- Видео 83
- Просмотров 152 108
After Earth Arcade
США
Добавлен 7 авг 2020
I'm a programmer by trade with a passion for mechanics, electronics, and learning. I feel like learning can be more practical and hands-on. I'm a bit odd and tend to take a game-centric or iterative approach, I'm constantly trying to tie my different skill acquisitions to my future ambitions. I aim to inspire others to make things and unlock their inner autodidact!
Adding VR conditioner to UA4C SPEEDUINO (open source ecu)
ruclips.net/video/jVK2ydTD26E/видео.html
In this video we add a Mini MAX A2 Signal Conditioner (VR) from wtmtronics to our UA4C speeduino. We set our trigger settings in tuner studio and test the RPM1 input with a distributor!
In this video we add a Mini MAX A2 Signal Conditioner (VR) from wtmtronics to our UA4C speeduino. We set our trigger settings in tuner studio and test the RPM1 input with a distributor!
Просмотров: 856
Видео
SEND HELP! Is this 4A-GE Toast?
Просмотров 1234 месяца назад
ruclips.net/video/5rz2sJI-PMI/видео.html After removing the suspension BK discovers a slight twist in the plans :p . In the mean time while he is waiting for parts to arrive. With high hopes comes low despairs, but BK wants this MR2 to run for a little bit before it goes under the knife... Ummm don't tell him I told you that. Even if the valves can be fixed it will likely need a rebuild anyway?...
Combining Arduino with UA4C SPEEDUINO (open source ecu)
Просмотров 2,1 тыс.4 месяца назад
ruclips.net/video/ltCTonyLPtU/видео.html In this video, we'll show you how to combine your Arduino with the Speeduino UA4C and test its functionality. Learn how to connect a potentiometer to the TPS signal and get accurate readings. Make sure to watch the entire series, subscribe for more DIY tech guides, and leave your questions in the comments!
Toyota Yaris (CV Axle) Replacement | DIY Guide
Просмотров 1,5 тыс.4 месяца назад
ruclips.net/p/PLJPB1IuWPuic-U9tVvU8fI0tR-HJLx7zb Join us in this step-by-step DIY car repair video as we tackle the task of replacing a CV axle on a Toyota. Follow along as we navigate through the challenges of disassembly, tool selection, and proper techniques. Learn from our mistakes and triumphs as we share valuable tips and tricks for a successful repair. Don't forget to subscribe for more ...
I Learned To Remove Rusty 30 year old TOYOTA (Front Suspension) | AW11 MR2
Просмотров 2294 месяца назад
ruclips.net/video/5rz2sJI-PMI/видео.html After compression testing our 4A-GE, we noticed some smoke and burning on the spark plugs... Could something be wrong with the valves? Could stuck valves lead to the uneven compression we seen? BK deiced it would be a good idea to take a break for the engine. He plans to arm him self with more knowledge before diving into the MR2s motor. We all know the ...
Toyota Yaris Brake Rotor Replacement | DIY Guide
Просмотров 7094 месяца назад
ruclips.net/p/PLJPB1IuWPuic-U9tVvU8fI0tR-HJLx7zb Join us in this DIY guide as we tackle the task of replacing the brake rotors on our Toyota Yaris. After experiencing rubbing on the right side following a tire blowout, we dive into inspecting and replacing the worn rotors. Follow along as we demonstrate step-by-step instructions and share valuable tips for a successful repair. Don't forget to h...
A Quirky Approach to Handling a Flat Tire on the Highway🚗🔧
Просмотров 875 месяцев назад
Que the battle music doods. Its time for a RANDOM ENCOUNTER! This time BK was coming back from a late night delivery session at the base of loan mt, When suddenly an loud pop from DD's rear passenger tire! *GASP* Will BK manage to get DD home safe!? Is this the end of our adorable little Delivery Driver? (Toyota Yaris) FIND OUT! ruclips.net/p/PLJPB1IuWPuicyIKO9Q4iiY463p5ai2P8D
What to BUY when setting up a SPEEDUINO (open source ecu)
Просмотров 8 тыс.5 месяцев назад
ruclips.net/video/7M12F9-XDjw/видео.html Take control of your engine! Sick of after market ECUs costing a fortune? Wanna get your hands dirty and learn some stuffs? Some other random question that will get you drooling......? Then you come to the right spot. We will walk you through the different parts you will need, and where i got mine!
Will this 37 Year OLD AW11 (Toyota MR2) Have good Compression?
Просмотров 1985 месяцев назад
ruclips.net/video/lTgno_7VXGA/видео.html After enjoying a nice day with the MR2. Learning about diagnostics pins and wondering why smoke is coming out the pipe.... ROFL BK is ready to get these compressions numbers.... Hope it all works out. Those AW11s have tough motors after all.. How will this little 4A-GE stack up! THEY SOUND SO COOL... FIND OUT 峠
How To Procrastinate On A Project Car
Просмотров 5155 месяцев назад
ruclips.net/video/Vlt40-bZf_E/видео.html After playing around and wasting too much time. "Exploring the dungeon" BK decides its time to take some actions that will lead him closer to realizing his vision for ZZ! What is to become of this rust old Nissan 300zx Z31? What does BK plan to do this this thing... I thought he was trying to "get to the track"? FIND OUT! ProjectZZ
Will this 80's classic "MID SHIP" RUN? After sitting for 30 YEARS? AW11 (Toyota MR2)
Просмотров 1165 месяцев назад
ruclips.net/video/yIivA_A4A0Q/видео.html After replacing the old crusty oil... lets be real it didn't look to promising :p Its time to see how this little 4A-GE is doing, Iron Block right... what could go wrong. its not like Aluminum heads can warp haha... .. . Can BK mange to get this AW11 running good enough to daily? Or is it the BIN for this one... FIND OUT 峠
How to change oil AW11 (Toyota MR2). Easy Oil Filter Location.
Просмотров 1805 месяцев назад
ruclips.net/video/yIivA_A4A0Q/видео.html After raveling the plan for our ANALOG DREAM! our future daily, and canyon sword! :p This AW11 is just full of surprises! Before we can we try to run it for any significant time we should change the oil. BK will show off 2 quick and easy ways to find the oil filter on a 4A-GE. Will we be replacing this engine or rebuilding it! FIND OUT 峠
Project Car Tips: What to Do When You Get a Project Car
Просмотров 2996 месяцев назад
In this video BK rambles on about how plans are important. What will happen to ZZ? Is this the end of our believed Z31? Hot trash . Fresh off the TY ruclips.net/p/PLJPB1IuWPuidKySSg5s1cXPw-MF4kYdrr
I Adopted an AW11 (Toyota MR2) it's MISSING KEY parts
Просмотров 2566 месяцев назад
I Adopted an AW11 (Toyota MR2) it's MISSING KEY parts
I Tried To Adopt A Toyota MR2 From The Scammiest Seller On Marketplace (AW11)
Просмотров 1,7 тыс.6 месяцев назад
I Tried To Adopt A Toyota MR2 From The Scammiest Seller On Marketplace (AW11)
Testing Different Gas Stations (But All At ONCE)!
Просмотров 2056 месяцев назад
Testing Different Gas Stations (But All At ONCE)!
I Fixed My Yaris Door For $15 Using Junkyard Parts
Просмотров 976 месяцев назад
I Fixed My Yaris Door For $15 Using Junkyard Parts
How to Remove Door Card on 2007 Toyota Yaris | DIY Car Maintenance Tutorial
Просмотров 4506 месяцев назад
How to Remove Door Card on 2007 Toyota Yaris | DIY Car Maintenance Tutorial
Scouting for a Car Door Replacement: Junkyard Adventure & DIY Door Fix | Toyota Yaris Vlog
Просмотров 3316 месяцев назад
Scouting for a Car Door Replacement: Junkyard Adventure & DIY Door Fix | Toyota Yaris Vlog
Speeduino 101: (Arduino Setup and Firmware) | Introduction - Getting Started with Tunerstudio
Просмотров 3,9 тыс.7 месяцев назад
Speeduino 101: (Arduino Setup and Firmware) | Introduction - Getting Started with Tunerstudio
DIY Ford Edge Starter Replacement - How to Fix Yourself and Save Money (2008 Model)
Просмотров 1,8 тыс.7 месяцев назад
DIY Ford Edge Starter Replacement - How to Fix Yourself and Save Money (2008 Model)
How to Replace Your Hatchback Gas Shocks
Просмотров 1377 месяцев назад
How to Replace Your Hatchback Gas Shocks
Exploring the Junkyard: Finding Hidden Treasures, Gas Shocks, and a Surprising 1969 Opel GT!
Просмотров 1,1 тыс.7 месяцев назад
Exploring the Junkyard: Finding Hidden Treasures, Gas Shocks, and a Surprising 1969 Opel GT!
How to Replace an Accessory Belt on a 2007 Toyota Yaris | Essential Car Maintenance Guide
Просмотров 5297 месяцев назад
How to Replace an Accessory Belt on a 2007 Toyota Yaris | Essential Car Maintenance Guide
NO BACK REST BACK SEAT - The Ultimate Road Trip Upgrade
Просмотров 687 месяцев назад
NO BACK REST BACK SEAT - The Ultimate Road Trip Upgrade
How to use dry ice to remove sound deadening | 1985 Nissan 300zx Turbo
Просмотров 748 месяцев назад
How to use dry ice to remove sound deadening | 1985 Nissan 300zx Turbo
How to Replace the Starter on a 2016 Toyota Camry
Просмотров 6328 месяцев назад
How to Replace the Starter on a 2016 Toyota Camry
Trying to remove sound deadening with a Heat Gun... Is there a better way? | Nissan 300zx Z31
Просмотров 1488 месяцев назад
Trying to remove sound deadening with a Heat Gun... Is there a better way? | Nissan 300zx Z31
The shop is trying to charge me $485 to do this??? That’s wild
Its less then 1 hour job for the shop... $200 per hour QQ crazy. I'm sure you know this but its good to check the battery before you replace the starter. Junk yards will sell very cheep tested battery if you are in need of something inexpensive.
Maybe you know but is there. Speeduino build to do 5 sequential cylinders? I think the drop bear goes up to 12. Is there like a diy viersion of the drop bear or similar?
Thanks for the comments! :D This U4C has 4 channels and can do up to 8. You pair 1 channel to 2 cylinders. dropbear from my understanding has 8 so you should be able to do a v12 with a drop, but v04 boards like the one the u4 is based on have 4 channels. more info in link wiki.speeduino.com/en/boards/Dropbear
What is your wrench extender called and please provide link to purchase?
Hey! i get most my stuff from harbor freight. They are affordable and worked out for me. The extension is the first link and the red breaker bar "extension " is the handle from the jack in the second link. www.harborfreight.com/wobble-socket-extension-set-9-piece-67971.html www.harborfreight.com/automotive/jacks-jack-stands/3-ton-floor-jack-with-rapid-pump-red-56624.html
I have a 2007 Yaris sedan I just replaced both sides of mines , but my driver side is now leaking from that metal line that runs directly into the cylinder, not sure what’s the lines called
The break like goes into the wheel cylinder. Sometimes if the line is old or you over tighten it can leak. check to makes sure you have a snug connection after its bolted to the drum back plate. Post a video if you want ill try to help.
Very cool, I'd like to do this with my s13 sr20❤
is it a 180sx? love the hatch s chassis! You got this dood :D
Looking forward to the wiring video!
Hell ya!!! I'm still working on it. This summer has been brutal, but its more that I got pulled away from this project due to work, and some other personal things, but it should be out before the end of the year. Shooting for sooner rather then later...
Dude this guide is kickass!
how good is this opensource ecu, can it run say a honda k24 in a bmw canbus? love the eurobeat!
Well I can't say how good it is vs other ecus, but you will have options on how you want to run the K24. Depending on how you want to set up the spark and what kind of injectors you are running. This U4AC has 4 channels for spark so you can run each cylinder, but for 6+ you need to set up the spark in pairs. wiki.speeduino.com/en/wiring/Injector_wiring. The big thing here imo is you can us MAP to get your fuel tables and thus adjust for boost levels. A speeduino does the same thing as a megasqurit or something but for less. As for the BMW canbus thing. I'm not exactly sure. From my understanding canbus is a protocol bmw seams to have some of its own other protocols too. medium.com/@chairface/talking-to-your-bmw-tapping-into-a-cars-communication-bus-4adff7ac640d It doesnt seam like the canbus is fully implemented for broadcasting functions for the speeduino yet. So ide image you would need to do some custom things if you are trying to control things over can with this ecu, or if i was you i would join the forums and ask there.
@@aftereartharcade that wiki link was helpful, it looks like speeduino can work with the analog bmw's before 1999 when they went to canbus system. Thanks bud!
I saw Speeduino supports CanBus, and I would like having the option of reading RPM and oil and coolant temp over OBD2. Do you know something about that?
wiki.speeduino.com/en/CanBus_Support2 Yes it looks like you can.
Nice
thank youu
Wooooot!!
Excellent
I was really close to buying a speeduino but I actually found a guy talking about rusefi and ended up buying a uaEFI board. I wish I could have gotten a dropbear to try out as well.
Not sure if you fixed but in my experience, that smoking off the exhaust manifold was caused by a leaky distributor seal. You might have to rebuild the distributor. It's not too bad of a process.
Awesome! Ill for sure look at that! Its been difficult to find where that leak is coming from. From what Ive been reading it could also have a leak in the valve train too like the stem seals. Thanks for the comment :D
You'd be better off with cubes of dry ice instead of one big chunk. But what do I know, the cubes didn't work for me either lol
I did end up breaking the dry ice up when i tried to use in the car. It worked, but it cost a bit and is hard to work with, but its satisfying when you do get pieces off with it.
Thanks for the speeduino series! Please keep it going! This is the format I need.... breaking it into chunks.
You got it Fred! Thank you for the encouragement! I've been dealing with some personal issues, but we are working on the next few videos still :D
That squirt tho ;)
Just got an AW11 two days ago! Looking to run all the basic maintenances on it to get it to a good baseline. This was helpful and shockingly recent. Thanks!
Sick, Good luck with yours! AW11s are sweet, glad I could help out!
Yooooo i got mine 3 days agoo
@@aftereartharcade thanks!! glad there's recent stuff on the aw11, imma edit when i finish the oil change
What are the odds that I adapt the speeduino to a school bus diesel
I think kind low due to how the diesel engine works. They don't fire injectors or spark the same way. but if you understand how DE work you can probable adapt the code to do it, as it is open source.
speeduino.com/forum/viewtopic.php?t=657
@@aftereartharcade super helpful! Thanks man!
Keep going!! Im damn near learning step by step through you
Hell ya that is awesome! I appreciate it :D I'm working on the next video in this series, but some life issues have gotten in the way.
For everyone planning to watch, it has loud ass random music. If you have it muted, it’s a helpful video
Thanks for the feedback! Kinda reflects my personality people say I'm more helpful when muted tooo... >< Anyways I'm still learning all the yt stuff so i appreciate you telling me the music is to loud.
Dude would you ever get in a discord call and help me get this setup ? I can burn the base tune for some reason . I will literally PayPal you !
Yeah we can work something out! I'm still learning myself lol but maybe together we can figure it out! Im wtmk_bk#8448 still working on the After Earth Arcade discord but feel free to message me. Tuesdays would be the best time for me.
@@aftereartharcade sweet man I added you . Much thanks 🙏
Your „Distributor“ sends out a hall signal, you dont need a vr conditioner. Set jumpers to direct and pull up
Hey! Thanks for reaching out and letting me know. I tested with a multi meter and I'm getting some ac voltage when connecting to the 120 degree signal and the negative then rotating. Also it produces a RPM reading in tuner studio. If I remove the VR conditioner then jump direct and pull up as you say I no longer get an RPM reading in tuner studio when rotating. The meter test suggests its a VR and it does work seam to work in the VR configuration and described. I don't doubt that it maybe a hall signal, but why then I'm not getting a RPM reading when setting it up as you specified? What are some other things I can check to verify?
@@aftereartharcadethe ac detected could possibly be interference? Is your sensor wire shielded?
@@lundyracing I think you are right that it is interference. i realized that this is an optical sensor... so it really should be hall... that is why lobotomyy was trying to say.
More videos with Speeduino on RUclips. Very nice :P
Are you willing to build a speeduino board for me ? Obviously would pay for raw material and labor !
I'm hopeful if you follow the videos you should be able to put one together yourself. I plan to show the full process of hooking it up to our z31. Even if it blows up :p . Sending out assembled speeduinos is a service i could provide, but to hook it up the the car you would need to do your own wiring or we would have to put a harness together for you. That could be expansive :< but what engine are you running?
Ka24de ! And I bought the exact parts as you . Having issues with tuner studio.
@@thomasjoyce8374 Oh sick! Did you install the firmware with speedy loader? If so what issue do you have with tuner studio? Do you know what injector and ignition set up you are running?
@@aftereartharcade I followed the video step by step (amazing video btw) I wrote down the error code it was throwing , something with the imi I think. And I downloaded the most current version with speedy loader . I'll add you on discord sometime soon
Nice vids! FYI the Arduinos on the WTMtronics site have the Atmel based 16u2 serial chip. The pic is old, you can't even buy those particular units from robotdyn anymore, and it was not a CH340, but another vendor's IC.
Thanks for the info! :D The one i bought from WTMtronics was a CH340 but that was late last year.
My AW11 is currently sitting, but it's the project I want to work on most. Going to be SR20 swapped, turbocharged, and mostly stock appearance outside. Lots of 3D printing will be involved too.
Hell ya! That thing is going to sound sick!!! What transmission are you using? AW11s are so coool
@@aftereartharcade LSD 5 speed from a Sentra. :) I've figured out how to adapt the axles/hubs with off the shelf components, I believe. Still need to actually mount everything and all. Just have other projects to finish first. Down the road I may try to import an X-Trail VET engine, but that's way in the future.
I think we are the same brand of ADHD hahaha.
Glad to find someone who can relate :p
I named mine Yesenia or Yesi the Yaris
I like that name very cute :D Fitting of this car. Idk people like to talk smack about the Yaris, but its a very dependable car and i think the hatch looks cool. (The sedan is cool too lol) Ours is DD or delivery driver :p . But im thinking about changing the name to Yaurirtle and seeing if we can make it look like a Squirtle lol
How many miles on yours? I just bought an 07 sedan with 217k and she's running like a champ
We are at 201k right now! Hell ya the 1nz is really good. If its not burning oil it was taken good care of. I use Chemtool b12 every other oil change.
Your production value is always rising bro. Love seeing your progress. Hope you get coilovers! Though for an 80s car, i imagine itd be pretty hard to find an economical option for daily driving purposes.
Appreciate you Neet! Im trying to level up!! Megan has the most economical, but lots of good reviews on the BC and they are just a bit more. I decided to go with KYC struts they are $60 and OEM like. Getting the car back on the road is my first goal. Ill probably upgrade to the ground control lowering spring kit in the future.
Expansive ? I think you mean expensive
That is the one! --$ :D
Bruh, WD-40 is a lubricant, a big NO in breaks world. You need a break cleaner and only break cleaner to remove the grease and oils which come from factory to protect rusting of the discs (rotors) on the shelf. Also, you need to address that torn rubber asap, as soon as you get dirt and water in those joints, they will behave like sanding paper inside of them, completely destroying those CV joints.
Thanks for the information! That is kind of why i did it to see if others thought it was bad idea. We use to use wd-40 for everything, but you are correct. DON'T USE wd-40 live an learn (i did say don't quote me rofl). I was out of break cleaner. Ill go get some and and use break cleaner. I ordered a new axle and it'll be in before I drive it anywhere.
wd40.com.au/uses/whats-the-best-way-to-clean-brake-rotors#:~:text=Can%20You%20Use%20WD%2D40,No. Also the web sight says you can so idk, but ill use break cleaner anyway
🍋 +❤🔥 =🍻🥳
you should have called me. I would've come to help ya. Glad you're okay though.
Haha thanks Koopa! I'm glad i have friends like you :D I think i enjoy the chaos. If it got to unmanageable i would have.
Long live Eurobeat :D
at least you get it! 👊😁 and the music you use is always so good! just say'n lol
@@aftereartharcade 😊🙇♀️ thanks alot.
Now i need a car to play with :D
does it fit my honda
Yes! The U4 can run up to 8 cylinders. They also make a plug and play called a dropbear. speeduino.com/shop/home/38-speeduino-dropbear.html
I wanted to watch and learn from this but the disco and glitching was too much to bear. Sorry.
Thanks for the feedback. I love euro beat so it was surprising to me so many people didn't like the music. I get it though to each there own. Being fun and informative is my goal so im sad my style prevented you from learning. To break it down in text. I got my components from wtmtronics. You will need a speeduino, and Arduino with a 16u interface, a if you dont get a U4C speeduino you need a stepper driver for the tps, and if you dont have HAL crank and cam signals youll have VR ones so you need a 2 channel VR conditioner. speeduino.com/home/ wtmtronics.com/ This is the relivent info in the vidoe.
I like your videos vibes
Thank you!! Appreciate the support 👊
I have to say, interrupting yourself with music to freeze frame and circle something is really funny. Please keep doing it!
Bro, i was so put off by this that i was like wtf is an ecu¿ I’m a whole mechanic. U just don’t expect an arduino to be an ecu. What even funny is I thought about doing this once and still didn’t make the connection. Very cool
Microsquirt’s been doing it this way for years.
that music was horrible and speed thru the end. I would have like to see a walk through of the board and items not just an unbox and "here it is" video. would have like to see it put together, and running an engine and how to set it up.
Thanks for your feedback. I'm creating this series to do just that. This was the second video of what parts you will need, and the parts i got to give people and understanding of what they will need to get started. In the next video we will assemble the ECU. The goal will be to go over each component, and how to wire it. We will be running a v6 vg30det, from a Z31. This is a long form project and doing it in small chuks makes it more manageable for me. I understand that waiting and short, component baised maybe not what you are looking for, but once the series is completed I feel it will be easier to watch in chucks and people can skip to the part of the process they want to see. My biggest goal here is to just get the word out more about the Speeduino. Again your feedback is much appreciated. Maybe my future videos will be more what you are after.
Here are the Hardware Requirements. It details the 16u2 and the VR crank/cam wiki.speeduino.com/en/Hardware_requirements
Updated manual says both are fine btw, but the requirements still say as of this its better to us 16u2. just FYI speeduino.com/Speeduino_manual.pdf