Видео

Mine is from skirmshop NL but they also have Spain and another one . Most airsoft shops should be able to aquire one . Sometimes even if it's not on the site . Where are you from ? . I'll ask my friends where the best place is . Kind regards David

@@wodinloki9504 aye indeed ! What an excellent reply. I agree with it a 100 procent . Thank you for the compliment too . Happy holidays

Thank you so much bro . I was just on your latest vid . Gotta finish watching it but good stuff

@ No worries bro, drop me a comment and let me know what you think. 👊🏽

@GRIMTHEBERSERKER love it so far . The shiney is not for me tho 😂

@ Blinding capabilities my friend. 😂🔥

@@magfedfi thanks my friend!

@@antonino_filippini grazie 🥰🥰🥰

@@TheGun311 thank you very much for your kind words

So nice of you to say . You made my day

@@TheGun311 I am sorry for not replying sooner. I will do my best to get the answers you seek . The thing is I gave up on the project right after . Much like a lot of stuff I never follow through due to my illness. But I like helping people. So this week i will check for everything you asked . Kind regards David

@@Thariodavhey David thank you so much for getting back to me and no problem at all! I found out that 133m there’s no need to drill unless you go 150mm , also found out with my research better for accuracy than higher fps . Hope everything goes well with you. Absolutely love your channel you have done a review on every gear and have influenced me to buy gear too with all the work you do on your channel . Thank you David god bless brother

@ wow … I did not expect these words especially as I felt I had failed . Thank you so much you made my day . I am still going to build it tho . Aye I just realized that about the 133 mm to late 🤣🤣🤣

@@TheGun311 I've put in all the upgrades except the springs . I can't get the nozzle out it feels like it will break the fit is insane . I will test it like this and hopefully it works . Kind regards David

@@Thariodav Everything i said it's true thanks to all your good work brother! I invested in the MTW , speed belt , MK23 and recently the Pencott wildwood camo shirt. (because of you) i bought all these gear after i watched your video reviews :) so im a big fan of your reviews!! always look forward to one although i dont comment much. im sure there is many of us who just watch and dont comment but your videos has been very informative helping people make the right decision whether expensive or cheap.

@@magfedfi thank you for that my friend!

@@GRIMTHEBERSERKER most definitely 🥰🥰

@@antonino_filippini 🫡🫡🫡

@@Snowmans_airsoft I really appreciate that bro

@@PheasAirsoft thank you legend ! 🥰

@@GuillaumeTANNEUX if you are not set on using a 200 mm inner barrel . Then the 6 inch is a bit big tbh and funky looking . The 4 inch looks more reasonable. And is about same ish size of a normal aap01 upper . That's why I like the 4 inch version more.

@@Thariodavthank you! You helped me in my choice making. I will get the 4 inch then. Do you use a scope or a red dot? Which one do you recommend?

@@GuillaumeTANNEUX a red dot I think . Brand wise I am not sure 🤔. Don’t have that much experience in it

@@GuillaumeTANNEUX I seem to have replied to myself again. This app is maddening lol

@@Wild_death17-el7xo hmmm good point. I’ll see if I can google some info on that

@@Wild_death17-el7xo so far I’ve only found a secondary way to take the drinking valve further apart . Nothing on the SQC connection. Some people speak of adding a camelback tube to the source bladder ? Can’t verify this tho . I’ll keep looking

@@Wild_death17-el7xo does not seem to be a way to take it apart. Cleaning wise they talk about rinsing it trough and using a tube cleaner brush . Meybey put it in a cleaning tablet solution and blowing it trough with compressed air ? . Just brainstorming here .

@@deotto.ghillie.crafter thank you for compliment 🥰🥰

@@AirsoftGhillieSniper you are too kind bro 🫡

@@EvansMalben thank you 🙏

@@ahbar77 no problem my friend

@@LJ-fr1ze let me have a look my friend. Please note there is also a 6 inch version.

@@LJ-fr1ze I checked and the recommended length for the 4 inch version is 129 mm . Meaning 129 mm will not stick out of the upper . Kind regards David

@@LJ-fr1ze the recommended length for the 6 inch version is 200 mm . Kind regards David

@@Thariodav thank you very much

@@LJ-fr1ze my pleasure

The pts mk18 mock suppressor is 170 mm x 40 mm . I hope this helps my friend

​@@Thariodav YES absolutely, thanks alot

@@xhotsaucex3603 my pleasure bro

Much appreciated my friend

@@airsoft_el_salvador thank you my friend

@@JosephGraf this means alot . Thank you

were both just starting out and making a go at it

@@BillyRX22 respect bro

@@GRIMTHEBERSERKER thank you for your kind words bro

Sadly after the video I ended up not using it at all . In fact I even in the process of getting rid of it . Not because it is bad but since the time passes I acquired other replicas . I do however have a few people I can ask who have experience with this replica . I apologize I can't be more helpful.

@@Oytz just to be sure. Shall I ask my friends about the replica ?

Yes​@@Thariodav

​@@DatEmoji oki :)

@@Thariodav thanks 👑

@@diminart7 thank you bro

Good advice . Good point it's way to long . I can't argue with that . Thanks for trying bro . Have a good one

@@Thariodav I wasn't trying to be rude by any means I hope you don't take it the wrong way it was just really slow going but I hope that you try that trick of putting the very thin gaskets little rubber O-rings around the little knobs that go through the upper and lower where the pins go through it'll make that wobble go right away and my gun is tight as can be

​@@Thariodavalso I subscribe to your Channel integrate Channel it was just kind of slow going at first that's all wasn't trying to be a jerk

@@matttheroux4769 oh no not at all . I take no offense. It is very slow 🤣. That's a good tip btw .

@@matttheroux4769 please don't worry it's fine my friend. Thank you and have a good day

@@tresser8798 www.empireairsoft.co.uk/aap-01-ap7-sub-ccw-14mm-thread-adapter.html. . I hope this helps my friend.

Sorry to ask but what do you mean by tubes ? . It's been a long day .

@@ThariodavCan you remove the tubes from the shoulders and simply replace them with classic quick release (plastic buckle), like the one that DCS has

​@@kingnevermore25 sadly not . This is the one and only way the QRC works . They are very securely attached with alot of stitching . So you cant really replace or change them . That being said they are military grade plastic . So pretty durable . there are other similar vests that offer that classic clip system that you prefer . I hope this answers your question.

@@magfedfi we have those bottle options too 🥰🥰 . It is indeed a lot easier and less hassle . I might get one down the road Good point on the remote hoses thing Too btw . I love replies like this

The cow cow stainless steel one . At that time it was the only option

Thank you 🥰

Thank you for this comment my friend. Stay safe

I really appreciate that

Thank you for saying that 🥰

Thank you bro 🫡

Roger that !

Sadly not but alot of the people I follow use bloc I'll ask around.

I've had 4 people verify it will work with the Fortis . One of them mentioned it will sit slightly behind the nose but on the mask. Be notified fogging is inevitable. But hardly any glasses can avoid that .if you want a D I S C O U N T code for NB tactical one of them is sponsored . It's only 5 procent tho but all bits help . I hope this helps

@@Thariodavyes please, would help a lot

@@wb6420 I will ask and get back to you soon

@ Razgriz2024 for 5 procent off on nb tactical . Sorry it took so long

Hmmm I sadly only have lipos . I’ll ask around for you

My friend who is a tech who used to own one of these said the following : Yes it will / should, down the stock tube, but the stock will need to be extended as it's LONG But... It isn't ideal for the MOSFET Needs to be a lipo really

@@Thariodav thanks so much for even taking the time to check!! I wanna get this as it’s on sale right now for $254, but I never owned lipo before. Know the general gist of it, but just constantly keeping them trickle charged and not depleted and always checked once a week like…. Forever… seems ugh! Any recommendations for some lipo’s and a smart charger for this specific gun?

@@koofdome I kinda like the nuprol ones. As for charger I have the ASG 680 one . But I'll ask my friend for recommendations too . Be sure to look around for similar models of other brands ? . If you want I can ask my friend if he can have a chat with you. He reviews models in that range . I'll have to check what specifications my batteries have again .

@@koofdome the charger I have can do storage charge . I keep em in an old money safety metal box

Thank you bro

True . I think it’s mostly inspired by that . And thank you so much

Ah I see 🥰

Sadly not . I don't have any clue as of this moment. If I do find out I will let you know

@@Thariodav thanks! But I actually found one already. Have a look at the CTM Speed Draw Tactical Holster.

@@XAMSEEX thanks appreciate it!

That's the Desert tech lookalike silencer aka DTSS by silverback comes in 2 sizes tho they don't differentiate much . Foam baffles are obtained separately . Let me know if you need to know more Kind regards

True 🥰🥰🥰

Wow thanks ! . That made my day

You are too kind bro