Видео

May need to loosen rear brake. It happened to me. Wheel would not release.

Tony, some recommend not to use lubricant on the rollers, but Honda does. What do you think of dry film graphite lubricant instead? I think it may be less sticky and resist dirt particles better.

Thank you Tony. HH

Hi tony i installed the oil seal backwards.. with the spring facing towards the water.. can i leave it as is??

Thanks Tony

Touring on the Helix ? What's in your tool kit

I am getting ready to change out my belt. 11k on a 1999 Helix. I appreciate your videos. Know I am looking for the variator video. : )

I pushed tge piston in but now after installing the brajes, I'm not getting any movement when i press the brake

Its probably a bit late now but the trick I saw other youtubers do with the tracks is to use bits of car wiper blades where you used the wire. Every third section of track actually doesnt look bad either and they look more accurate also. They allow you more grip by having bigger spaces between them to get bigger bites of dirt to push on. I just did it to mine and added some weight as well. Hoping to get a chance tomorrow to test it out but it definitely pushed a few items across some carpet here a lot better than it did stock.

Tony, thanks for all of your great videos. The rear brake adjustment was very helpful. I think that nut size is 8 at the end of video.

Suele quedar el tornillo de la admisión chocando el acelerador

Sick place men i have these 4 as well cool machines if you mod them

My front brake feels hard. I changed brake fluid. I used what was recommended. It’s still feels hard. Looks like new brake pad. The old fluid was nasty. I’ll try a new master cylinder in the spring

Let wife ride in the front. Be cool to following another Helix

id drop my scooter off if you were closer have you go threw it lol enjoy watching your videos ,,, the rc ones are cool too but the helix videos brought me here

Perfect

My son has a 98 Honda Helix and I changed the electric choke and after running for awhile it has problems starting....any suggestions?

Your helix sounding good for its miles good job!!! It sounds like mines which has 9,000

Just finished installing the new instrument blubs you recommended. Huge difference. Thanks Pal.

私はあなたの動画で学んでいます。ありがとうございます

I read somewhere that using a clamp or wedge to keep the clutch fully compressed will allow you to change belts without the need for removing the variator. Have you ever tried that Tony? Also, were you successful in shooting down all those pterodactyls?

Boys and their toys, lol. Actually, thinking of getting an RC front end loader so I can sit inside the house while clearing snow from the driveway in the winter. 😆

Pretty great that you DON'T HAVE TO TAKE THE WHEEL AND FRAGILE LIVER-SHAPED EXHAUST OFF. Guess what I own? Lol.

When I had to drop the engine, I had removed the entire rear frame sub assembly - after the upper and lower side panels were removed, unclip the rear brake light connecter (left side, by the passenger foot peg), then two upper bolts under the seat and a bolt on each side. Made working back there wayyyy easier. Highly recommend!

I own a Yamaha motorcycle with a speed of 140 km, but the maximum speed I can reach is 95 km. I replaced the CVT group, but the speed is still limited. Could the reason be the roller? Could you please explain?

My carb giving me problems this days, what do you suggest friend?

Thanks brother, you are looking good.

Oil may be the cause of damage to the rubber pads

Gracias muchas gracias por el vídeo

Great video. I think you found the squeek when you mentioned the shiny areas.

My coolant jug is cool but my engine showing hot so I think it's my thermostat

Where did you get the thermostat from

Hey Tony, you've already helped with a lot on my own Helix, just wanted to know what pod filter you got, and if it's the reusable kind. Buying the 120 and 40 jets and attempting this soon!

Thanks for this video Tony. I wish I found it 2 years ago.

Good stuff. I have a piaggio hexagon and I think there same engine.

This looks so fun! Need to do a group ride sometime!

Looks like a nice bicycle lane along side of it. Can electric bikes be used?

thanks man! I couldn't put my rear wheel back after changing brakes. This fixed the problem 😊

I can t put it back on! I think the new breaks are not letting the tire sit properly...

Thank you for helix videos

Thanks for all yu do for us Tony

Hi Tony, I saw your video, and like you I like to get my hands dirty ... I would like to restore my 1997 Honda CN 250. I am currently having problems with the brake caliper that remains stuck on the brake disc. I have already overhauled the brake pump and the brake caliper. I have a suspicion about the LINK, TORQUE and BRACKET COMP., L.F. bushings in the manual, however, I cannot find any indications on the permitted movements ... do you know if these must remain stationary or can they oscillate laterally?? Congratulations for your desire to share

I bought a used Helix last year and have been riding it ever since. I was able to learn about maintenance from your channel. It's very helpful. And watching this video makes me want to go on a tour. I'm always looking forward to your updates. Thank you.

Felicidades

Where can I find a carburetor for a Honda reflex boss ?

Thank you Tony! You're videos help a lot.

Hello, I need some help. I had removed the crankcase cover and put a new rubber gasket on. when i went to reinstall I noticed i still had a small gap along the left bottom side. its like a quarter inch off.. its so strange because theres nothing in the way and everything is clear. Is that supposed to be like that?

Hi Tony ı am from Turkey.I have a Honda Helix cn250 1996.Do you have a Instagram or Facebook. Because ı need to ask something about fix my Helix thank you.

Good morning Tony! My caliper pistons wont retract.. I've pulled it apart, cleaned it, put new pads on it and it they're still sticking. What should i do!!

Great helpful tip! Thank You!