Видео

Yes it is very fast.

Hi. The 3400 max is 360 dpi x 180 dpi, while the C4000 max quality is 1200 x 1200

Thanks for your comment!

Thank you sir!

Hi Monica. Technically, there are some clear inkjet receptive label materials available but they are not common. We have not had anyone use them yet because of the inkjet coating, they are a bit cloudy and not crystal clear. That is, they don't look that great 😕

Ha! You're going to have one of every printer soon Jason.

@@NeumannMarkingSolutions Then i could be come techsupport and a helper :)

Where are you located? You can find EBS contact here. They will connect you with the closest dealer to you. ebs-inkjet.de/en/contact/

No, I don't believe it can. It must use Inkjet Receptive material on rolls or fan folded so it does not do sheet fed materials.

Hi. At this time, no it cannot. The interfaces are Ethernet 1000-T/100-TX/10-T, USB 2.0 and the Operating Systemsare Windows 10, 8.1, 8, 7 SP1; Windows Vista® SP2; Windows Server® 2019, 2016, 2012 R2, 2012, 2008 R2, 2008; macOS® 10.6.8 or later; Linux

Hi. You can find dealers in India here. www.epson.co.in/lp-dealers

Hi Jeremy. Yes, you should be able to do Full Bleed/borderless printing. I'm not sure if the steps are exactly the same but this video might help you....ruclips.net/video/EfMut4JCiYo/видео.html

Hi. I'm not sure exactly what your issue is. You will be best to contact the dealer you bought from, or the manufacturer of the printer and/or software that you are using.

It has been quite a while since that message was created but I believe it was just the standard Font name: Font_7x5. It makes the font 7 pixels high which is about 1/2".

Hi Abdul. You can see our prices in Canadian dollars here...shop.neumannmarking.com/collections/ebs

Where are you located Abdul? You will have to find a dealer near you to purchase them...contact EBS here ebs-inkjet.de/en/contact/

Yeah, Epson is really good for small margins and little waste.

For the Linkware Live, yes, I believe you do.

Sorry, no, not at this time.

Hi Jason! You bet. We look forward to seeing your PX videos. We love your demos sir.

Sorry to hear that. Can you get help from the dealer that you purchased it from? Where are you located?

Apparently, yes there is inkjet material that is clear, though we do not have anyone using it because it is not crystal clear and it has a somewhat cloudy look.

Hi. You will have to find an EBS dealer near you. ebs-inkjet.de/contact/

Hi. I'm not sure what you mean by greaseproof material, but there are synthetic Inkjet labels for chemical resistance. You will have to contact your local label supplier for more info. Where are you located?

There are many variables to what could be happening. You will have to call your local dealer where you purchased or EPSON Colorworks tech support directly. Where are you located?

Hi Hector. The costs will vary depending on your location. You can see our price in Canada at our store here: shop.neumannmarking.com/collections/epson-colorworks

Hi. I'm not sure I understand your question. If you mean Satin finish labels, then, probably yes. We don't offer them buy you can ask your local label supplier and make sure to ask for Inkjet Coated labels for the Colorworks label printer.

Hi. Yes, it can print basic low resolution logos. Remember, it is Dot Matrix print and there is a max of 32 jets (dots) high. You can see a few logo videos here: ruclips.net/video/PDcHCxTqT5Q/видео.htmlsi=vehebBd6opLxry5x ruclips.net/video/zfZ8n-rWLFc/видео.htmlsi=ll3x7bvgzr4go9t_ ruclips.net/video/H17PJumDduA/видео.htmlsi=OlpketMUjTvd60hB Price will depend on your location, here are our prices in Canada shop.neumannmarking.com/collections/ebs

The ink usage depends on the factors of design, colors and size. Each label will be different. You will have to have your local dealer do an ink calculation for you, for each of your label pdf files.

You will have to find your local TSC tech support person in your area. This is the North America link but you can choose your closest area and contact them usca.tscprinters.com/en

Yes, you can. Please watch this video and tell us if it helps you. It is for the C6000 but it will be the same idea. ruclips.net/video/UJ9y7xj8IP0/видео.htmlsi=TAAC6SCmyKRqaSMo

Just go with the PX900 and you won't be disappointed!

Yes, custom sized die cut labels can be done. Gold or Silver labels may be possible but they will be uncommon and probably expensive as the label material must have inkjet receptive coating. You will be best to speak to your local CW dealer and label supplier. Where are you located?

Hope this video helped.

You will have to find a local dealer for Colorworks products and inkjet labels. Where are you located? Here are our prices in Canada shop.neumannmarking.com/collections/epson-colorworks

Well, there is an ink calculation tool we use and the label size, ink coverage amounts will vary depending on each label. To give you an idea of costs in Canada and current US exchange rate (1.37), the East Coast label ink estimates per label are about $.06 CAD ($.044 USD) 4"x3", the 2" round, black cheese label $.06 CAD ($.044 USD) and the multi colored, heavy coverage Gin label is about $.159 CAD ($.12 USD)...

Hi. I'm not familiar with Hot Folder. Most people just save the design in a pdf and print from Adobe Acrobat. The label printer just has a driver like any other printer but you have to create a specific "Media Definition" for each label, which might cause an issue in personalized printing..maybe this tutorial can help you more ruclips.net/video/a2qc_G7dBFs/видео.html

You will have to find an EBS dealer in your area. Where are you located? Here are our current prices in Canada. shop.neumannmarking.com/collections/ebs

Hi Kevin. I found this video which may help you ruclips.net/video/ooJv5DJRtEQ/видео.html. If not, contact TSC tech support who are great - usca.tscprinters.com/en/technical-support

mooly nirdhaaran ke lie aapako apane kshetr mein ek deelar dhoondhana hoga. mainne googal anuvaad ka istemaal kiya. ebs-inkjet.de/en/contact/ www.reiner.de/

1+ i would like to know

Yes, typically the ink dries very quickly. Some inkjet receptiove materials may very, so be sure not to buy a lot of labels until you are happy with the material. If you follow the recommendations, yes, you will be able to print 5-10/year.

@@NeumannMarkingSolutions how about the ink cartridges ? Does it dry quickly?

Hi, thanks for the question. From our tech, "adjusting the color is simple but may take some time to tweak. On the main Printing Preferences page, the right side of the page underneath the label preview, there is a Color Correction tab. The Color Correction will allow you to adjust the Brightness, Contrast and Saturation settings on your image, as well as increase the usage of the Cyan, Magenta, and Yellow Ink levels. You can print and play with these settings until you get the result that you want."

I would recommend the C6500 Gloss version for best versatility in label size and label finish. If you never need to go over 4.4" label width, then the C6000 gloss will be great. Where are you located?

Hi. We only sell label printers, labels, ink, inkjet coders etc. we don't run a label printing business. You can check out other channels like www.youtube.com/@printshoptalk

They seem to be holding up very well. Very easy to use once you get the basics covered. Ink usage seems to be fine for most of our customers who do not do super high volumes. If you were doing hundreds of thousands of labels, this printer's speed would probably not be the best option. Where are you located?

@@NeumannMarkingSolutions California

Yes it can. You just have to have your label supplier quote you on the material. Where are you located James?

I heard some one printed neck tags for clothing on one

Yes, you probably can, though, the material must have a proper inkjet coating to work properly.

Yes, it can work on t shirts, but this is an incredibly expensive machine for that purpose.