Sky
Sky
  • Видео 50
  • Просмотров 233 533
Stalker 2 out of video memory error crash fix
14900ks system.
It’s most likely you’re overclocked, but running as administrator and adjusting your overclocked will fix the problem almost certainly. It did it for me and I have some pretty hard-core over Clock on both my memory and my processor. I just had to adjust my processor over clock a little bit. Problem solved. 
Просмотров: 315

Видео

Prism RGB Review (The best hardware available for your lighting.)
Просмотров 289Месяц назад
After extensively testing multiple types of hardware and software. I feel like I can fairly conclude that Prism RGB performs significantly better than anything else on the market, but don't take my word for it. check out the review. I am in no way affiliated with Prism RGB and I am making no money off of this review. I am just giving credit where it is due. Big companies like Lian li have been ...
Overclocking Gskill DDR5 6000 2x32 64GB to 7000 with tight timings & CAS 30.
Просмотров 495Месяц назад
Ok. so same kit from last time but this time I really pushed it. This is the limit I am comfortable messing with and I use the term "comfortable" lightly lol. Stable in memtest Anta777 Extreme for one hour and thats good enough for me. My memory has the shrouds removed and a 140mm fan blowing directly onto them. You will need to do this if you want this to remain stable most likely. Use a heat ...
XTU and HWinfo64 Current/EDP Limit Throttling - IA: Electrical Design Point/Other FIX. 14900
Просмотров 3,7 тыс.2 месяца назад
NOTE: You can use the Asus OC profile and stop it from syncing all of your cores by manually setting your core frequencies maximums in bios.  So this video is a testament to how unnecessarily difficult it is to understand modern bios. I miss the good old days of overclocking with six settings. I so miss those days. And Intel wonders why their chips are frying. 😩 I hope this helps somebody beca...
Stupid fun modifications and keeping your ram cool for cheap.
Просмотров 2562 месяца назад
So I overclocked my ram and it got incredibly hot, we’re talking 75c in anta77extreme. So I took off the shrouds and custome cut a Noctua fan housing to be less intrusive, but the RGB lighting became so bright that it was an eyesore. Here’s a trick I did fix that. Might give people some ideas. Obviously modifying this kind of stuff inherently comes with risks, so please be careful. 
Overclocking 2x32 64gb GSkill DDR5 6000 to 6600 with tighter timings. Intel 14900 ks
Просмотров 4952 месяца назад
EDIT: Change Tras to 66 please. It can be iffy as temps go up. And since I got better cooling on the ram, I’ve managed to drop the voltages to 1.45 from 1.47. I also dropped the SA to 1.15. Stable so far. I’m going to try reducing TX and memory controller voltages a little bit as well.  I see a lot of videos doing 16 and 24 GB, figured I would do a little 2x32 GB OC guide for this 64 GB kit. ...
Alfa Romeo Rattling Sunroof Fix
Просмотров 4292 месяца назад
Common problem with the Alpha Romeo sunroof here and a $10 fix that might take about 15 minutes of your time. I hope you enjoy. PS: Criswell Maserati, you have the worst customer service I’ve ever seen in my life.  🍻
Reduce Signal RGB CPU Usage
Просмотров 4493 месяца назад
Signal RGB was running pretty high on my CPU usage around 15 to 18%, spikes above 20% when it was open. Using the simple trick and process Lasso I was able to drastically reduce the CPU usage to around 10% well not affecting performance at all.  after a while, my CPU usage stabilized around 5-6%. I hope this helps. UPDATE: New updates to the software have pretty much made this irrelevant. It...
PC liquid cooling loop suction noise fix.
Просмотров 473 месяца назад
I was having a problem where I heard this recurring loud noise that sounded like suction or a discharge of pressure in my cooling loop. After further investigation, I figured out what was causing it and how to fix it. This may be very common in distro plates, and I suppose other types of loops as well.  I hope it helps you. 
Samet the Turo scammer
Просмотров 527 месяцев назад
Rented this Maserati from Turo. The host “Samet” posted a bunch of old pictures of the car that made it look like it was in beautiful condition, but this is what I actually got. A car with absolutely destroyed interior, there were buttons missing from the vents so the vents wouldn’t even turn. All of the soft touch surfaces were completely melted, sticky, and black stuff kept coming off on us w...
Saltmarine charters Biscayne Miami Florida.. Beware..
Просмотров 8388 месяцев назад
Malfunctioning boat, destroyed snorkeling equipment and a snorkeling location that was just about nothing but seaweed with a rip current so strong it was dangerous. If that’s what you want for your vacation, by all means use this company. Owner has not been responsive to my calls or messages regarding the issues. If you don’t believe me, look at the pictures and video of the boat which continuo...
Final fantasy Stranger of paradise crash on launch fix and 4k fix. PC.
Просмотров 320Год назад
Crash on launch? Try this simple fix. Also if you can't initially setthe resolution to higher than 1080P. Start the game, set it to full screen at 1080p. Then restart the game. Should be available now.
Fable anniversary crash fixes
Просмотров 565Год назад
Brand new system CTD on launch? Other crashes? Try this. Don’t mess with files at first. Find the games executable in the steam directory. Steam apps/common/fable anniversary/Binaries/Win32 Fableanniversary.exe Right click and create desktop shortcut. You may have to right click, then go to properties, then more options, then send to, then desktop create shortcut. Right click that shortcut and ...
Elden Ring Rune farm 2023. 70,000 runes every 30 seconds.
Просмотров 9 тыс.Год назад
Just a rune farming method that combines two methods and doesn't require you to beat the game and have the sacred sword most people use. Gets you about 70,000 runes per quick run. I haven't seen a faster method, that's including the cheesy ones where you fall and swing your sword. It requires some skill, timing and distancing so it's not just super boring lol. Hope you enjoy.
Custom mods with Lian li and Signal RGB. 13900k Hard line acrylic and 4090.
Просмотров 179Год назад
So I’ve been having a lot of fun doing some custom modifications with the Lian Li strimers and dynamic Evo case while using Signal RGB. Thought I would show the results so far. Hope you like it. 😁
Baldurs gate 3 Flickering images fix NVIDIA
Просмотров 4,5 тыс.Год назад
Baldurs gate 3 Flickering images fix NVIDIA
Jennifer the ultimate Karen
Просмотров 74 тыс.Год назад
Jennifer the ultimate Karen
Xtron 12.3” BMW Android 12 display upgrade.
Просмотров 7 тыс.Год назад
Xtron 12.3” BMW Android 12 display upgrade.
DO NOT BUY. BMW Climate control and radio panel, touch screen upgrade installation. 2013-2019.
Просмотров 7 тыс.Год назад
DO NOT BUY. BMW Climate control and radio panel, touch screen upgrade installation. 2013-2019.
Kerbal space program 2. 1546 part ship "Castle"
Просмотров 603Год назад
Kerbal space program 2. 1546 part ship "Castle"
Hogwarts Legacy. When you require too much of your room of requirement
Просмотров 46Год назад
Hogwarts Legacy. When you require too much of your room of requirement
Kerbal space program 2 (KSP2) First launch and surprise landing on the Mun with no landing gear.
Просмотров 174Год назад
Kerbal space program 2 (KSP2) First launch and surprise landing on the Mun with no landing gear.
13900k RTX 4090 EKWB velocity V2 Arous master
Просмотров 917Год назад
13900k RTX 4090 EKWB velocity V2 Arous master
I9 13900k RTX 4090 Gigabyte gaming OC. New build.
Просмотров 372Год назад
I9 13900k RTX 4090 Gigabyte gaming OC. New build.
Hogwarts legacy out of Video memory error FIXED.. No, seriously.. FIXED.. UPDATE: READ DESCRIPTION.
Просмотров 4,9 тыс.Год назад
Hogwarts legacy out of Video memory error FIXED.. No, seriously.. FIXED.. UPDATE: READ DESCRIPTION.
I’ve been working on this for a little while now. Really happy with how it’s turning out. 😁
Просмотров 175Год назад
I’ve been working on this for a little while now. Really happy with how it’s turning out. 😁
Stop the mouse from waking up the computer from sleep.
Просмотров 5 тыс.2 года назад
Stop the mouse from waking up the computer from sleep.
L-Connect 3 CPU usage fix
Просмотров 8 тыс.2 года назад
L-Connect 3 CPU usage fix
L3 connect Lian Li wrong CPU temp fix.
Просмотров 6 тыс.2 года назад
L3 connect Lian Li wrong CPU temp fix.
Half life Alex crash fix Mongoose error
Просмотров 1,1 тыс.2 года назад
Half life Alex crash fix Mongoose error

Комментарии

  • @ZennybearOG
    @ZennybearOG 7 часов назад

    TBH I feel like a tool for not sending this thing back and pressing HP until they fixed their shit. I use the mouse mostly and really needed this thing but it's really not acceptable to ship a laptop like that.

  • @brandonanderson7363
    @brandonanderson7363 День назад

    @DSBsky77 im having the same issue but not asus. Could you translate this fix to a razer blade 18 laptop with a i9-13980hx?

    • @DSBsky77
      @DSBsky77 День назад

      @@brandonanderson7363 I really can’t. I’m not even sure you can do it. Sorry.

    • @brandonanderson7363
      @brandonanderson7363 4 часа назад

      ​@@DSBsky77 no worries at all. I engaged Razer to see what they say

  • @05greedy28
    @05greedy28 12 дней назад

    Their is more the enough length on the red wire. You just not feeding it in the right location. As for the aircontroll unit not working... their is a hiding setup menay where you must change the settings. So it knows if you have single or dual control and also the fact you have heated and cooled seats or not

    • @DSBsky77
      @DSBsky77 11 дней назад

      @@05greedy28 there may be enough length on your car, but there isn’t on mine. Don’t try to tell me how I’m doing something right or wrong. You don’t have my car. I’m glad you like it but it’s a piece of garbage, it’s generic and it’s badly made.

    • @05greedy28
      @05greedy28 11 дней назад

      @DSBsky77 I'm not sticking up for the product item at all I'm just saying I didn't have trouble. And as for length maybe they made it too short. But as far as the cares go their is no difference in the dash between mine and yours as the coupe and the saden share the same dash. Have a good new years

  • @petertrubek7497
    @petertrubek7497 13 дней назад

    Thank you so much for the video; it saved me a few unnecessary rounds with the dealer. As a test, I applied a roughly 1mm thick self-adhesive foam, and that alone solved the problem.

    • @DSBsky77
      @DSBsky77 12 дней назад

      @@petertrubek7497 awesome! I’m happy to hear that helped you.

  • @antonioarroteia6081
    @antonioarroteia6081 13 дней назад

    Almost alm the controls not working

    • @DSBsky77
      @DSBsky77 12 дней назад

      @@antonioarroteia6081 i’ve been trying to tell people not to buy this thing. Lol. I think it’s cheap. I think it has a lot of interface choices that are very counterintuitive. It’s not user-friendly and I really don’t recommend it.

  • @jshika
    @jshika 19 дней назад

    OMG This saved my ass! I've turned off all options in UEFI or mouse properties under control panel, but when I move the mouse 1mm my PC waked up instantly and it made me go nuts. I followed this video and worked. Thanks!

    • @DSBsky77
      @DSBsky77 12 дней назад

      @@jshika excellent! Glad to hear it helped you buddy. 😁

  • @juricamaric
    @juricamaric 25 дней назад

    Great info! I have made something similar. I did not glue anything on these arms, but I take off top glass from sunroof (6 bolts) and then I put some velcro tape on top teeths which push these wind deflector arms.

    • @DSBsky77
      @DSBsky77 25 дней назад

      @@juricamaric nice work, buddy. I guess Alpha Romeo likes keeping their customers on their toes. Lol

  • @tehcod6157
    @tehcod6157 27 дней назад

    anyone know how to do on a gigabyte board?

  • @novelmartinez6154
    @novelmartinez6154 Месяц назад

    Thank you so much for sharing! I will try this ASAP! I have the same machine and this damn trackpad is driving me crazy...

  • @markvonelend
    @markvonelend Месяц назад

    THANK! YOU!

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@markvonelend lol you’re welcome buddy.

  • @alexnewton3376
    @alexnewton3376 Месяц назад

    Everything worked for me on my X1 2019. All functions are working fine. I bought same unit from Aliexpress

  • @nexushexus4365
    @nexushexus4365 Месяц назад

    Amazing, dealership was useless. This is the fix.

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@nexushexus4365 awesome! Glad to hear it helped you. 🍻

  • @angrasband3564
    @angrasband3564 Месяц назад

    I run an ac unit tunneled into my pc on a 14900ks so I have no cooling problems at 1.45v, but I still have this problem with trying to run 6.2GHz without HT enabled and I have no clue why. Temps never go above 80, it makes no sense, I am so confused

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@angrasband3564 I bet it’s a very similar setting in your bios if you’re not using Asus.

    • @angrasband3564
      @angrasband3564 Месяц назад

      @ I am using asus, I tried all those settings. The only thing that helped me a little bit is the motherboard tdc limit setting it to unlimited, but I still get that throttling. Shit makes no sense, I just wanna benchmark my setup at 6.2GHz all p-core.

    • @DSBsky77
      @DSBsky77 Месяц назад

      @ are you using Intel extreme tuning utility? Did you set it to high-performance mode? I would try usingXTU, setting it to high performance mode with the power limits in settings and raising individual voltage limits until it goes away.

    • @angrasband3564
      @angrasband3564 Месяц назад

      @ I finally figured it out, and it’s so stupid. I had the “regulate frequency by above threshold” enabled, and even though the temperature came nowhere close to my limit of 115C, it would throttle it for no good reason. I got it fixed, so now it’s time to really test this chip with the AC tunnel >:)

    • @DSBsky77
      @DSBsky77 Месяц назад

      @ lol bios these days.. grats and good luck to you 🍻

  • @annonymous7112
    @annonymous7112 Месяц назад

    Can I use the wire of my old headphones to do that ? Could you make all the video of opening the laptop please ? I've never did it, I'm affraid to not know how to close it back...

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@annonymous7112 just make sure you use a solid wire. Not stranded. There are many videos around about how to open a laptop, and they are all the same. Don’t worry about it, it basically just clips together with some screws.

    • @annonymous7112
      @annonymous7112 Месяц назад

      @DSBsky77 Thank you ! I couldnt wait so I tested it, and it worked !! I took too much risk because all my thesis work is on this PC... Thank you again !

    • @DSBsky77
      @DSBsky77 Месяц назад

      @ you’re welcome, buddy, I’m glad it worked. I would definitely recommend backing up that thesis to a cloud source though. Lol

    • @annonymous7112
      @annonymous7112 Месяц назад

      @@DSBsky77 yeah... My defense is in 19 december, after that I will delete everything and forget it lol

    • @annonymous7112
      @annonymous7112 Месяц назад

      @@DSBsky77 please tell me, do you detect Wi-Fi 6E on your Omen ? I can detect 2Ghz and 5Ghz only. But not the 6Ghz. My phone (Google Pixel 7) detect the 6Ghz though

  • @kineticninja7989
    @kineticninja7989 Месяц назад

    this workaround doesnt work if you have a LCD AIO as it requires the L Connect Service in order to display the image you set in LC3. Such a dog shit software. Why can't I just save the GIF/IMG I want to use and not have to have a service running in the background? Genuinely regret buying this stupid AIO. Shoulda just went with my gut and bought the ASUS RYUJIN AIO instead.

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@kineticninja7989 sorry buddy but yea you said it. It’s dog shit software.. lol

  • @RETROBASIC
    @RETROBASIC Месяц назад

    Thanks a lot man you fixed my game. although another issue is the game only popping up on my monitor which is fixed with -vr launch command for the game on steam, if anyone sees this and needs help. 🎉❤

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@RETROBASIC you’re welcome buddy and also thank you for that info. 🍻

  • @Prof_SuggonDeeznutz
    @Prof_SuggonDeeznutz Месяц назад

    I think I'm having a seizure after watching your PC vomit rainbows. I do like your build I just not a fan of the RGB. 🤮🌈

  • @WilsonRosario198st
    @WilsonRosario198st Месяц назад

    I’ll give this a try , thanks for the video 💪

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@WilsonRosario198st you’re welcome buddy. Good luck. It should work. 🍻

    • @WilsonRosario198st
      @WilsonRosario198st Месяц назад

      @@DSBsky77tried it and it worked , thanks a lot loving it , did t know I can push these thing like this 😎, your a champ

    • @DSBsky77
      @DSBsky77 Месяц назад

      @ thank you very much man, I appreciate that a lot. Took quite a bit of time to get that tuned in. I hope you enjoy it buddy. 🍻

  • @Harineto
    @Harineto Месяц назад

    Amazing work mate. I'll do this for my 64GB kit and see how it goes.

    • @Harineto
      @Harineto Месяц назад

      I've got A-Die as well.

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@Harineto thanks buddy! I appreciate that. Took quite a bit of time to really nail this thing down and fine-tune every setting I could. Best of luck with it.

    • @Harineto
      @Harineto Месяц назад

      @ thank you man I appreciate you

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@Harineto Well I appreciate that so we're even lol. :D

  • @nauryu7
    @nauryu7 Месяц назад

    what wire did u use?

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@nauryu7 I used a thin, solid copper wire. I wouldn’t use a stranded copper wire because a little pieces can break off and the last thing you want inside of your laptop is a bunch of little pieces of copper wire floating around. Lol

  • @Harineto
    @Harineto Месяц назад

    I done this on apex encore with same kit works great.

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@Harineto apex should be able to use ddr5 8400 up to 8600. Not 64 GB however.. I like low latency though and 64gb. I just pushed this kit to 7000. I’ll upload a vid soon. Same CAS latency 30 though with tightened timings. 😁 More voltage though so it depends on your tolerance lol.

  • @Harineto
    @Harineto Месяц назад

    Awesome work. Thank you for this

  • @Styloco
    @Styloco 2 месяца назад

    haha, i get you on the 'good old days' comment. i remember fsb overclocking on my pentium 3 which was just 1 bar to slide up :)

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@Styloco right?! lol.. good luck doing that now lol.

  • @bartomiejsokoowski5786
    @bartomiejsokoowski5786 2 месяца назад

    How many do you need?

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@bartomiejsokoowski5786 like 300 more. Jk. Hell if I know lol

  • @austinbriggle3961
    @austinbriggle3961 2 месяца назад

    Im on a Legion 7i. My EDP limit was throttling me at 90w. I was able to fix it by bumping LP1 up to 130w now im getting 105w under load without hitting EDP throttle.

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@austinbriggle3961 That’s helpful to people who are using lower end processes for sure. But yeah, this is more to do with the kind of power required by something like a 14900 KS. There are bios limitations that if you don’t know what you’re doing, you will never stop it.

  • @davehall7754
    @davehall7754 2 месяца назад

    Where can I get this unit to buy

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@davehall7754 I got it off eBay, but I’ve told a lot of people that I wouldn’t recommend it. It doesn’t feel natural in the car. It’s clunky, unintuitive. The radio doesn’t work well, adjusting the temperature doesn’t work properly and the buttons don’t feel natural to push. There are a lot of missed design opportunities. The only thing good about this unit is that it looks neat. Everything else is bad.

  • @DSBsky77
    @DSBsky77 2 месяца назад

    I agree 100%. People can piss off. I do what I want with the shit that I buy. Lol. But as of right now, it doesn’t go over 95C in stress testing. You need to know how to set the limitations. If you don’t know how to do that, you shouldn’t be overclocking. All it takes is 10watts to flag a limit, doesn’t mean you should give it 1000 lol.

    • @angrasband3564
      @angrasband3564 Месяц назад

      Exactly, I tried asking on Reddit, but I just got flamed and told I’d degrade my chip in a couple months. My temps don’t go above 80c, so there’s not gonna be an issue. I just gotta figure out how to get rid of this limit so I can push it even more.

    • @DSBsky77
      @DSBsky77 Месяц назад

      @ yeah, Reddit is pretty notorious for that. I can post 100% factual information on Reddit and 9 out of 10 people will figure out someway that it’s wrong. 😂 Good luck with your overclocking brother.

  • @killerrf
    @killerrf 2 месяца назад

    Haha yea if you want to blow your own sh$t up people can piss off.

  • @yusufgerald3969
    @yusufgerald3969 2 месяца назад

    Is that case full of mineral oil?

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@yusufgerald3969 lol nope, lian li strimers removed from their frames and glued together. Using Prism RGB and Prism S controllers with Signal RGB.

  • @Derek2k
    @Derek2k 2 месяца назад

    Nice dude. That pc is amazing looking to me

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@Derek2k Thank you Derek. I wish you the best in all of your endeavors buddy. You deserve it.

  • @jonathand3842
    @jonathand3842 2 месяца назад

    didn't work but thanks anyway

    • @DSBsky77
      @DSBsky77 2 месяца назад

      that's odd...lol.. sorry buddy, I try.

    • @jonathand3842
      @jonathand3842 2 месяца назад

      @@DSBsky77 nvm it worked

    • @DSBsky77
      @DSBsky77 2 месяца назад

      lol sweet!

  • @sawit_b4u
    @sawit_b4u 2 месяца назад

    2024 guilia, minute cold, weather rattle vegins. Bought sealant lube first, doesn't work, you're the man! Thanks for share! Noting so many alfa gremlins too - making a must! Cheers 🍻

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@sawit_b4u great to hear it’s helping people out. I’m always happy to lend a hand when I can. You’re welcome. Have a great weekend, buddy.

    • @joebama6945
      @joebama6945 Месяц назад

      Can you let me know where you got the material to fix this . Thanks again

    • @DSBsky77
      @DSBsky77 Месяц назад

      @@joebama6945 I had some 4 Gauge power wire laying around. So I removed all the copper from inside it. Cut it long ways, took some epoxy and glued it there. Anything you can stick there would do the trick really, just jas to be rubber.

    • @joebama6945
      @joebama6945 Месяц назад

      Thanks

    • @DSBsky77
      @DSBsky77 Месяц назад

      @ you’re welcome.

  • @richiex123
    @richiex123 2 месяца назад

    What do you mean by does not work with jb4?

    • @DSBsky77
      @DSBsky77 2 месяца назад

      I mean it would not connect to the bluetooth for JB4. I had to use my iphone. Idk. Some kind of hardware limitation? My last display had no problem hooking up to my JB4 bluetooth.

    • @richiex123
      @richiex123 2 месяца назад

      @@DSBsky77 Thank you! How about the mic? Does it come with a mic or you can use the OEM.

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @ I honestly can’t remember but the Mic sucks so far. I probably don’t have it in a good position. I wish I could use the OEM instead. I’m not really sure which one is working right now the OEM or the one that comes with the unit. Lol

  • @plawso
    @plawso 2 месяца назад

    finally! this worked perfectly! only thing I would add is to unplug all of your other USB peripherals to figure out which one your mouse is

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@plawso very good idea buddy lol. Glad it helped you though. 😁👍🏻

  • @matthewenglander-enzen5930
    @matthewenglander-enzen5930 2 месяца назад

    hello do you have backup cam pluged into it if yes can u send me message with connections as myone is not appearing at all not even black screen :( when on revers bdw nice setup :d

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@matthewenglander-enzen5930 hello and yes, I do have a back up camera connected. You have to make sure that you swap out the harness with the one that comes with the new display. Follow the instructions carefully. I’m pretty sure that there is a green plug that is crucial or you will not get video. It’s been a long time since I connected this, so I’m not sure anymore lol. Also, there are settings in the display that you have to turn on to enable the OEM back up camera. “I think”

  • @ernest4175
    @ernest4175 2 месяца назад

    What type of wire did you used ? I don't want my laptop explose into my face haha

    • @DSBsky77
      @DSBsky77 2 месяца назад

      Small, single, solid copper wire. threaded wires have a tendency to break off in small pieces.

  • @GFClocked
    @GFClocked 2 месяца назад

    Oh thank fu#*ing god. Finally. I've disabled this in power profiles, even disabled it in bios!!! Yet it always wakes up, how that's possible is beyond me. This vid saved me 😂it was infuriating.

    • @DSBsky77
      @DSBsky77 2 месяца назад

      @@GFClocked lmao. It really is the little things that drive us mad. Glad to help buddy.

  • @apilomlunla127
    @apilomlunla127 3 месяца назад

    Hat off to you sir ! Work on my F32. Only costing me £3 instead of £450 !

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@apilomlunla127 excellent! Glad to hear it buddy. No way we should be paying for design flaws. 🍻

  • @MrCuz01
    @MrCuz01 3 месяца назад

    Has a body had any trouble with the setting. On the unit I have half the controls are not working.

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@MrCuz01 i’ve been repeatedly telling people not to get this unit as it is unreliable.

  • @markster1904
    @markster1904 3 месяца назад

    thanks so much man - i always had to turn off my wireless razer mouse before putting my PC to sleep, barely moving the mouse scares the PC wide awake lol

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@markster1904 you are very welcome, my friend. Yeah that’s the problem I was having as well. It was making me crazy. 😂

  • @Mounier777
    @Mounier777 3 месяца назад

    had this computer since it came out. I had the same issue and it was driving me mad. I went and ran 3 skinny wires from the track pad and screw. once I put everything back together and turn my computer on the trackpad works flawlessly

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@Mounier777 happy to hear that buddy. I can’t believe we have to do this kind of stuff but here we are. 😂

    • @Mounier777
      @Mounier777 3 месяца назад

      @@DSBsky77 💯 right. I love this laptop but my next laptop im considering is the Lenovo legion. my legiongtx 1660 ti no issues. and still works flawlessly

  • @GunmasterG9-l3g
    @GunmasterG9-l3g 3 месяца назад

    Hey bro any update how is it so far is it still working

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@GunmasterG9-l3g it’s still “working” kinda. It still has issues with temperature control. It’s either all the way hot or all the way cold. All the temperature settings in the middle have no effect.

    • @GunmasterG9-l3g
      @GunmasterG9-l3g 3 месяца назад

      @@DSBsky77 ah okok thanks for the update bro

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@GunmasterG9-l3g anytime buddy.

    • @TomulGodKiller
      @TomulGodKiller 3 месяца назад

      temperature control does not work properly, the air conditioning panel from ZF-5006 does not control the internal heater flaps.

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@TomulGodKiller I did not have that problem, but I had other problems with temperate Control, which is why I’m recommending to people not to get this.

  • @wilsonwebb107
    @wilsonwebb107 3 месяца назад

    Where to buy it ?

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@wilsonwebb107 I wouldn’t buy it.. trust me. It’s not great quality. My temperature settings don’t work right now. But the link is in the description if you insist.

  • @psyview4188
    @psyview4188 3 месяца назад

    Is it possible to put the cable somewhere where the mouseclick still can work?

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@psyview4188 yes. Just slide it in the other direction but also make sure the cable isn’t thick. And if you twist it, don’t have the twist under the metal.

  • @Dazen101
    @Dazen101 3 месяца назад

    Open the program once to change colors and now mine is doing this shit. I tried an older version and it's still not working. I'm throwing up my hands. My system will spin at 30% always. It keeps saying my CPU is at 100c when I know it's just hovering around 35 in bios.

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@Dazen101 yea… try signal rgb or another fan control software. Lian li is shit..

    • @Dazen101
      @Dazen101 3 месяца назад

      @@DSBsky77 I honestly think it just killed my pump. I'm floored.

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@Dazen101 dam… I really wouldn’t be surprised. Sorry man.

    • @Dazen101
      @Dazen101 3 месяца назад

      @@DSBsky77 Honestly, I'm so turned around. I don't know what to believe anymore lol. Gave it a day break out of frustration. Turn it on. It's idling around 40-50 now. Haven't tried gaming. Literally live commenting this. I'm going to feel silly if I just raged for no reason and bought a new AIO coming in like 2 days. All I know for sure is one of my fans bell bearings went bad for sure. Which isn't too bad since I have replacements. Right now I'm just puzzled and stumped lol

    • @DSBsky77
      @DSBsky77 3 месяца назад

      @@Dazen101 lol good luck man. Could be conflicting software?

  • @Kings_Gambit
    @Kings_Gambit 4 месяца назад

    Thank you for this. The wake-on-mouse has been making me crazy for so long. Who would've thought disabling wake-on-keyboard would fix it? I had 5 entries, one without the option, one that when ticked re-enabled wake on KB. But no more wake on mouse!

    • @DSBsky77
      @DSBsky77 4 месяца назад

      @@Kings_Gambit My pleasure. Always happy to help. 😁

  • @328iJones
    @328iJones 4 месяца назад

    Nice setup🔥🔥🔥

    • @DSBsky77
      @DSBsky77 4 месяца назад

      @@328iJones Thanks Chief 🍻

    • @328iJones
      @328iJones 4 месяца назад

      @@DSBsky77 I need it my factory cracked a couple days ago

  • @dylanktech
    @dylanktech 5 месяцев назад

    Great video! Do you have the option to change the boot screen animation on these headunits? If so which ones can you choose from?

    • @DSBsky77
      @DSBsky77 5 месяцев назад

      @@dylanktech Thank you very much. You can import some, but there are three defaults. The Earth from space, car headlights in the dark with a blue tint which I like and the car side profile with the word welcome under it. It’s in factory settings/boot logo. 🍻

    • @dylanktech
      @dylanktech 5 месяцев назад

      ​@@DSBsky77 Perfect, how's the visibility with the 12.3 inch screen? I'm debating between the 10.5 and the 12.3"

    • @DSBsky77
      @DSBsky77 5 месяцев назад

      @@dylanktech I have no issues with the visibility. I think it’s just fine.

  • @ulisesfloressoto5494
    @ulisesfloressoto5494 5 месяцев назад

    Thanks man, does somebody know how to fix the inner tail light without having to replace the bulb holder? Here in Mexico is hard to find the exact part.

    • @DSBsky77
      @DSBsky77 5 месяцев назад

      @@ulisesfloressoto5494 Your welcome. And if the harness melted out in the same way this one did, the fix should be virtually identical. But I’m sorry, I’ve never had to fix that one. Good luck, buddy.

  • @WarAnWaar
    @WarAnWaar 5 месяцев назад

    Well I can't see those..connect system off..

    • @DSBsky77
      @DSBsky77 5 месяцев назад

      @@WarAnWaar You have to be using the same version of L-Connect to see these things. But you could try using the newest version and see if that fixes it as well.