Видео

Its so embarrassing looking back at me 4 years ago jumping in their😭

I really like what you have done, but I am going to do the same thing with a slight modification. I am going to try a small hole saw to put finger holes in the center for lifting the wrenches out and reinserting them. I hope this will work.

Great idea there, Airman. Ex-Staff Sergeant F-15 Crew Chief from 40+ years ago here. Geez has it really been that long??? I have been wanting to do something to get my toolbox more organized, and I think this is is a great idea. True Story: When I was at Nellis AFB, our tool boxes had foam inserts with cutouts for each tool, which allowed for seeing if something was missing. A missing tool can make people die if left in an aircraft. One of the sockets in my assigned box had a hole in the foam that was just a hair too large; if the drawer was closed too hard the socket would shoot out of the hole and wind up in the back of the drawer. I worked swing shift at the time, so I normally slept until noon or so if we didn't get finished before midnight. I got a call from the tool crib NCOIC, telling me I had a socket missing from my box, and I was the last person to check it out. I told him that his subordinate on swings checked it in, and it was there; I also told him to check the back of the drawer. He told me he did, and I needed to come in and find the missing socket. I told him to get his swing shift lackey out of bed and have him look for it since he lost it. Next thing I know I am talking to a Master Sergeant telling me that all sorties for the morning were on hold until the socket was found. I told HIM to look in the back of the drawer. He told me that the drawer had been thoroughly inspected and to get my arse out of bed and come find the socket. So I did. So I showed up in my gym shorts, t-shirt, and flip flops, hair not combed, teeth not brushed, intentionally looking nothing like the Crew Chief of the Month that I was only a month prior. I go into the tool crib 30 minutes later; I'm not in any hurry you understand. I walk in the door and everyone from the OIC and NCOIC of our maintenance unit to the Production Supervisor to my flight chief are all in there waiting for me. The NCOIC asked me where my uniform was, so I told him I was ordered to get in ASAP, which precluded me putting on an unclean uniform since I needed to do laundry. I looked at the tool crib NCOIC and again asked him if he looked in the back of the drawer. Of course he again responded in the affirmative. I walked to my tool box opened the drawer, reached to the back, and pulled out the missing socket. I then inserted the socket into its hole, and said "now you see it," I pushed the drawer closed, and then said "now you don't," reopening the drawer. I then gave the tool crib NCOIC a nasty look, and gave it to everyone else in the room. When I got to work that afternoon the foam had been changed out for stuff that was a bit stiffer and cut to the correct dimensions for each tool.

They look pretty sturdy , good info .

I like the USAF command patches on your wall.

I would love to buy a used car from you.

You talk too much. Good gawd get to the point.

Where did you order your wrap from looking to get a custom one done

Based on the information in your video your at your payload capacity before you add passengers and gear in the truck. Upgrade to a dually.

That axle is bent like that for a reason it come factory like that.

What year is that

Where does the trailer actual weight come into the equation?

Drama king..

Hello, Are you interested in testing our products? We would like to invite you to test the Camo Seat Cover for your Polaris Ranger XP 1000(if your car year is 2018-2023

I have the one, how is recording works? And also the date is every time changing after you turn off the truck

how does it feel driving, specially turning with that thing on top?

Taken a ladder to the desert to unstrap on uneven ground is time consuming and crazy talk. I can unload in 5 mins or less with my trailer.

How tall is this set up...looks like it's 15ft in the air lol

That rust is surface rust , wire wheel it off and paint it , the axel is supposed to be bent , the weight on the trailer should balance the axel out. Have you ever seen those big flat deck semi trailers that have a slight bend in the deck ? That’s designed for a reason to counter balance the weight and it will straighten out with the right amount of force. It’s not broken

Stock is just better. Ima die on this hill.😂

Hello, I have bought same fookoo cameras with 4 cameras. I have installed 4 cameras, the monitor only shows 1 camera ? I have tried cam-setup menu to fix it, but it is not showing all 4 cameras on monitor ! Have this happened to you ?

More like unboxing and the use of the word uhh and umm

Use rubberized under coating under neath use garage door springs on gate works really good rhino liner on deck

The system is totally dependent on the bolts that hold the truck bed on the frame. Seeing the bed on my 2010 ford rusted off the frame before the warranty expired, (salt in the northeast)I wouldn’t chance it. I feel much better using a trailer. The high center of gravity compounds the problem.

Any know if you can bypass the fuel water separator? 2011 6.7

This is Great! Now I can destroy the peace and quiet of the great outdoors! Hold on Bambi - we gonna rock ya world bitch!

*promo sm*

Nice work!

Use your winch to load bro. Much more safer and less wear and tear on your belt.

What a great video! 👏👏 im new in this game and you just answer all my questions, wish me luck i will do this tomorrow for my fist time 🤞🤞

900S won't ever be faster that 1000S even with the best tune and clutching. It would be close to 1000S with maybe a turbo/supercharger

I was racing 1/4 mile in my 1000S stock on 29" wheels no clutching, a cocky dude in tuned 900S, he got and intake, ecu tune and original size tires (27). I won by about 5 sec so it's not worh it and ecu won't make 900 even close to the 1000 tbh. I wonder how much more I would destroy him with clutching and tune.

"Promosm" 😪

Spent all your most of your money on bling instead of performance or durability uogrades

If that is their +6 kit from super ATV. Is it +6 on each side or is it +3 to the right and +3 to the left

Finally a honest ghost channel

🫣😬🤫

When you’re not using the ramp that’s on the truck where does it go? How does it store in the garage? That’s my biggest problem right now. I don’t know where I would put that after. I’m done using it.

Hello! I found you on RUclips because of your Ramptek videos, which I am looking hard at. Congratulation on your G Class, we have a Grand Design Imagine and love it. I am curious if the UTV rack was not what you expected, or was not working out, or if it was just time for the toy hauler? Thanks!

All I can say is 😮 ❤, really liked the music too .

I absolutely love it ! 😍 ❤ , so so cute . From this video the color looks turquoise , nice video 😊

Can Use a Dolly on a Polaris RZR800 4x4?

Well put video , like the soft music in background .

GOOD CAN YOU TELL ME WHICH TIRE YOU MOUNT IN INCHES AND WHAT WHEEL MEASUREMENTS? THANK YOU

Very informative 😎

Don’t forget to subscribe 😊

Man, so hard to believe we’re getting ready to move on from this life. Great things are on the way!

Congratulations on your retirement. Thank you both for your service.

My truck weighs 8000 pounds my side-by-side weighs 1500 pounds the rest of the cargo will be quite low at 500 pounds. The razor up there is not going to change the centre of gravity by that much but you do drive. Accordingly I drive a semi as my day job and every load that I take as a different centre of gravity, and I have to drive accordingly, so look at how high up the bottom of a semi is You will realize that you have to drive accordingly. Life is a risk. Whole adventure of riding an off-road vehicle is full of risks. This is not for everybody maybe buy a video game instead. You’ll be safe. Compared to loading my snowmobile or my motorcycles. This is cake.

Did you have to drill into your truck or bed? How was the rack secured to your truck?