Видео

I want to give you a hige thanks for this video. Im not a computer geek whatsoever, and with your help, i was able to connect to my sons e46. Now, i need to learn how to use inpa. I have an e92 m3, so i know this covers it, but what program do i need for our f15 x5? I'm so thankful that I decided to subscribe to your channel

With so many comments on this video I am certain that this has been addressed but I'll say this anyway, the oil you're using is not the oil you should be using. Your car specifies BMW LL-01 specification and while Castrol does sell oils that meet this specification, the Edge 5W-30 'us' that you're using is not one of them. You should look for the Castrol Edge products that state that they're A3/B4 rated and not 'us' after the viscosity grade. To be specific - Castrol Edge Euro Car 5W-30 A3/B4. It's sold at Walmart. The differences between the "us" and "A3/B4" are staggering.

Watch Part 2 here: ruclips.net/video/yn7g0pv2bYk/видео.html

Awesome. I gunna do this too. Thx.

Thanks, helped me work out why I couldn't get the door release to fit properly!

I'm going to replace mine every 3000 miles or every 3 years

SOS 😂 can’t get the dang bottom wire off

Man, a huge thank you from Strasbourg, France. You helped me so much ❤

I change my Mobil 1 0W20 every morning before breakfast - should I also change my filter on a daily basis ?

Is there a mount i can use for my scooter? I finally took off the solid top just to find no hole. Its like a VERY tiny spot for a screw im pissed asf.

what genius idea to mount the alternator in such a way that it serves as a belt tensioner. Good vid. Im getting one of these bugs.

in the video you said it was only overheating w the a/c on , did you replace or test any other thing prior to replacement. going through the same issue at the moment

Oil is cheap engines are expensive’

When i open inpa, it only says info and script. No models like this

I have bmw1M my right rear break is fine when i leave home but as soon as i break it starts to grab if i stop for long enough its seems to free itself would this be a similar problem to yours. thanks michael

Sir, plz check your email

Great video. Thanks for sharing

Came for the motorcycle information, but was pleasantly surprised to see Evergreen at the end!

So you have to buy a case as well?

Reduce coolant temperature and forget for expansion tank replaceing :) !

C & S Corvettes has/sells the right set WITH the adapter....the WHOLE kit is only TWO components....The adapter and the mast....mine cost $75.00 - delivered! ....This kit is for the CONVERTIBLE ONLY!!....Jim.

With regard to NCS Expert/INPA, this is without a doubt the best instructional video and software download on RUclips. I have tried several and never found as complete, smooth and flawless install. Thank you for and excellent video.....

Might be a bit late to the party, but I hope this comment helps some people. Customers of mine have their alternators replaced/upgraded frequently, if the bottom piece connecting with a bolt has a bigger gap than the alternator that was pre-installed in the car, you can use washers to the size of the bolt, and fill in that gap, works wonders and is very secure so long as you tighten properly.

Haha

Thank you very much! Great vid!

Change your oil when you want! 1000, 2000,3000,4000,5000,miles! Or never! You can be as smart or stupid as you want!

What if it has smart key??? Same procedure?

Swingarm service video here: ruclips.net/video/0E8Urk-TQ7E/видео.htmlsi=Kj9VEYlC_JvOk-O8

Those washers you questioned were for an aftermarket front bumper cover (aka bra), they are not stock.

If the vehicle is seldom used, is the interval for mineral oil 6 months

1. Thank you and I appreciate your sharing your experience. 2. My driving is probably less than 300 miles a month in retirement except for the visit to a relative about every 4 months. I drive a 2004 Toyota. No oil leaks. Type of driving? To the liquor store or super market. 3. The family has had 3 other units of the same generation of Toyota and each of them lasted more than 250,000 miles because they weren't doing the 10,000 mile oil changes and were not using synthetics. 4. The sales tax/increased registration fees, the additional types of insurance required on a newly acquired and financed car should enter into the consideration of the frequency of the oil changes. If a person goes from long commutes to short hops all of a sudden, the oil analysis done last year or two years ago will, of course, become questionable as a future guide. Just for kicks, I looked up the cost in 2015 of replacing valve seals on a Yaris. Yikes! It would be time to send it to the junk yard. With 300,000 miles and the cost of repairs, what would I do? Exactly what I did years ago in Palm Springs, Ca in the summer when the car gave up the ghost. Caught a ride back to Los Angeles. Donated the car to charity and met the charity tow service the next weekend. I drove my back up car. Make sure you either have a backup car or AAA extended towing.

What maintenance stand do you use?

Good job dismounting But having the swing arm out I would remove rust and paint it Also the bolts need a good clean up w iron brush before greasing

Some guys on youtube said cams and intake make 10 more horsepower

One thing I'll say is I would have changed the oil filter anyway. I see no reason not to. It's cheap, it gives me peace of mind, and I don't run the risk of leaving it in for 45000km if I mistakenly think I changed it last time and I didn't. For me changing it every time is the way.

No mention of the oil degrading from 6 months onwards. This video is on good for those that do high mileage within the 6 or so month timeframe.

man, if replacing the valve seals is somthing you can do then do it, i say you even make a video out of it.

that stupid gas spout is because of U.S regulations they pretty much have to have it. On my rotopax i've added a leak proof vent cap and aftermarket spout.

Lovely illustrations

Why my computer says in program compatibility setting that settings applied: for windows xp? Even my laptop has win7! It won't let me continue further 😢 It gives error 5: access is denied. Setup was unable to create the directory "C:\ediabas\api\exel"

Do any viewers know of an oil analysis lab in Australia that would provide this service? Thanks.

You have a garage but don't keep your car inside? Why TF not?

Does anyone happen to know the size of the drain plug for the xt250? Thank you!

Awesome. Simple and easy to understand. Thanks

Thanks

do you fill it until it begins to leak out of the fill hole?

lol who replaces those bolts on that brace

I got a lifted truck , I don’t need a floor jack 😊

How about splitting open the oil filter and spread out in a shallow black pan. Soak with a bit of thinner and then take out to air dry it. Then look for shinny metal debris. Any plan to switch to Vavoline Restore & Protect?. Regards.

My wife read your channel name, burst out laughing, and left the room. Excellent choice.