Видео

You don't have to do anything, just put the phone on the left side and the watch on the right side and everything will charge automatically

It dont work here. Same watch and charger..

Means watch 7 doesn't support wireless charging ​@@EspenHansen-y6o

Very good engine if in good condition, I had a little problem with the nozzles

@@zoomed8609please what was problem mine sounds same

160eur in EU

The device is connected to the gas boiler with a cable 2x0.75

So is yours a wired easy control or a wireless 🛜 connection I have the wireless connection one and all the instructions are just a plug to give it power because if the wireless one was wired to the boiler how does the tablet mount for the easy control work when the table mount is just plugged in to a power supply

there are two ways to connect the device, the first way is when I connect the device to the wall and connect it with a cable to the gas boiler and then I can control what I want with my mobile phone​@@ivecamperbuild_thomas4084

the second option is when the device is placed on the table and connected to the easy control RF key without wires​@@ivecamperbuild_thomas4084

Bosch EasyControl RF Key - Part no. 7 738 112 351

Eta tolka tak viglegit na vidio, v zizni net takova, lazer atlicnij bjot daleko i jarko

The exact specification is at lem-motor.com

@@zoomed8609 48V 12A refures to 4 pieces of serially connected 12V lead acid batteries. I see.

exactly! 😂

Yes

@@zoomed8609 is it long life motherboard

And are u still using it

@@zoomed8609 ?

Now i use gigabyte z370 gaming 5, but i used z97 for about 4 years without problem

650w

@@zoomed8609 your wrong i contacted Philips and its 900w

@@waynegarrett1614 No it's a 650w model, the video can see the markings

@@zoomed8609 FC9744/09 is 900w This is the reply from Philips support: Hello, vacuum cleaner model FC9744 / 09 has a power input of 900W Can I help you with anything else? For Philips Martina.

@@zoomed8609 We just got our hover from Philips today and ours is 900W so it ni=ust be a new model but the model numbers are the same. On the box and on the hover itself is written 900W

The mower needs a bit pimping, at the very beginning I added big washers to all screws to get a better mechanical connection, the screw area is simply to little. I did some more finetuning, also glued the handle bar at the lower pins with PU window glue to get a solid contact and sealed the deck inside. So, it's China made but still better than most other mowers in this category. I can also tell: Sharpen the blade when it's new. Also bold it on with 50 Nm, it got plastic 'clutch-washers' so if it hits anything, the engine shaft should not bend. Still a relatively thick shaft, I saw thinner ones on other mowers in this range. But to be honest, a real good mower tends to cost double as much.

@@yo3429 good advice! Too be fair after welding the deck mounting points, beating the crap out of crankshaft with a lump hammer, I think I'll get some more seasons out of it. Anyone buying one of these should be aware they are not built like tanks though. Your pimping up sounds a very good idea, a stitch in time! Happy mowing.

Ich habe die einzylindrige Variante davon jetzt seit 8 Jahren. Er ist dicht und funktioniert bisher tadellos.

There is no fault in the heater, but if the gas cylinder is completely new, then for the first time you have to lower the excess that has accumulated at the top of the cylinder, keeping the gas valve slightly open, and then connect and start the heater and everything will be ok

Thanks worked great

Yes i recommend this Rapid stapler with Rapid staples, it works exactly without any problems,..... but there are problems with the rubber parts, coming off

​@@zoomed8609 감사합니다. 당신의 영상을 통해서 고무소재의 적용 여부를 확인할 수 있었습니다. 경험에 따르면, 고무는 수년 후에 끈적임이 발생할 확률이 높습니다.

Miele cx1 290eur Philips FC9744/09 180eur

@@zoomed8609 here Miele 550 euros, Philips 280 :(

@@pericanikolic6665 Very expensive, if there is such a big price difference then I recommend taking Philips and not overpaying...

I have been using chainsaws for 3 years and no defects have been observed

@@emanuelemaggi487LV 270eur i pay:)))

​@@zoomed8609 does it still work? What is your opinion about this saw?

Hola, estoy en dudas de comprar una motosierra Sthil Ms 250 0 la hecho Tu cuál elijes? Gracias!!! Saludos dede Argentina.

430eur in LV