Видео

Awesome!! Thanks for sharing!!

Just a question. Did you have existing hydraulic lines from the excavator already, to connect to the thumb or did you have to install those as well?

Yea tha boy could use some tools

You got taken by your hydraulic shop. They got you for two new hoses when you could've ordered the right fittings online for less than $50.

DO YOU KNOW WHAT THE MEASUREMENT IS FROM TOP TO BOTTOM OF THE MOUNTING POINTS. THANKS

хорошая вещь. такую же хочу

Only knuckleheads use channel locks and adjustable wrenches

Whats the deal with the gravel? It appears that your being picky, but not really? Never done the hydroponics, you have me curious.

Allo . Quand tu achete le pouce hydrolique .le fiting pour les oses arrive tu avec le kit ou il faut tu lachete a part

Measurements?

Can you make a materials list?

On to the Bucket. I carry 8' to 10', 10" diameter logs around for cutting and splitting into firewood. Get rid of the WINGS on the Bucket! They don't hold a log even with the hydraulic thumb. Take them off. Also digs better without them.

That oughta do it!

Can you please give me the size of the hoses that you needed? I plan on getting the same hydraulic thumb. Awesome video thank you so much.

awesome!!!

What are the measurements you used?

I think if you watch Millennial Gardener, he sd plant herbs in individual containers around your garden & it will deter pests. Also another channel said to plant Marigolds around the garden close to plants. Pests hate the smell, yet the good pollinators love it!

You are not really telling us anything.. what's the white powdery stuff around the plant? Did you add any more water or fertilize as I know since the plant has grown it will absorb water & require more nutrients.. please advise a little more in depth.

I got it working. But they don't tell you you need to bleed the air out of the cylinder. The first time I tried it, it locked with the piston fully extended. I loosened the connectors at the cylinder and a load of fluid blew out with bubbles. I pulled the thumb back to midrange and tried again, tightened the connectors and SLOWLY opened and closed and it started cycling correctly.

I unboxed the thumb and to my surprise the adapters were include to mate the Thumb hose to the QH12 hose. PERFECT!

You can replace the grease fittings with Metric zerk grease fittings. 8 X 1.0 Short. You need a 9mm. socket to remove the originals and a 10mm. to install the new ones.

Not sure why the Chinese mount teeth on bottom of bucket versus inside.

Teeth need to be mounted opposite of how they came originally !

What kind of pump do you use? That's a good distance. And how long does it take to fill the 275gallons?

I ordered the kit on March 6th. from the link and it still hasn't shipped after 10 days. EDIT: It finally shipped on the 23rd., but no delivery date yet.EDIT: Due Friday, 3/29. EDIT: Arrived today, have not unboxed it yet. I'll work on it over the weekend.

Where did you get the kit

Good job with that Thumb install. Could you have posted the link that monetizes for you since it seems you're the only one I've seen do this for the ..what I call Micro excavator from Agrotk. Everyone is calling it a mini excavator, but it it really that? Seattle/Tacoma, WA

Great video!👍🏻

I keep planning on 1 maybe 2 at my house just can't pull the trigger. Where exactly to put it ain't decided. . . so it's put off again. Thanks for the video. God Bless. NW ga.

Can you measure the thumb ram length extended and collapsed? I'm hoping to just buy a ram and hook it on my stock mechanical thumb. Also, do you know the fitting style and size that the shop put on each end of the hose? Thank you.

How many hours are on your machine...thank you.

It seems that it is out of stock on Ebay. Do you know where else I can find it?

HE DID GOOD. very helpful video. i got the thumb but my excavator from China was different . it has only one point to connect thumb (his frame has two pieces with three holes welded). i ended fabricating to pieces and welding them into the frame . it worked and i am very happy. My hoses came with the adapters already. i recommend buying the thumb and make whatever adaptation is required. Is better than buying a CAT unit or similar for a lot of money.

I was just there this past weekend. Probably the coldest week of the year. 5 inches of snow and very cold. Wife and I went down to visit friends of ours and to look at property. The roads to their rural property were all ice. Made for a fun time driving. Flew into Nashville from MD , rented a car and drove an hour and a half to their home. The rental Nissan shitbox did quite well considering. Well worth the trip because we did find property. Very excited! Enjoy the channel!!

Nice excavator and smart addition with the hydraulic thumb. You've got a great shop there as well. Saw you had a TN plate on the yellow beast. Just bought property there and cannot wait to put a house on it and move out of communist suburbia. God bless brother! Nice "Glock" art also!!

I have the same excavator. Did yours come already plumbed for the hydraulic thumb?

I fabbed a thumb for my skid loader and never use it but i have it just in case . Invest in a real machine not china crap trust me.....

Please get an impact immediately!!!

Where you bought it from?

i ordered mine from amazon, i am suspecting its from the same supplier tbh and will ship from chicago. in the ad it states i need a forklift to unload it. did you find that to be true? was it just some guy with a utility trailer that showed up or was it a freight truck?

Nice tank build. Any concern for the pallet rotting and causing instability? The frame you built will last for years, but the pallet is already older and thinner.

Instead of buying that whole unit you could have went and bought just the cylinder and hoses from Tractor Suply.

So it was already plumbed for a thumb? Just capped off? Already a hydraulic lever for the thumb?

I'm really curious what your local hydraulic shop charged you for your two new lines with new fittings?

On my H12 i needed a 16mm X 1.5 MALE METRIC X 14mm X 1.5 MALE METRIC STRAIGHT to hook up the hydraulics

Hi there, any problem with the dozer blade not going high enough? Thanks Great video

which side of the boom is out, which is in/

What hydraulic fluid do you use?

Can you tell me how to get one?

Just found your channel through a china excavator video that im thinking about buying. Just saw you have a tym as well, i just bought a tractor myself and in my research on brands and dealers i decided it was between tym and yanmar. I ended up choosing yanmaf becausr of dealership reviews, and the fact they have 10 year warranty. Sometimes i wish i went with tym. Like the lift capacity on yours is aboyt 1400 if i remember correctly, mine is only 1200, the biggest reason sometimes i wish i went with tym instead of yanmar, is the quick attach, i saw yanmar had quick attach, but its not the same quick attach as tym and skid steer has. You can get just about any universal quick attach front enx attachment from anywhere any brand. I can only get attachments through yanmar themselves, unleas i buy a skid steer quick tach conversion , which most tractors come with it like mahindra tym and john deere and kubota you can buy one cheap and easy, but yanmar its not very popular, so its about 1400$ to have one made. I thought about spending it but i said screw it and spent 300 bucks on clamp on debri forks and pallet forks. Than just spent the 1800 on the grapple