Are you getting any codes?

@@jeffcunha9114 no codes

@@jeffcunha9114 no codes just a very low idle like it won’t to cut off

Humm, did this come on suddenly or over time?

I agree that it is the best software I found as a security application in relation to quality and price, its price here in Spain is 33 euros per year in the premium version, perhaps the camera is a bit expensive, and in my case more so, since Alfred does not It ships to the Canary Islands, for which I had to use a special service that makes the product more expensive, but in the end it pays for itself by 33 euros per year

Good day to you! As to your question, the Alfredcam Plus is running basically the same software as your camera. The plus does have some additional features. The most useful additional feature is the eight point detection zone. You can really fine tune the detection zone so that you don't get as many false notifications!

Yes, I will have to agree with you. We purchased four of these cameras now with our own money. We have two of the small versions and two of the bigger, outdoor, versions. To be honest, I think I will be purchasing two more here shortly. I really like seeing what is going on when I am away. I can even check if our dog Kobe is doing well! haha

@@jeffcunha9114 Thanks for the response, very kind. Today I was able to buy two new Plus version cameras directly from Amazon. I have not had to use an additional service to be sent to the Canary Islands. All the best

Good day! You are very welcome. We appreciate your comments and support. Please let us know how it goes with the new cameras from Amazon. I am glad to hear that you don't have to pay for an additional shipping service!

@@chiliewhilie84 Good day to you. Yes, we had one completely dead that we couldn't revive too. Is yours still under DeWalt warranty?

@@duvalreema6744 Awesome! That is great!

Good day! Thank you so much for taking the time to comment! I am very happy to hear that this helped you! 👍

@@rrampage36 Let me check.

The ones they sent us came with 50 inch cables.

@@jeffcunha9114 Thanks 👍

You are welcome. We hope to see you around these parts again soon!

@@SettiCY Thank you for your comment! 😂👍

Thank you for your comment! Haha, we were just having a little fun. Are you working on your Honda?

@@jeffcunha9114 Yes I am sir, after I replaced the valve cover gasket and unclogged my EGR, it’s still showing code P1399 for a random misfire. I even replaced my spark plugs and ignition coils as well. What’s a solution for this?

@@iOSveenate Humm, it sounds like you are on the right path. How many miles on your Honda?

@@jeffcunha9114 Right, my Accord’s year is 2000 with about 197,000 miles

Sorry for the late reply. Were you able to clean the port under the intake manifold AND the port behind sensor? Also, when you clear the codes, does the P1399 come back immediately or after several warm up cycles?

I will try to speak up! Thank you for the tip!!

@@billdickie6151 Thank you very much for your comment! What size battery were you working with? 👍

@@jeffcunha9114 It says Dewalt 20v MAX/LITHIUM ION the low profile type not big and boxy ones if you know what I mean, and thanks again for that tip!

Awesome! Thank you again for your message!

@@briskypt Hey! Thank you so much for taking the time to comment! Is yours a T120 too?

Thank you!! I appreciate you taking the time to comment! 👍

@@danb2160Good day to you! Thank you for your message! That is awesome that you now have six batteries! You will love them. Glad to hear that I could help in some small way!

@@tluva1020 Thank you for the tip!