Видео

damn, Thank you. I was losing my mind LOL

Thanks My 3 nest products did not connect on my new modem. My solution was to disconnect all 3 devices on nest app. I removed battery from CO monitor thinking it may want to network with the two cameras. Reinstalled the two cameras first, thankfully the QR codes were on the devices. Did a factory reset on CO monitor and did it last. All working now.

Welp. After 3 years. I needed your video. The “assisting product” was the issue. I couldn’t figure out which one was and it wasn’t until I had all products on the kitchen table did it work. Thanks for the video.

This doesn't work, because I can't even get one to connect. I gave up on this a long time ago and decoded to try again today. I'm lost

Cheap shirts. not worth it. I was not impressed when I inspected them. Feel how light weight it is, and the cheap collar stretches looking terrible. The shirt should be selling for $9.99 Not $27. I picked up a Sublime shirt from Wal-Mart. You know how many colors are on those shirts. It's thicker & fits better. It was $9.99

Everything was great until Google got involved. Thanks for you patience and willing to help others.

I only have 2 nest protects and when take the batteries out of the main one, the app still looks for it. So I can't get passed out to install my second one. What do I do?

I actually just bought one of these at Goodwill, used of course. It had enough toner to try it out. Works great, so I ordered toner for replacements. I wanted a laser printer because I'm tired of ink drying out from not being used often enough at home and the battle just to print a page. I feel like I hit the lottery.. purchased printer for $20. Not really sure why the owner donated it, it's a great printer!

scp

How do you set this printer up so that you can scan documents to your computer?

I replaced my router. I reset one nest protect The app tried to find and connect to one of the other nest protects. But this was pointless because they all had the wrong WiFi information. I deleted all protects from my account. Added reset nest protect. This time it asked for WIFI information. It connected just fine this time.

Good to know. Thank you.

I really liked your solution because it was different than everything else I've seen. I too have spent hours on this. I've tried at least 25 times! In my case, I'm not dealing with a new product, but an old product that was misbehaving, so I erased its data and have tried to add it back to my account. Unfortunately, even with some tweaks, your solution didn't work for me. After the first fail, I tried removing the batteries in the assisting product and reinstalling them. After the second fail, I tried removing and reinstalling the batteries in the unit I'm trying to add, but all to no avail.

I have a question about this printer. Can you print labels or other smaller things with this printer? I saw that it has two paper trays but which sizes does the second paper tray support?

I’ve got a similar problem but not exactly. Upgraded my router and now it’s lost all connection with the Nest Protects. Managed to connect the Nest thermostat easy peasy as you just had to select the wifi and input the password but these have flummoxed me! Who on earth would design them like this? Using the app they just don’t connect or pick up anything (as they’re obviously looking for the old signal) but there’s no where to change or select anything else. Does anyone have any ideas? Please get in touch if you do. I’m thinking I might have to take them all down and start again but that seems crazy and with 3 on 13 foot ceilings not easy. My search goes on ……

These nest protects are a piece of shit junk. Bought 3 (battery) a week ago and none would connect despite pulling batteries and performing factory resets. Returned them to Amazon. Never again. Fck Google and their shitty products.

I FUCKING HATE NEST PROTECT. FUCK NEST FOR THIS BULLSHIT THAT DOESNT WORK.

So I have been wrestling with almost the same problem. I had a power outage and 3 of my 6 Generation 2 Nest Protects went offline. I tried everything like you did numerous times. Then I found your post and tried unplugging 2 of the Nest Protects ones still online. That didn’t help. Then I unplugged my Nest Thermostat and tried again. After a few times it worked. Got all my Nest Protects back online. Thanks so much. I was giving up hope and almost ready to purchase new ones.

Hi, what if you don't have the blue tab?

Sorry but, I watch your video over and over again and I can't understand what you did to solve it. I don't understand which of the generations you have in your hand when you show them and I don't understand which one you pull the batteries from and which one you try to connect when it finally works out. I'm not stupid, I just don't understand. The frustration is indeed enormous because I just bought a protector (without having any other connected in my house) and I can't connect it to my Wi-Fi!!

I got the first gen and there is no way to connect it to the wifi.

Jason, Thanks for putting together this video. I have spent an entire day trying to figure out why my 2 old and 1 brand new Nest Protect devices were not connecting to the Nest app. Actually, 2 of the old one lost connection a long time ago. After watching your video , I followed and all clicked. I started from scratch and reset to all 3 devices to factory default settings and add one by one . All 3 Nest Protect detectors are now connected to the Nest App. My next step is to figure out how to connect to Google Home App. Thanks you so much for your help

Thank you so mucha it was a success conectiong my laser printer. I appreciate your tutorial. thank you

Suggestion: Instead of just raising your various alarms and dropping them out of view, just set up your camera to record from a longer vantage point. l That way, we can continue to see the products in question etc.

Great video. Fyi, your sound recording is clear and audible, but I had to maximise my computer volume and YT volume just to bring it to a low volume. You may wish to record at a higher volume.

Perfect, first time! You walked me through it and I just copied what you did and it’s up and running!!! Thank you!!!!

I am just going to add my experience here - this video was very helpful but if you have reset all protects - it will not be able to find a companion protect to connect with. I could not use the scanning of QR code to connect the first unit - but eventually instead tried manually entering the code into the app and it works straight away. It then connected to a thermostat I had instead.

And Still after 2 years from your original video - your advice is still helping people keep their sanity! Thank you for this information. I spent far too long to try and get my nest protects to link to my new wifi address…I had not taken into account the second nest protect would be interfering. Sorted them both out pronto after seeing this video. THANK YOU !

Hello, Do you have an update video?

my gen 2 is a few years old. It disconnected itself from my wifi. I factory-reset it and tried to readd to the network. It will connect to my other protect (gen 2), but it CANNOT add to my wifi, even though it can see it. Nest is sending me a new one.

Thanks for the Vid, looks like you have the solution but you know what? I’m not going to spend any more time on the three new SDs I just purchased from Amazon; they’re going straight back. If they are going to fully automate this process then they need to have clear troubleshooting out there for problems like this. This experience has destroyed the credibility of the product for me. I’ll look elsewhere.

Hi Jason, thanks for making this video to explain the issue. You have saved my almost $175 Canadian. My basement Nest protect dropped from the network. I tried everything possible to rejoin the network but no luck. I was thinking that I would need new unit since wifi was not working. Luckily, I found your video and did exactly as you explained. I was able to connect it back in two minutes. Thank you so much.

Thanks, nice review. The difference between HP CDW and FDW: Both models fax, scan, copy, and print. Function and features are the same. The true difference is where the printers can be purchased from, with FDW being available direct from HP and CDW coming from club stores, such as Costco.

What if I can’t even get one connected?

On the costco review 2023 - 178 gave it 1 star. I have a black version of this in my office. So far everything looks great in this 2 year review. Gonna hit that buy button for costco.

Thank you. I did not have to remove the batteries. I just pushed down the center button for 10 to15 seconds so the device can factory reset and it worked. You will have to factory reset all of them.

For me when printing photo's on it, it seems a bit more on the blue-ish/cold side, is there a way to print photo's a bit warmer in color?

Does this printer prints borderless?

THX! ❤❤❤❤❤❤

Hello, My M283cdw seems to be much slower than when I purchased it two years ago. Any suggestions for speeding it up.. or resetting to factory settings in hopes of "clearing" whatever the problem may be? A multipage doc (4-10 pages) double sided takes about 5 minutes. These are not color intensive or picture laden pages.. just documents.

Wow! Awesome real video! Costco is selling it today (Tues 04/25/2023) for $489.78 (not including state sales tax). Amazing how the same techology increases in price exponential! There's also a M283fdw model. I'll have to see what's the difference other than "c" comes before "f" in the alphabet. Kudos on the video!

Did you review what you said? You’re rather unclear.

WHAAAAAAAATTTT???? I CAN'T HEAR YOU!

What a nice authentic and organic test + unboxing, finally no BS and everyone can see this toy weighs a ton 😄

Dúplex?

Thanks! Good review!

Hi, do you know the difference between cdw & fdw? I know M283fdw has got fax, which I don't need and it's about 500$ here in Italy... 😓

How can you delete the home from the app whe you have to Manny???

Thanks for making this video, I just got one of these (slightly different model I think but same thing) - have used it in the past at a previous office type job, and they had some issues with one of the toner drums, but once they were able to get it cleaned it worked fine after that. I'm amazed at the textual reviews I've seen for this printer, most of which are basically "works great, does the job, does it fast, good quality." but there's a handful that are people complaining that they couldn't figure out how to set it up... I don't understand what issues someone would run into. You literally turned it on, and immediately made a photocopy, and then connected it to wifi and immediately printed some stuff. Some of those reviews make it sound like it's rocket science and they had to hire people to help them figure out how to get the printer to update its firmware... Some people, man.

Thanks bud you helped a lot !!!😅