- Видео 11
- Просмотров 46 044
Joe Lee
Добавлен 13 авг 2015
Tools, DIY car repair, Home-made things
자가정비, 공구, 각종 생활용품 자가수리
자가정비, 공구, 각종 생활용품 자가수리
Veracruz folding side mirror lack of power
lack of power RH side view mirror of Hyundai Veracruz ix55
internal gear replaced but failed
relubricated the gears but failed
motor replaced but failed
finally the swivel shaft cleaned and lubricated then it solved
internal gear replaced but failed
relubricated the gears but failed
motor replaced but failed
finally the swivel shaft cleaned and lubricated then it solved
Просмотров: 54
Видео
Disassemble side view mirror Hyundai Veracruz ix55 베라크루즈 사이드미러 분해
Просмотров 310Месяц назад
Check your side view mirror for folding/unfolding movement. 1 put your finger gently on the mirror while it is folding. If it stops, it means the motor might be weak. 2 side view mirror stops in the middle of folding with noise, it might be the gear inside. you can buy a motor/gear box assembly in AliExpress. you can buy an OEM new sideview mirror assembly but it needs painting.
Hyundai Veracruz diesel Fuel filter change ix55 CRDi 베라크루즈 연료필터 교체
Просмотров 6 тыс.5 лет назад
Hyundai 2014 Veracruz CRDi ix55 diesel D6EB 3.0 S2 diesel fuel filter change at every 50k km
Hyundai Veracruz diesel Powersteering fluid change ix55 CRDi 베라크루즈 파워오일 교체
Просмотров 3,3 тыс.5 лет назад
Hyundai 2014 Veracruz CRDi ix55 diesel D6EB 3.0 S2 Flush powersteering system with 2L new fluid at every 50k km Change powersteering reservoir at every 100k km
Hyundai Veracruz diesel oil filter housing leak ix55 CRDi 베라크루즈 오일필터하우징 누유
Просмотров 11 тыс.5 лет назад
Hyundai 2014 Veracruz CRDi ix55 diesel D6EB 3.0 S2 Oil leak of oil filter housing into engine block.
Hyundai Veracruz diesel Belt tensioner replacement ix55 CRDi 베라크루즈 벨트텐셔너 교체
Просмотров 13 тыс.5 лет назад
Hyundai 2014 Veracruz CRDi ix55 diesel D6EB 3.0 S2 Belt tensioner and belt replacement 벨트와 텐셔너 교체 Belt tensioner @ every 50k km, Belt @ every 100k km
Torque wrench basics 토크렌치 기본 사용법
Просмотров 1,9 тыс.6 лет назад
Accuracy : Torque screwdrivers in this video ±6% Torque wrenchs in this video ±3%
Tool case for field service 출장공구가방 툴케이스
Просмотров 2,9 тыс.6 лет назад
I use this tool case for laboratory equipment service. 공구가방과 공구모음소개 입니다.
와.. 저는 이제 17만인데 와…
Dpf관리는 어떻게하나요
출고DPF 아직 달려있습니다 고속위주고 여름 250~300 겨울 350~400 마다 재생됩니다 재생은 배기온도를 모니터링하고있습니다 LED레벨메타를 달아뒀어요
완전베라계에 찐레전드 내차도 70만더타서 80만? 언제가냐 ㅎㅎ 대단합니다 역시베라굿
넵넵 현재 진행형입니다 오늘도 달리고 내일도 달리고... 내년말 90만되면 한번더 소식 올리겠습니다
어떻게 타면 1년에 8만 가까이 주행을 하시는건지, 산술적으로 하루에만 200킬로를 넘게 달려야 하는데
돈벌로 다니면 하루 1000키로도 달리죠ㅎㅎ 출장이 많으니 그렇습니다
저도 베라를타지만 이차에 매력은 타본사람만 아느늣
옙 진득한 매력이 좋습니다 특히나 승용차 평균주행거리로 1위한 차량에 걸맞게 내구성이 특출나네요 폐차시 평균 30만키로를 달린다고 뉴스기사가 나와있네요
베라 신형인데 왜렇게 많이 탓슈?관리방법좀 부탁 합니다...전 2013년식인데도138000
넵 출장 일하러다니느라 많이 탔네요 상세정보는 네이버블로그 찾아주세요 m.blog.naver.com/okju_lee
역시 베라 아잉교
차가 두툼하구만
Is there a filter in reservoir? It need to be cleaned?
@@matusstankovic3245 yes there is a fine mesh filter. you can use a spray cleaner. but I think particles got already stuck. it is necessary to protect the expense steering main parts.
82만키로라니 놀라워요!!! 관리 정말👍👍👍
Good morning, first of all thank you for your videos! I would like to know I have an ix55 3.0 crdi, year 2009, 230,000km on the clock, I have a starting problem but only when it's cold, only the first start of the day, I have good knowledge of mechanics, I So I checked the heater plugs, they are ok, I changed the complete diesel filter unit, but nothing works..., it looks like it is defusing the diesel circuit, I don't really know... . Is there a known fault with these symptoms on the ix55? thanks in advance
hi there many 1st gen diesel engine owners have common and frequent srarting probem because of the faulty glowplug controller. indivudual glow plug controller from Beru. Glow plugs, controller, and cable are changed. You can see the fault code with a scan tool if uncertain. Thats a common issue in winter time. good luck.
@@joelee918 Thank you very much for your response, I will look into that
MUY MUY UTIL... MUCHAS GRACIAS
Hello, May I ask how can I order the same parts for my car + intake manifold cooler from Korea? Thanks in advance
I am sorry. I also dont know how you can order parts overseas. but one thing sure is that replacement of oring could help the leak in some cases.
Thanks a lot for your answer. I think I have the same problem, plus oil leak from the intake manifold cooler near the sensor.
@@gortaur1000 yes intake upper manifold with the boost pressure sensor. This manifold is likely to have a leak around the bolt near the sensor. The manifold assy' has to be replaced because it isn't that much expensive.
very good video! I want to buy a Veracruz (or in Germany ix55)and my question is, where I can find a repair manual ? Could you help me please Thank you so much
Hi I have an English service manual file. but only for gasoline engine gen 1. please leave an email address here so that I can send you the files.
Thank you for making this video. It helped me identify the part I needed before ordering.
I am glad it helped.
What is the number OEM of this part please ?
It is 252813A100 TENSIONER ASSY.
Thanks a lot for english explanation. I can't understand one word in korean.
no problem. I am glad it helped.
베펨에 활동이 장기간 없으셔셔 궁금해서 들어와 봤네요 살아계시지요?^^
안녕하세요 요새 차에 좀 관심이 덜해져서 카페에는 들어가서 글은 보는데 유령처럼 지내네요^^ 잘지내고 있습니다 감사합니다
제차는 모하비 이지만 같은 엔진이기에 유심히 지켜봤습니다. 영어 공부 하시는 가요?
영어를 좀 생활화 하고싶은마음에 몇편 찍었어요
누구인가 했더니 슬로우 님이시네요 ^^ 반갑습니다
네 반갑습니다 예전에 영상 몇건 재미로 올렸었죠
Great case good set up love the German hand tools genuinely superb quality
When I first saw the toolcase used by a piano tuner, I loved it. then I set it up for my own use. Thank you very much.
1분9초쯤 전선벗기는 공구 이름좀 알수잇을까요
Weidmuller Stripax 입니다
Helo Ai need help
소리가 나서 저도 작업을 해야 되는데 정말 좋은 자료 공유 감사드립니다. 저도 토크나온 그림 공유 부탁드립니다. leebu2k@gmail.com 입니다. 감사합니다.
예 보낼게요
06년식 베라오너 입니다 30만이 넘었구요 엔진오일뚜껑을 열면 흰연기가 뽈뽈 올라오구 오일이 확실히 빨리 없어집니다 !!혹 좋은 방법 또는 수리를 해야 하는걸까요 ??
블로바이가스가 많으면 인젝터를 점검하더군요 인젝터 동와셔로 인한 블로바이가스 증가및 오일필터하우징누유등이요
ruclips.net/video/Y71heLRGsqM/видео.html
What do you repair or install .
I repair food analyzers. for lab and factory quality control dept.
Thanks for showing us your nice collection. I think I might have the same 1/4 drive Tohnichi torque wrench that you have. I love that little guy. I see Gedore, Wera, Tohnichi, Fluke, Shinwa, Tone, Ko-ken, Hazet, PB Swiss, and Milwaukee. That Tohnichi catalogue is HUGE!
Thank you for the nice comment. You are also very interested in hand tools. I fix laboratory machines for a living and maintain cars at home as a hobby. It's so much fun to have time with well made hand tools.
제차도 베라크루즈입니다. 보고계시는 벨트 도면은 어디에서 구할수 있습니까? My car is also Veracruz. Where can I get the belt drawings you are looking at?
S엔진 다이어그램에서 벨트부위를 확대한후에 제가 넘버를 넣었어요.이메일을 남기시면 보내드릴수 있고요.
@@joelee918 네 감사합니다. 이메일 부탁드립니다. jungyul@chol.com
Hi what size of hose barb splicer you using ?
it is 16mm. thanks for the correct term.
Hi , anyone know what type of power steering fluid is compatible for Hyundai Veracruz , I hear Hyundai just use regular power steering fluid .
It's PSF-3 for all models. G3.8 D3.0.You may google Hyundai/Kia PSF-3 alternative or equivalent.I use Hyundai 03100 00110 New PSF-3 1L.
if you are interested, I can send you the service manual English HTML for G3.8. You can see many useful things there in the manual.
Joe Lee after google t online I found out Hyundai using Valvoline power steering fluid , just regular power steering fluid wil be fine
@@thehegt Good
베라크루즈자가정비 잘보고 있어요 연료펌프스위치 인상적입니다
감사합니다. 재미로 하고있어요~
이츠베터투익스플레인인코리앙! ㅋㅋㅋ
영어로 한번 해보는게 제게 좀 도움이돼서요~
nice video~ very helpful~! could you me give the size(OD) of a brass connector?
Connector 16ATube 10/14 PVC
잘 봤어요 추천~
감사합니다.
잘 보고 있습니다. 감사합니다.
네 취미로좀 해보고있어요
Great video, thank you
Thank you.
Can I do without jacking the car up
no I don't think so. If you don't want to raise your car, why don't you try to do the dilution method with a turkey baster. Many guys do it. and it's much easier.
Joe Lee hi , if I do it with the turkey Baster how many time do I have to suck the reservoir empty and refill it ?
I think 2 liter would be good. You may check the liquid color.The reservoir has a mesh filter inside. I also change this at every 100k km.
슬로우님 구독합니다 누유 잡히길 바랍니다^^
저도 해결이 되었길 바라고요 한 몇개월 지겨봐야될것 같습니다. 구독 감사합니다~
Cool
anytime
@@joelee918 hello Joe, can we get in a contact via e mail? I am also owner of ix55 diesel. Thanks
@@matusstankovic3245 yes any time please send an email (okju_lee@naver.com) have a good day.
Really good tool box and tools I have also got parat tool case with knipex and gedore tools I always buy german because the quality and reliability is way beyond excellent.
Hi, thanks for the comment. Yes German tools are reliable. I would like to collect some old ones like from W.Germany.
@@joelee918 west german tools are available in the UK but they are second hand I'd doesn't matter because they are built to last a lifetime
@@tanveerkhan9221 no it doesnt matter at all. I have some old W.Germany socket wrenchs and spanners. They are like 40~50years old, but still amazing. better material and robust design. maybe no cost reduction at that time.