- Видео 189
- Просмотров 81 107
Spray-Lock Concrete Protection
США
Добавлен 13 дек 2013
Spray-Lock Concrete Protection® provides spray-applied post-placement pozzolan products that enhance and improve concrete performance throughout its service life.
By filling and closing the capillary structure of the concrete, Spray-Lock Concrete Protection® technology reduces potential corrosion of reinforcing steel and increases abrasion resistance due to chemical and salt attacks. When applied at time of placement, SCP products provide enhanced curing and decreased drying shrinkage.
By filling and closing the capillary structure of the concrete, Spray-Lock Concrete Protection® technology reduces potential corrosion of reinforcing steel and increases abrasion resistance due to chemical and salt attacks. When applied at time of placement, SCP products provide enhanced curing and decreased drying shrinkage.
Moffit Ambulatory | Tampa, Florida
The construction team on the Moffit Ambulatory project in Tampa, FL chose SCP 327 to manage any moisture concerns for their flooring.
Просмотров: 5
Видео
What Is Spray-Lock Concrete Protection?
Просмотров 8121 день назад
An inner look into the technology of SCP 327 and SCP 578.
Floor Flatness and Floor Levelness
Просмотров 7928 дней назад
Brent and Josh discuss floor flatness and floor levelness on floor slabs.
Fuji Film - Madison, Wisconsin
Просмотров 41Месяц назад
The construction team on the Fuji Film project in Madison, WI chose SCP 327 to manage any moisture concerns for their flooring.
Episode 2404 - The History of SCP
Просмотров 79Месяц назад
Brent Rollins sits down with the CEO and owner of Spray-Lock Concrete Protection, Fred Land, to discuss the background of SCP and how it all began.
Aligned PDX Data -- Hillsboro, Oregon
Просмотров 272 месяца назад
The construction team on the Aligned PDX Data Center project in Hillsboro, OR chose SCP 327 to manage any moisture concerns for their flooring.
Episode 2403 - Concrete Strength
Просмотров 352 месяца назад
Brent and Josh talk about concrete strength and recount some core memories of past jobs where that importance came into play.
Episode 2402 - Fresh Concrete Workability
Просмотров 342 месяца назад
Josh and Brent dive into the challenges of concrete workability. Raw material impacts are examined, and the guys discuss available technologies to offset some of these challenges.
Episode 2401 - History of Concrete
Просмотров 712 месяца назад
Josh and Brent discuss a brief timeline on the history of concrete.
2 Wheelbarrows and a Place We Call Home - Promo
Просмотров 323 месяца назад
Introducing a new podcast from SCP with Josh and Brent. Have an idea for a topic, or do you have any questions? Reach out to us!
Bridge City High School - Bridge City, Texas
Просмотров 654 месяца назад
The construction team on the Bridge City High School project in Bridge City, TX chose SCP 327 to manage any moisture concerns for their flooring.
Advocate Masonic Medical Center | Chicago, Illinois
Просмотров 716 месяцев назад
The construction team on the Advocate Masonic Medical Center project in Chicago, IL chose SCP 327 to manage any moisture concerns for their flooring.
Department of Social & Health Services - Vancouver, Washington
Просмотров 356 месяцев назад
The construction team on the Department of Social & Health Services project in Vancouver, WA chose SCP 327 to manage any moisture concerns for their flooring.
Concrete Efflorescence
Просмотров 1597 месяцев назад
Brent and Josh discuss efflorescence, what it is, how to remove it, and what to do to reduce the potential of seeing it on your concrete, brick, or pavers.
Lexus of Chattanooga
Просмотров 698 месяцев назад
Lexus of Chattanooga was looking for a solution to help the concrete at their new facility last longer and look better with less maintenance. P3 Protect was utilized to treat the concrete, providing better protection from the elements.
Green Stem Provisioning - Niles, Michigan
Просмотров 1029 месяцев назад
Green Stem Provisioning - Niles, Michigan
Don Self Patio - Ooltewah, Tennessee
Просмотров 1059 месяцев назад
Don Self Patio - Ooltewah, Tennessee
Habitat for Humanity Home - Medina, Ohio
Просмотров 949 месяцев назад
Habitat for Humanity Home - Medina, Ohio
World of Concrete Booth & Session | January 22-25, 2024
Просмотров 1319 месяцев назад
World of Concrete Booth & Session | January 22-25, 2024
Johnson Controls Engineering Center - Glendale, WI
Просмотров 3810 месяцев назад
Johnson Controls Engineering Center - Glendale, WI
Self-Consolidating Concrete (SCC)
Просмотров 1,2 тыс.11 месяцев назад
Self-Consolidating Concrete (SCC)
Krivolapov Driveway | McDonald, Tennessee
Просмотров 9711 месяцев назад
Krivolapov Driveway | McDonald, Tennessee
NSU Academical Village | Davie, Florida
Просмотров 69Год назад
NSU Academical Village | Davie, Florida
699 scriscribers
Can you tell me how quickly delamination appears after pouring and finishing? I have a spot that showed up within 24 hours of finishing. I’m wondering if more could appear or does this show up almost immediately after finishing only?
All concrete characteristics are best when density of concrete is highest it can be. Durability is fine only when slump is lower than 5 cm ; even bonding of concrete requires this with Saturated Surface Dry.
Thank you guys!
What do you do if you do have moisture?
How about before installing waterproofing on a patio?
What brand product did you use? (scc) Sika?
I got same in vertical what's your comments
a detailed video on both subject and product will be highly appreciated.🙏👍👷
please make a detailed presentation on viscosity modifying agents.
Can you place it against a concrete curb and guitter without an expansion joint?
So, it's transported, spread, and compacted like asphalt. Why not just use asphalt, it's easier to work with, and in summer you don't have to worry about it getting away from you.
P3 finis
@2:19 Is Bob spraying P3 or another type of finishing aid?
Отлично . Я учусь ваш спецтехника.
A classic Josh caveat
Should you wet cure a post tensioned slab? Poured in Texas, probably 98 degrees.
❤
❤
❤
Great Video guys! Can Amorfa be added to the truck after the concrete is mixed (ie: at the jobsite) or does it have to go in the drum before the mud is batched.
Amorfa should be added into the initial batch water and introduced into the mixer before any admixtures or other constituents. After Amorfa has been introduced into the mixer with the initial batch water, normal concrete batching processes can be followed. We do recommend pretesting to determine the dosing for suitable performance.
Would like your permission to republish over on my Channel. I cover the Mortgage Field Services Industry and am actually here in East TN! Thanx!
When Does Having an Ego Become a Problem? The ego is the desire to enjoy at the expense of others, and the problem with it is precisely in that it makes us think and act at the expense of others. It blocks us from seeing how we are one with all the people of the world, as well as with the still, vegetative and animate parts of nature. Outside of the self-serving perception of reality that our ego gives us, we live in a reality where we are all parts of a single, interconnected and interdependent system. In this system, the ego makes us think and act without considering ourselves as parts of a whole system. Problems and crises proliferate in our world when our egoistic approach to life continues growing, coupled with us becoming increasingly interconnected and interdependent. On the contrary, if we think and act for the benefit of the whole system, where we consider the benefit of others and nature in our every move, then we will enter into balance with nature. When we reach balance with nature, we will experience a major upgrade in life: from a life of increasing problems and crises, to a life of harmony and peace.
I had 10k in concrete poured and it has crazing almost all over. Should I make them redo it?
Craze cracking is generally not a structural issue and more an aesthetic issue. Crazing may still occur even when every precaution is taken during placement and finishing.
@@ConcreteProtection do you think it should be redone by the contractor?
@@bgy1591 That is a conversation between you and the contractor. Crazing is not a structural concern so the concrete would be viable for the intended use. The crazing is generally aesthetic issue.
Hello, we have recently changed to type 1L cement and type c flyash. our finishers are having alot of issues with shrinkage cracking in first hours with the flyash mix. strait cement they do not. do youhave any suggestions?
We would recommend looking into initial and intermediate curing practices as described in ACI 308 Curing documentation. Wind breaks, monomolecular evaporation retarders, misting, and other methods can help reduce shrinkage cracking. In addition, some concrete fibers are also effective in reduction of plastic shrinkage cracking. Your ready mix concrete supplier should be able to share information on the particular fibers they carry.
Very interested if your type C fly ash is OK with ordinary portland cement? I don't know if there may be a shrinkage reaction between the calcium hydroxide of the type C and the calcium carbonate in 1L? Then try type F fly ash with 1L?
The purple guys!
Do you have a video on how to fix spalling?
We do not but there are several videos that others have done that discuss how to repair depending on what concrete structure you are wanting to repair.
If basement concrete treatment prevents moisture ingress will that significantly decrease basement moisture odors?
Reducing the amount of water intrusion into any space will reduce moisture odors. Any existing wet areas would need to be corrected as well. Indoor humidity can also create moisture odors as well.
You guys! 🙂
So, what is the solution if you already have dusting occurring?
Common ways to mitigate concrete dusting on an existing slab is to either apply a densifier (such as a magnesium fluorosilicate) or a concrete sealer. Both ways may require some prep work (potentially grinding the surface of the concrete), before the application of the product.
This is so well explained. I appreciate the enthusiasm which keeps it interesting.
You guys did a great job! Looking forward to doing more business together. Thank you!
Thank you
Good product
I just spent a lot of money of a colored concrete front yard. They did a stamp and a border. They had to trowel really hard as the pour was on a hot day. My questions are why is the red concrete now almost white on the stamped areas , not on the boarders ? And is the crazing the contractors fault? And what should be done, because the concrete looks like it’s a faded 35 year old slab and the slate stamp looks like crap bc it now has crazing/scaling everywhere? Thank you.
Unfortunately, there could be several reasons that the area looks that way. Without inspecting the concrete, the answers would be hypothetical and may not provide the best information for you. Inspecting the concrete can provide guidance on what happened and how to potentially correct the issues that you are having. Without knowing the root cause of the discoloration, trying to give a fix is difficult. If you would like, reach out to scptech@spraylock.com and we may be able to assist you further.
Does the finishing crew apply, or is it a 3rd party?
Anyone can apply the products; we do discuss the application with the application crew. That discussion goes over the concrete finish, equipment, and application technique.
Are you looking for labor in SW Florida area?
We are the manufacturer and we do not provide installation labor for the products. Thank you for asking.
Questionn? What if excess water added exceeding water cement ratio 0.40 in 12m3 with total concrete for of 60m3. Will it be cured and not effect the whole structure? If it effects the structure what are the remedies other than curing compound?
Any water added to the concrete that exceeds the water to cementitious ratio will affect the concrete. Concrete will cure and if cured properly, according to ACI 308 and other committee guidelines, gives the best opportunity for the concrete to reach its full potential. Exceeding the water to cementitious ratio can affect the concrete in a detrimental way, an engineer should be consulted to determine if the concrete has been negatively affected. Curing compounds are one aspect of the curing process and is not a remedy for exceeding the water to cementitious ratio.
Hello, we had a cement driveway poured about a month ago and there are some dark spots we want to fix, we were told from one source an acid wash may open up the cement pours and a different person told us it was better to use vinegar because it is less harsh and wouldnt potentially ruin the cement further like acid would but it would take longer to work, how can we fix those moisture spots
Dark spots in concrete can be from several causes and may not be moisture spots. Without knowing the root cause of the discoloration, trying to give a fix is difficult. If you would like, reach out to scptech@spraylock.com and we may be able to assist you further.
Great... How much?????
how about sodium silicate concentrate?
My school name same this
👍👍👍🙏🙏
What can I do about the problem? I already did the cement and it creating a lot dust
Good job guys!
Good video guys 👍
Hispanic hard working guys always 🙏🏽
Concrete poured in water for footing of house ... And concrete and water level r same when poured ... Tell me about its strengths and lifespan
I have the same problem all over my driveway of my new home. Should I be concerned about that and how do I get it fixed? Thanks
Craze cracking is generally not a structural issue and more an aesthetic issue. Crazing may still occur even when every precaution is taken during placement and finishing.
So how can I get rid of the dust on the concrete?
this is really good stuff. Thank you