Видео

Nooooo don't go sanding them. Use the same colour pads as your tuffs, or if you need to go for a clear set of brake pads.

Hello i hope you still comments. My lrd3 woulnd not start and 4x4 screen and sterio would turn off and it would say hdc problem. First i got a new battery but still the same problem

More good information on diy but i like the green back light over the white 😊

Would you tell the name of the white sheet you have used on the walls, please? Does it make the walls damp and moisture proof?

Good video mate. Thanks

I was very sceptical of this one, but worked a treat!!

Excellent! The D2 wipers are pricey here in the US. If its cheaper, ill certainly be doing this to my disco, as the blades are separating from the metal 😅.

Very informative and exactly what i was looking for. Quick question - My blue&me module has stopped working and unfortunately is now draining the battery (my aux connector still works). Out of interest was your aux connection working after you had removed the blue&me module?

Thank you for posting this - it's a great help!

So my air filter has fallen off. I didn’t clamp is down properly it seems. Did you put a bigger clam between the pipe and the air filter??

Thank you. But, why didn' t you put green led ?

Thanks so much, I've been through it with mine and steering and suspension calibration are so important. IID Tool (expensive but will save in long run!)

Brilliant! Tyvm

Good effort. Meyle is good stuff. I did my front ones. After fitting the new links, I greased the exposed thread and slipped a length of rubber hosepipe over it. The idea being the threads should not be rusty next time . . . Hopefully!

Good to see I am not the only person who replaces things in pairs. Lets face it, both sides have done the same mileage and suffered the same abuse. You see so many people only replacing one thing because only one has worn out.

I had an idea of a syringe that you could just screw on to the nozzle when the sealant is still wet and force it out, then you could put the nozzle back on completely empty. I sorta assumed a product like this must already exist though, I know the real solution is just have lots of spare nozzles though.

great vid now i need to see how you fit it back up

Thanks, very useful instruction. If you don't know about hidden bolts and nuts behind foam and flaps it can take ages to do such a job.

Finishing my headlights off now, great video, just one question, i didn’t want to go with HIDs so i got some NightEye LED H1s but they only have one connector on the back and the plug for the dipped beam has 2, cheers

You are a genius. Thank u

Best video I've seen. Good camera and audio. New sub.

Hey bud , having the same issue , would you share the link or cheaper part number to get it ? Thanks for the great video and not letting me rip off the whole plastic parts from the back !!!

greta vid, very clear!

Thank you very much for a helpful video, hardly any full tutorial on this matter. I fixed mine with the Multiecuscan App for iPhone 👍 100% working solution, the only downside costed £60 for a year license when only need it once; On top of the OBDLink MX + OBD2 device (£150] and the yellow cable. Probably works with cheaper OBDLink models but I dunno, I brought one that people seem to confirm it works.

Hi Mate, love the video. HELP re my car is needed. I'm in Perth Australia. I've got a 07 RR Sport. WITH and intermittent fault re the center console stuff and other items. Its doing my head in.............. So, I start the car, the radio works, Sat Nav and AC all work. Indicators all work. Then 3-4 or 10 minutes later, a fault comes up on the dash and the lot shuts down, NO Aircon, No Radio, No SatNav, Indicators stop working and Hazard light start flashing plus the central locking on the doors start opening and closing! Car drives normal. 3-5-10 minutes later it all switch's back on and works again as normal. THEN 5 mins later OFF again. No idea what it is................ HELP pls Thx Mark

What Autel ODB scanner are you using? None of my cheap ones let me know which specific sensor is dead.

Where is the link to the original source of the files??

It’s a nice job in the Sumer / just clean the frames / masking tape can of primer and a can of the finished colour - £20-30 a window Costs/ it’s just labour intensive / the only real work is putting the masking tape on / you couid do a standard size house for £500 max in 2-4 days at your own leisure 👍

The seal has to go on dry right? no oil or lube?

Are the bolts 3/8-24 by 1in? I read 1.25 online but in real life if you use that length you can't put the round end of the wrench only the open end as it becomes to close to the front diff housing

Yoj got anything on how to do a hard reset of the ecu?

Thanks bro saved me a trip to the locksmith

I am able to take care of the tapered dispensing end, my problem is the plunger end of the tube. Any know how to loosen the plunger end of the tube? Pressing the trigger of the caulking gun does not work. Happened to 4 different tubes of 1st quality GE silicone caulking tubes, only half used. Anyone have a suggestion? Thanks in advance. Jim

Excellent video thanks simple but thorough

How much and were did you ger the arms from, the price for the arms vary so much!

Are you able to open the other window of the tent? Ive fitted my awning too close so i cant get rhe poles in😅

Hi friend, removing the batery (old one) and repleace it with a high amp one will also make te Odometer flash? blue&me isue? I have that isue on a 159 that i whant to buy....& The saler said that is from when he change the battery! None before that!? Tnx

My rear parking sensors show on the dash, distance control, however there is no sound at all i even took it bumper to bumper with my mrs car. Is this a fault or a setting? The fronts love going off all the time, so they work fine.

Hello good morning, i would like to mount that steering wheel but with automátic paddle shifters on my D3. It would work for me with those new modules and where i can buy them. I look forward to a response thank you.

Awesome. Thank you

Hola buenas noches quisiera montar ese volante pero con levas de cambio automático, me funcionaria con esos módulos nuevos? Donde los puedes comprar?

The cheapest option is check your water level and don't be lasy

Great tip thanks 😊

Hi mate, how is it working after 3 years? Do you still has this Disco with lamps? Regards Krystian

Bonjour merci pour votre réponse ,vous ne m avez pas répondu ….une batterie AGM ….dure plus longtemps….ou vous êtes avec un ctek branché sur secteur !

Hi what reg is your Maserati?

Merci pour le tuto ,en se me qui concerne j ai un grancabrio ,j ai option parking sensor avant ( un ne fonctionne pas) je verrai avec un autel 200 , par contre aucun de fonctionne Arrière un avis ? Sinon j ai observé une batterie AGM est ce que cela règle le problème de perte Electrique ,? Je perd environ 2 % par jour. Voiture fermée ou pas .merci pour votre retour