Видео

neat. ive used an 8.8" face mill with three of those on it to make meter long aluminum extrusion flat and parallel within 3 tenths

Thanks

You look like you're disgusted to even touch it

Certified Clickspring moment 🙏

For the sophisticated engineer that not only wishes to satisfy his significant other, but also himself.

A bit late to the party, but very cool, well done! Did you eventually complete your clock? Would be super interested to see it!

Thanks for this video, it is very helpful. I'm wondering if the Autorun Counter speed is dependent on the PC speed, since it seems there's no way to change any setting

Tx a lot for the video, helped me a lot There was one thing you forgot to tell. After downloading you have to replace the Programmer folder with the content of the downloaded file, just rename the old, and place the new Programmer folder :)

As a chinese person who can't read chinese this is a lifesaver

Does anybody know if ETRS PE 50mm lens aperture be adjusted without putting the lens on camera?

where did you find that 10mm dia. ball screw??

it seems you didnt tram the milling head, and are making a helical pulley. you can see in the shot with the belt wrapped around, how it exits the pulley higher up than it enters.

from what I've seen in very basic research ,carbon black is a better starting point for extraction just based on graphene being a ordered layer of carbon and carbon black being made in large quantities for tire dyeing. in home transmutation/chemistry is always interesting.

Very interesting! Have you done any machining with this spindle?

nice to see this finally come together. your first video way back when definitely opened my mind to the options aside from a vintage deckel or a modern knockoff

Could u make one of theses with lines or jipping around the part wear ur finger hits for better grip, how much would u charge for one thank you

this problem is related to EU / UK users since bluetti is not updating the firmware here like it does in the US.

You can identify as Clickspring if you made the tool that you used to make the tool that you used to make the part.

Hi Could you tell me please what does µAss mean?

give more details about edm circuit mosfet，please

update more detail thank you

Hi Jesse.....about the same time you videoed No, 1 I started a build as well having bought the tool swing mechanism on Ebay..........it's about 3/4 finished as I build slowly and although it's a bit different to your design eventually It'll get finished. One thing I have been noting from other grinder operators and that is the grinding dust id highly abrasive tungsten carbide and not recommended to breathe in the particles so be warned to have some vacuum method for dust extraction. I'm not using the Deckel type collets and have an ER32 chuck with a plain shank that I will add a front taper bush to allow it to fit in the work head......this is for milling cutters so a separate tool holder will be made to hold lathe tools in a square type of holder.

Thank you so much for posting this. Laughed hard and felt your pain in each step of the video. This company has huge potential but seems to fall short on their documentation and typos. On the Tang driver issues, they are using an emulator with the BL616 or similar to mimic the more expensive FTDI USB to JTAG / UART bridges. This forces the use of a different packaged device driver.

Try to make spwm. Can't test the code yet the nano didn't arrive yet

Whats the bearing part number?

Very cool ! I need to swap washers in mine they have pivot play and i would prefer brass washers anyways. I have to get the specialty bit for the pivot screw

How do you go about tuning your motor?

Yes, it is really difficult to find out which device to select in the Gowin IDE. A little tip: It is written directly on the FPGA chip. If you can read, you have a clear advantage.

Thanks for the video, really helpful while trying to figure out the gowin tooling!

Way to go, I am making similar and just took my dimensions from a local deckel clone machine, having a rigid base of granite is good, It also makes aligning the elements of the machine easy, I just bonded everything to the base with engineering adhesive and will bolt if necessary.

Did you learn at school or are you self-taught?

thanks for info . if you do anything else love to see it.

🦾🦾🦾

So how do you know which way the rearmost element goes. It seems awfully symmetrical and confusing! Any ideas?

Definitely not clickspring manual talent, but nice to see ;) .

I LOVE you for this!! Was losing my mind... 😅

Cool vid. Been using Gowin Designer for the last week and I can emphasize enough how efficient, as in lightspeed, easy and tidy it is compared to all others I've struggled day & night with. No affiliation but I have to give Gowin Designer and their oscope a second-to-none top ranking (sorry vivadoo, grutus & latty crapiance corps). MEGA GOWINNER.

Have a look into esp_netif and Arduino handling of DHCP server for the USB NCM interface on the ESP32. The ESP32 bridge can be a DHCP server which provides Linux with an IP as soon as it boots. Ensure it doesn't provide a DNS or GW address so it doesn't mess with Linux routing. Saves hassle configuring it on the host

I just found your channel. I started on the edm video.. I went and looked for more but I've watcher a few other video of yours, glad to see you are still posting new content!

The problem is with how you’ve got your solar panel. It needs direct sunlight. More amps.

Wish we all used metric. Nicely done

Gotta give her a good wipe down before hitting record, click spring’s shop is somehow just spotless. I could never do the math to figure out teeth so good on you though

Hello, Thx for the video! Any chance of buying a few thumb screws? Do you have a spanner tool that holds the cutter together? Thank you.

Thanks for trying. Could the lack of mechanical stiffness be the cause of the tip chipping and the pattern ?

I did a similar project on a taig lathe with a consew motor but the problem for me was the brake in the motor causing the chuck t spin off the lathe.

Как чисто !!

How much of a step over per pass

Hm... have never heard these FPGAs. This IDE does look so complicated as Lattice soft for example. Thanx man. Is so few understandable FPGA-topics, so your one will be quite helpful

Just found your channel and Subscribed. Very nice video. Thanks

Here's an abstract based on the transcript, focusing on the process and issues the speaker faced (generated with Gemini Advanced): *Abstract* This transcript documents the challenges and solutions in programming a Tang Nano 9k FPGA using the Gowin development environment. The speaker focuses on pin mappings, configuration files, and using the Gowin Analyzer Oscilloscope (GAO). Specific pain points include deciphering device names, the limitations of Verilog syntax within the IDE, and the necessity of a separate programmer application to utilize the GAO. Despite Chinese-language documentation and limited community support, the speaker demonstrates how to implement a simple counter circuit on the FPGA and visualize its output with the GAO.