Видео

If you are having issues with your Dexter Dryer or get the error code COMM ERROR 2 and can't get it to work, it may need a soft reset. The dryer does need to be powered on to perform this task. Also, make sure you are comfortable working on the internal electrical components of the dry prior to performing this task. Please note: This process may erase settings from the dryer and they will need ...

If your water valve is not flowing or is not opening, your diaphragms may be damaged and need to be replaced. This video will show you how to replace the worn diaphragms.

After replacing a Variable frequency drive on your Dexter Washer, you may be presented with the error DRIVE ERROR 1. This is completely normal, and the drive type must be set for the control to see the drive. The drive types vary based on the equipment type. A-Series being upgraded to a C-series = DRIVE TABLE 1 C-Series board replacement = DRIVE TABLE 2 C-Series with newer MS300 drive = DRIVE T...

This video will show you how to re install your belts on a Dexter dryer.

This video short shows you how to rotate the gasket to attempt to stop a leak on your Dexter washer.

If your water is too low on your new Dexter coin washer compared to your older models, this setting may be the answer. Dexter washers ship from the factory in the "ECO" mode to use less water but you can put the machine in "Classic" mode to match your older machines.

This Short will show you the proper way to remove the Tumbler belt on your Dexter dryer.

When you are having connection issues and find that your Dexter Live system is not coming back online. This is the sequence to reboot your equipment to get your Dexter Live system back up and running.

If you have and issue with your Dexter washer not spinning out clothes, not filling the tub or not advancing the cycle, you may have an issue with your pressure tube being clogged. The LED's on the electronic pressure switch will inform you on the status of the pressure tube at the bottom of the tub.

This Video will show you how to rotate the glass on your Dexter washer and also basic maintenance on your Dexter washer door gaskets

How to "Soft Reset" a Dexter O-Series Washer or Dryer with the O-Series Controls. Warning! this may erase any settings your injection chemical company may have set or any settings you may have set. You may want to back up your settings prior to performing.

This video shows you how to diagnose a faulty safety circuit part when your Dexter dryer is not igniting but the drum is turning.

How to perform a soft reset on your Dexter washer when replacing controls or VFD.

This video will show you how to reset the Excessive Vibration error on your Dexter Soft Mount Washer. This issue can happen if you have a load that is unbalanced and trips the Excessive vibration sensor. This can also happen during shipping and will need to be reset.

Dexter Washer Confirming Electrical Taps On Transformer