Видео

Hello my wifi doesn't connect on my MacBook pro touchbar 2016 Sorry for my english i'm french

I have a 1998 drango 5.9 l. Bought it new. Wonderful daily driver. 125,000 miles. Love it

Thank you very much about removing the cover clip helped me a lot and to not break mine when I removed it 😊

What should we do if we put too many pieces of lead and it gets stuck?

I bought a used 2002 Durango 4.7 I love it / $1400 250,000. Still running great

Best bang for the buck v8 you can buy.

Are the Chrysler headlight assemblies interchangeable with the VW Routan lights?

Just a question, have you ever had an issue with the transmission?

Thanks

Nico video. Any idea of how to pull out the big yellow one ?

Thank u sir for this video

In a few years, you'll get to replace the y-pipe after the outlet of the pump. The rubber molding that joins the three 5/8" heater hoses starts leaking, so you get another coolant spot in the same location under the vehicle. Napa (and others) sell an aluminum y-pipe repair kit that's much less expensive than a replacement OE-style full molded y-pipe and hose assembly. Dorman 47238H. Both leaks happened on our '01 Durango. Just a follow-up on my previous comment. Finally got around to replacing the y-pipe assembly underhood on the Durango. The Dorman y-pipe kit will not work, as the heater hose assembly y-pipe has both 3/4" hose size and 5/8" hose size. The Dorman piece is 5/8" on all three barbs. You have to get the whole heater hose assembly to do the job. Napa sells one that's around $130.00 (part number 626555). The y-pipe on theirs is not molded rubber, but a steel piece with plenty strong spring clamps. Easier to replace than it seems. You have to remove the inner fender liner. The fender flare/wheel opening molding does not need to come off. Once the fender liner is out, the job is pretty straight-forward. Then when the fender liner needs to go back in, the two steel rivets that are inboard near frame rail can be replaced with bolts/nuts. The remainder of plastic rivets that had to be popped out can be replaced with plastic clips similar to (but slightly smaller than) the ones that hold the front radiator undercover on. I had to post this, as I didn't want anyone to buy the individual y-pipe and find out, as I did, that the hose sizes are different.

Thank you man! I found the problem, my radio wasent working and i saw this video and that was the problem, thanks !!!

You are lucky you were able to get up there. I have visited Initial Point many, many times over the past 16+ years, no problem with the road leading up to it. Sadly, the road is so torn up now that I can only get to a certain point on the dirt road before turning around. It saddens me what has happened to that road. For many, many years the road was accessible. No longer for those of us who drive sedans. Thanks for sharing.

Thank you! I also found that many places did not carry the correct rear blade. I thrown at least three away. This is great info.

Im so glad i'm not the only one that needed this video. Thank you so much.

omf life saver I swear

Well Prof, I tried this, but I couldn't loosen my old struts. I have the new struts. Might need to go to a shop, just for that. Thanks, though, cause otherwise it looks easy!

That’s a cute little doggie! I have been thinking about installing KDE Neon on my 2015 MacBook Air.

Good video, i had a 2000 durango and i really like this car.

Too many leads to insert at one time!!! For a Tul mechanical pencil, no more than three at a time!!!!

Hey there! I'm glad to see I'm not the only guy driving one of these awesome beasts around still! I actually was just about to replace them with the 922's, but noticed last time the housing was getting melted. I was going to make a heat shield with some tin foil. If they burn out again, I'll have to go digital $

In my 2009 Kia Sportage there are two fuses the power of the radio. One is called AV and the other one is called audio in the diagram. I had replaced the audio one but that did not work. But checking The AV one showed it to be blown and replacing it fixed me up. I really appreciate your time

Great Video Strait to the point

How many pieces of lead can be inserted at one time?

D=

Hello from Martinsville VA I really love the 1gen dodge durango I just bought my 3rd one

Awesome vid. I just fixed my girlfriends radio on her 06 Sportage with your instructions. Thanks for sharing.

YOUR TELLING ME IVE BEEN PUTTING LEAD IN THRU THE TIP AND I COULDA JUST DONE THIS????????

My alternator started to sound like shit…and yes, I encountered that problem too, having to jumpstart it and getting stranded once out of town.

Love these first gen Durangos. Great vehicles. I still see them in the road. Thanks for the review 👍

Thank you!

Thank you! I found one of these pencils on the ground in my school and I really liked the design, I just didn’t know how to refill it without shoving the lead through the tip of the pencil.

So this happened to my durango yesterday. I'm getting both parts today, but question.....what if the rear is blowing but no A/C or heat blows? Just rear fan on rear settings?

What part number is the wiper blade?

Someone knows if you can disassemble it?

These Durangos are very solid vehicles. I have a 98 and a 99. Installed a 2 inch lift kit for $400. A torsion Key on the front and add a leaf rear. Added some Bilstien shocks and it really improved the ride overall. I paid $300 for the 99 with 132K miles and paid !500 for the 98 with 96K miles. I have many other vehicles and same Era Dakotas. The MPG is the only downside I can see with these. I get between 15 and 17 hiway mpg and 13 to 14 city. One has a 5.2 and one has a 5.9.

Thanks for the review!

Absolutely beautiful hands down the Durango first generation has to be the best SUV ever made besides the Jeep Grand Cherokee those durangos are still on the road everywhere I saw a blue one last week in Syracuse New York beautiful shape!

Cuamtovale

thanks

Thanks for the vid!!

Thankyou!

Hmm, my leads can’t seem to enter, I looked down and there seems to be tiny holes in there so I put one by one down the tiny hole, put the cap back but it won’t protrude new lead out, the pen tip seems to be loose as well

Thank you for that! haha I didn't want to break my tul pencil! Cheers!

Thanks will try soon

Yeah then professional the song always know how to do with the fastest and best way either. Common sense doesn't have a certificate. Thanks it was right to the point not allot of yapping... Best RJ

Great video! Thank you!

Nice job!

Way too obvious of a problem. I had same sc code on my 2 year old Samsung washer. It was a bad drain motor. My filter was clean. We don't have pets. My advice to everyone out there. Don't buy a Samsung washer and dryer. Nothing but problems. Wished Kenmore was still around through Sears.