Видео

@@ohwhoaitzjoe the rim brake frame has been discontinued. I believe the last batch were made around mid 2021. The ones you see online are the disc frames. Those are available with external or internal routing.

@@cunovonhahn6454 I used the spacers that came with the handlebar. I did notice that unlike most manufacturers there's no guide pins or slots to seat the spacers. I haven't built up the bike yet, most likely going with Black Inc bar stem when I get to it. Assuming the steerer was cut 3-5mm below the top cap you might have to tighten up the preload.

@@eddievanich thank you! Really appreciate it. I have found this video / ruclips.net/user/shorts5EfdKnOxFD4 / I have the same problem with the bmc slr02. The problem is, that the internal cable routing is needed. There is a BMC / Alanera Spacer adapater available. I will try that. I think this should work. I will come back to you.

It comes preassembled

@@eddievanich so all I’d have to put together is front wheel, seat post, etc…?

@@eddievanichalso how do you like it? I’m thinking of buying one and eventually just upgrading the wheel set

Why would it be too big frame. It dependant on the rider's height man. If he is over 183 or 185cm and the frame is 57-58 its absolutely his size. Altough, he didn't mention any measurements so its kinda irrelevant.

I have a set on my odyssey and they are very quiet on the highway.

Have you fitted this tyre? How tyre performs?

No final build weight what a silly video.

@@msj0676 i actually liked the detailed look at the frame but yeah why bother weighing it in that condition? either frame only or complete build.

roughly a pig

I believe it's the Gan which they renamed I think to the Pinarello X series of bikes

@@Millicente thanks

paris?

yes, comes with setup for both

Headset bearings, top cover, spacers for use with previous-gen Tarmac SL7 stem or the newest Roval one-piece cockpit.

Are you still looking to buy? I got metron 5d acr 40cm in 100mm and 120mm

nah, ended up getting the SL7 Expert in gloss morning mist / white colourway, in 52 cm size.

It was taped there to measure max saddle height

Both FSA SMR and Metron ACR come with spacers but does not include top cover. You need this part www.fsaproshop.com/products/acr-headset-top-cover Another thing, the locating pins on this particular FSA top cover sits at 9 to 3 o'clock position. The Allez headset split-ring holes are located at 5 and 7 o'clcok position. I used an electric hot knife to remove the pins then mixed two-part epoxy to glue them to align correctly. Also, you need something like a Dremel to widen the bottom front section to free up the hydraulic hoses. Without this modification it will pinch and possibly rip later.

You're right, the round ones which are 7x7 is supplied with this frameset. The carbon 7x9 are sold separately. I think it's low key dissing on a customer like "if you can't afford an SL7 then you're probably not going get a carbon saddle so you don't need it"

I might go with something like FFWD Ryot 55 tubular wheels to get the weight under 8kg

Thank you 😊

Color is aluminum color run with satin logos

Tubular yes, they don't expand out that much. Clincher or tubeless no. I had a pair of mavic ksyrium pro carbon ust with yksion pro ust 28mm tubeless. I didn't even air it up the clearance was about 2mm it would definitely rub aired.