Видео

Thanks Bro. If I'm alone, I mostly play the back tee, if I'm with a group, I play the same tee as anyone else. Whatever the tee, I'm rarely on the Green in regulation anyway. So to me, regular or back rarely make any difference (unless there's force carry over water like in Blue Sapphire Ocean course). What matter the most to go low is the short game.

My SD Card is formatted in FAT32 and is only 2GB. In the manual, it is indicated that 2GB is the maximum, but I saw comments that 32GB was supported. Just for confirmation: you need to extract the SD card from the device and read the content in your PC.

@@ChrisJP2024 thx for the reply.. Yes gst7-ble supported up to 32gb. i managed to get it working after trying 3 nos of sd card. 16gb, 64gb and other 64gb. Thats the smallest that i have. I try the 64gb first just to try my luck but it never show the animation at the screen.. after that i found a 16gb card and try again. This time it shows the animation but fail to write. No files when read at PC. Then i msg u here and contemplating to buy smaller sdcard size. But worry it might still wont work. I have another sd card in my car dashcam but its 64gb. As previous 64gb doesnt work, maybe due to its size >32gb. Im skeptical it will work. So last try.. To my suprise, it finally work even with the bigger size..

Glad it works!

Thanks for sharing! Your experience will help other.

Glad it was helpful. Have a good time on the course.

Hi mate...It's Rinshi-no-mori Park. Not that big but only 500m from home...This is where I usually go run. Not really suitable for bike ride, but better than road when you're learning to ride again.

Would be way nicer to ride in Busan!

Thanks mate. See ya Friday for Golf.

Just downloaded some golf VDO and cut off some of the comments that I thought I could use as sound bites.. There's a lot of golf compilation (eg: worst shot ever...)you could use comments as well

@@jjlp yes, the flash card memory is not sufficient to load all 4 maps. You need to select the one you want to load. Congratulations for reviving your S2

Yes, I have PP/AE too, but those templates were for Vegas

@@ChrisJP2024 Ah... I see... that's a shame. I use Premiere Pro... and the score template was so cool that I wanted to use it. Thanks for the reply :) Vegas template is so cool

Sorry, lost the old project But I'm doing an upload of my most recent template, which is way nicer. A lot of the work has been automatized (check the controller), but you need to be familiar with After Effect. drive.google.com/drive/folders/1idr69_2kVZnWMN1VfESb3uYKDH8wwaAo?usp=drive_link

@@ChrisJP2024 I really appreciate you sir! thank you so much, have a nice day!

@@FutureInsight_J Will be happy to see the result of your editing. Please keep me posted. And if you have some suggestion, let me know.

Hi Jonas Happy to help, do not worry to ask question. I do believe that the message "No COurses Nearby" is coming from the fact that the course are not present (or not recognized). So my opinion is that you first need to fix the connection issue with Garmin Express, then reinstall the course using Garmin Express. I suggest to erase everything on the watch, then do a Master Reset (no need to reformat at this stage). The watch will reinstall the GarminDevice.xml (it takes some time) and Garmin Express should recognize your watch as a S2.

I sent you a quick response on your thread on gpspower. I think what I need is the gmapsup files. And place that on the sd card. I have tried reseting, formating and loading it to Express probably 100 times. I know the watch is reading the flashdrive since the Time zone file is working. You are the Garmin wizard!

@@Jonaslemberg Followed my own thread but could not locate your post: I suspect that it is your first post in the forum, and administrator need to review and approve. Anyway, you cannot just copy the map on the watch flash drive. Those maps are "protected". This is why you must first be able to connect to Garmin Express, then you will be able to install the maps on the watch. ruclips.net/video/hn-qJV-5Up4/видео.html What happen when you connect the watch to Garmin Express?

When connected is says found a whatch to add. Do you want to add it. I click yes and it installes the time zone img/iso file. I never see any options on updating course or reinstall course. My thought was that the flashdrive is missing the Gmapsup eeprom file.

@@Jonaslemberg If Garmin Express sees and install your watch, then you're almost there! Follow this VDO tutorial: ruclips.net/video/hn-qJV-5Up4/видео.html

Hi The two thing coming to my mind are satellite location issue or missing map. 1 - Checking Satellite Are you using Automatic time? If the Automatic time is correct, it; mean that the watch has correctly located Satellite a some point. It's a good sign When you start the round, does the watch correctly locate satellites? 2 - Checking Map If you have no issue locating satellite, then it's possible that your area' s map is missing? Have you checked that the map for your area is correctly loaded using Garmin Express? You could try to reinstall the map, choosing only the one for your region (Pacific, Europe,Middle East, Africa, Asia Medium or North&South America) Note that if you have reset the watch recently, it takes time for the watch to initiate again the geolocalisation. Better be in an open space, start a round and wait for the watch to locate satellite. You can move around no issue. I hope it helps...

Hi. Thanks for replaying. 1) automatic time works and when I start a round it located satelite. 2) I dont have any maps and I never get the download maps in Express. Thats my problem. I wonder if I can sort of force in an older version of the software or upload maps manually.

Ok..Best is to connect to Garmin Express, but you can't connect to Garmin Express because the watch is recognized as Vivoactice HR? If so, can you open GarminDevice.xml in the Garmin folder? What is the model ? (see VDO around 5:30). What do you see in <Description>? ( Should be S2) EDIT: You cannot use Garmin Connect to update the S2 because the S2 has no bluetooth connection. The only way to keep the S2 updated is via Express.

Jack no good! 😆

Hahaha....The battle for the highest possible Handicap is already on? 🤣

No, just everyone else's is going down 😂

If I go down, we all go down 🤣

I think I even said that at one point in the video 😂

Even for the few having valid HC proofs, all those are just last minute make up numbers anyway 😋

Thanks mate! I'm using After Effect so I can do my own tracing. If you are familiar with AE, I did an overview and share the project here: ruclips.net/video/6aFcnlfP2nY/видео.html I since then automatized some of the features but you still need to manually trace the ball flight - no automatic detection.

Thanks mate. More efforts going into the editing than my golf swing indeed.... Can't do it all 🤣

Thanks mate. The next VDO will be the 4th and final game @ GrandPrix....

Nevermind - I read the comments better - thx

Thanks mate. Made my own motion graphics templates (MOGRT) in After effect. All data are pulled out of and Excel file so I only need to select the player/Shot/hole number. Speed up editing A LOT! Done also my own Extensions in Premiere... As for the Holes, I've just extracted them from my Garmin App...

For the moment, I'm afraid you have to settle with Part 2. But I'm sure we will be back soon!

Looks like one of you didn't a girl this time. "Our fairway?" HAHAHAHA

@@casualguy393 Karma's a bitch 😭

@@tokyosteve1223 That's what you get for laughing at me hahaha

Cookie point if you guess correctly who's the Dude's Dude.@@casualguy393

Was tough to edit...But wait, Blue Sapphire is next 🤐...

Why they were not signed up by Q School on the spot is beyond my understanding 😂

@@ChrisJP2024 it was probably all the 8's 😂🤦‍♂️

Wow...That was quick! Some faces are awfully familiar indeed! 😎

Glad it was helpful!

After formatting, you need to perform a master reset. This is necessary for the firmware to write all the necessary files on the watch drive. Plug your watch on a PC and acces tge drive to double check. Could you format in FAT12?

@@ChrisJP2024 Thank you for the reply. I did a master reset and went through the setup items. I removed it from Garmin Express and then tried to re-add it. Unfortunately, Garmin Express can't find it. I'm on a Mac by the way. I can see the Garmin in Finder and the device seems to work fine other than I can't add any courses to it.

@@ChrisJP2024 I can only format in FAT16 it appears

@@billrector If you have reformatted the drive, and the watch firmware has reinstalled the Garmin folder, then all fine so far. It might take time for teh firmware to reinstall all the file though... I suppose your PC recognize the watch as a Flash Drive so we will consider that the connecting cable is good. Some tests you can do now: 1 - Make sure you can see a GraminDevice.xml file in the Garmin Directory of teh watch (this will allow Garmin COnnect to discover your watch) 2 - Check what are the map installed by default via the service menu (Map Checksum) - Is your region already installed? You should be able to see it in the Gramin directory as well. ruclips.net/video/4bh-N4zqQWE/видео.html 3 - After a reset, the GPS will take more time to lock on location. Go outside and try to lock on satellite: does it work? Is the time properluy updated? What is the message that you get from the watch when looking for course?

Yes FAT16, (FAT12 is a typo)

What issue(s) were you trying to solve before entering Preboot? Have you tried a Soft or Master Reset first? Can you still enter Setup menu?

@@ChrisJP2024 I got it working. I have a Garmin Approach S2 watch. I format the the flash drive, but it wouldn't let me do FAT32. I had to do FAT16. I can't upload the North America map not enough memory. Is there anything more I can do. Thanks for your help.

@@eremitaburnell1294 Glad you made it. Unfortunately, there is not enough space to keep all maps on the watch. You have to remove some to make space for the North America one.

I did not find a way to switch from m/s to mph either. I'm afraid it is not possible. You need to mentally calculate (multiply the data in m/s by 2.2 to get in mph)

Thx a lot, I just find the screen has mph but can't find the way in the manual😂

Hello. If you are not familiar with AE, it might indeed look complicate. But for people already using AE, trust me, it is not complicate at all.

The music and only the good shots... (or Shot ???) 🤣

I wish I could help but unfortunately, I don't use Davinci Resolve

@@ChrisJP2024 Aah, ok. You should check it out 😉 I switched from Adobe Premiere to Resolve like 6 months ago. Such a great program 👍

Thanks! Wish you the best.

Think about the coefficient as a correction to the calculated distance. If the carry distance is always longer (or shorter) than the calculated distance, you can adjust with the coefficient. In your case, since there's less loft on your club than the one used by the device, the calculated carry distance could be lower than the real one.

Hi Andy I've just check and everything works fine. Which Vegas version are you using? Are you having issue with the 4 packages? Have you tried this one ruclips.net/video/H8Sli4UXZx4/видео.html ?

Thanks.

I suppose you are using the unit in the way there are suppose to be used: 1 to 1.5 meter straight behind the ball, with the unit height about the same as the ball (in case the ball is on a mat, you need to lift up the unit - there is a bracket for this). If that's the case, then if the unit is still under warranty, try contacting the seller as the unit itself doesn't seem to be serviceable.

@@ChrisJP2024 thanks yes it is used within the correct parameters. i noticed it seem to mal function when its under the sun, temperature issue maybe?

The GST-7BLE is the latest model. It uses lithium ion battery rechargeable via the USB port. They do not seems to be easily replaceable as there's no access to battery. I never tried foam or whiffle balls - even if it could measure the ball speed at impact, the theoretical distance will not be close to real ball. Finally, regarding the difference between GT5W/5GL and teh 7GL, I do not own the device so can't answer. Best would be to look for comparison at Amazon or Retailer spec www.yupiteru.co.jp/products/golf_trainer/

So what do you think? Ready to tackle AE and pimp your swing?

Hi MJ I'm using After Effect.

@@ChrisJP2024 Can you tell me how to make it? Or, please recommend a video for reference.

@@mjyoon5903 If you are familiar with After Effect, I do not mind sharing the project. If you are not familiar with AE, you could try first this: www.shottracerapp.com/ If you are familiar with AE, I can share my project with you but there's no tutorial. Finally, if you are willing to look at AE, I would recommend to start here: ruclips.net/video/F_10ktTjHVs/видео.html

@@ChrisJP2024 I want to share the project. But I shouldn't write my email address. ㅠㅠ How can I contact you?

@@mjyoon5903 No need to contact me. I will upload a VDO with a brief description of the project in AE, and the link to all necessary files. Just give me a bit of time. I will do it by the end of next week for sure so please make sure your notification is on (the bell) so that you will be noticed when I will upload.

Thanks I did not find the time and energy to do a full tuto and share the template. Quite simple honestly using AE, just need a bit of patience to trace the club head and ball flight.

If you happen to try the AE template, let me know how it goes. ruclips.net/video/6aFcnlfP2nY/видео.html

Hi Mark. You need Vegas Pro to open and modify the template file (*.veg) and Vegas is not available on Mac.

Done it for educational purpose as I own a 235 (VDO coming up soon). I'm reselling both at cost (55 SGD), then I'll buy something else. www.carousell.sg/p/garmin-forerunner-220-1128389407/?t-id=22684436_1638178086266&t-referrer=%2Flikes%2F&t-tap_index=6

Hi William. First, turn your device off. Then press and hold the up arrow (the one of the right). Press on the On/Off key to start the device. Keep holding the up arrow untill the blue light start flashing (about 5 second after the device turns on) It works on mine, exactly as per the VDO starting 5:22 Also, please check that your version is a GST-7-BLE (written on the back of the device)

Hi Chris think mine is of different version .That why is not working.cheers

I have a GST 5GL which has less options.

You need to have a Bluetooth compatible model (GST-7 BLE) Then follow instruction from 5:22

Mandatory 36 holes everyday to compensate for the loss time!

Great round James, congrats. Did not had a chance to go back to PalmSprings due to the travel restrictions so always good to get some fresh news. Thanks for the update.