Видео

Horizontal Milling Machine, Spindle Speed : (30-1500) RPM x axis : 1400 mm y axis : 400 mm z axis : 600 mm Table Size : 1400*700 mm Motor Power : 7.5 KW Operating Volt : 400 V

2013, Rated voltage : 200V, No load rotation speed : 4875min, Grinding wheel dia : 470mm, Grinding wheel thickness : 17.07mm, Grinding wheel hole dia : 20mm, Flow : 100l/min, Power supply : 200V 50Hz. OIL COOLING UNIT - MODEL : AKZJ358-H, Power Source max : 3~200V 50HZ, Compressor : 0.75W, Pump : 75W, Blender Agitator : 50w, Heater : 1KW, Refrigerant : R410A : 0.81kg, Refrigeration oil FVC50K :...

1997, Cutting speed :137m/min/dia185, Spindle rotation speed : 236rpm/50Hz, Supply voltage : 200V, Frequency : 50Hz, Nominal power : 80KVA.

SWING : 420 , DRILLING CAPACITY S45C : 4 *19 , DRILLING CAPACITY - FC200 : 4 *23 , MAX. DISTANCE SPINDLE TO TABLE : 485 , MAX. DISTANCE SPINDLE TO BASE : 720 , UP-AND-DOWN MOTION OF SPINDLE : 120, SPINDLE TAPER : MT 3 , DIA. OF COLUMN : 100 , SIZE OF A TABLE : 370 , SPINDLE SPEED : 50 , POWER SUPPLY : 380 , DRIVE MOTOR : 0.75kW 6P , TYPE OF V-BELT : A-34?A-27 , MACHINE TOTAL HEIGHT :1279 , NET ...

2014, Maximum processing length : 220mm, Spindle speed range : 40~4min(RPM), Closing tube through hole diameter : dia52, Chuck type : Hydraulic hollow rotating cylinder, Power chuck format : B (B-208A-28), Turret type : B-side turret required, Turret head width : 280mm, Maximum tool turning dia : dia 470mm, Slide (x-axis,Y-axis) : 150 X 300mm, Cutting feed 15,000mm, Hydraulic tank capacity : 7L...

2012, Maximum processing length : 220mm, Spindle speed range : 40~4min(RPM), Closing tube through hole diameter : dia52, Chuck type : Hydraulic hollow rotating cylinder, Power chuck format : B (B-208A-28), Turret type : B-side turret required, Turret head width : 280mm, Maximum tool turning dia : dia 470mm, Slide (x-axis,Y-axis) : 150 X 300mm, Cutting feed 15,000mm, Hydraulic tank capacity : 7L...

2006, UNIVERSAL 4 AXIS, Volume : 40l, 150kg.

2008, Universal 4 Axis, Voltage : 200V,Frequency : 50Hz, 3Phase,Rated capacity : 45KVA,Control voltage AC200V DC24V, Weight : 10kg.

2013, Maximum processing length : 220mm, Spindle speed range : 40~4min(RPM), Closing tube through hole diameter : dia52, Chuck type : Hydraulic hollow rotating cylinder, Power chuck format : B (B-208A-28), Turret type : B-side turret required, Turret head width : 280mm, Maximum tool turning dia : dia 470mm, Slide (x-axis,Y-axis) : 150 X 300mm, Cutting feed 15,000mm, Hydraulic tank capacity : 7L...

2018, Control device : FANUC 35i-B, Consumption of electricity : 66KVA, Voltage : AC200V, Rated current : 190A, Frequency : 50Hz, Capcity : 340L/min, Net Weight : 6.0t.

1998, Cutter dia : 220mm, Cutter spindle motor : 30kw, X axis Swing head Stroke : plus or minus 140mm, Cutting feed rate : 0-6700mm/min, Y axis Slide stroke : lus or minus 140mm, Cutting feed rate : 0-6700mm, Z axis Slide stroke : 700mm, Work slide fixed : 320mm, Chuck : hydraulic drive, Tank capacity : 13.5l, Motor : 0.07kw.

2006, Universal 4 Axis, Voltage : 200V, Frequency : 50Hz, 3Phase, Rated capacity : 45KVA, Control voltage AC200V DC24V, Weight : 10kg.

TYPE : END HOLE DRILLING MACHINE, MAKE : NISSIN, MODEL: SMG-100R, 2018, Control device : FANUC 35i-B, Consumption of electricity : 66KVA, Voltage : AC200V, Rated current : 190A, Frequency : 50Hz, Capcity : 340L/min, Net Weight : 6.0t.

1998, Supply voltage : AC200/220V, 3Phase, Frequency : 50/60Hz, Rated : 36KVA.

TYPE : MEASUREMENT ENGRAVING MACHINE MAKE : NIDEC TOSOK MODEL:12KVA

TYPE :COMPOSITE LATHE MAKE : MAZAK Model INTEGREX200-2SY

TYPE : OIL HOLE MACHINING, MAKE : NACHI FUJIKOSHI, MODEL : UN-788

TYPE : OIL HOLE MACHINING, MAKE : NACHI FUJIKOSHI, MODEL : UN-786

TYPE : HORIZONTAL MACHINING CENTER, MAKE : FUJIKOSHI, MODEL : HMC, SPEC : 23.5KVA.

TYPE : 5 FACE MACHINING CENTER Manufacturer OKUMA Year 2004 Model MCR-BII 30×4O OSP-E100M

TYPE : 5 FACE MACHINING CENTER MAKE TOSHIBA YEAR 1997 MODEL MPF-2114C

TYPE 5 FACE MACHINING CENTER Manufacturer OKUMA Year1991 Model MCV-A20*30

TYPE : 5 FACE MACHINING CENTER Manufacturer MITSUBISHI Year1990 Model M-KR32/37

TYPE : 5 FACE MACHINING CENTER MAKE MITSUBISHI Model M-VR38/42A

TYPE : SIMULATE ENDURANCE TESTER NO.1 UPDATED MAKE : SAGINOMIYA MODEL : CPH-400

TYPE : CROSS HOLE MACHINING, MAKE : NISHIDA, MODEL : HF-4

TYPE : LARGE CUTTING MACHINE MAKE : KAMETEC MODEL : YEC 3S M06031

TYPE : CROSS HOLE MACHINING, MAKE : NISHIDA, MODEL : HF-4

TYPE : TORSIONAL FATIGUE TESTING MACHINE (300NM, 500NM), MAKE : SAGINOMIYA, MODEL : TT-500