Видео

@@tenbob1973 100%. I did the worlds most boring test with weaker and weaker bilt hamber foam. From memory even down to 1% strength (it’s on my channel somewhere). Genuinely. Even really really weak foam still did a really good job. Saves money. Product lasts for ages. Just not quite so fun to spray or watch. Thanks for watching and taking the time to comment.

Hello. Thanks for watching and taking the time to comment. Dwell time varies dependant upon weather/temperature and thickness of product. I prefer to err on the thin side as previous tests I’ve done indicate that thin/runny is almost equally as effective. In this video. Probably 3 or 4 minutes. Maybe in the depths of winter on a really dirty car, with a thick delivery of foam I might go for the full 7 or minutes. My pressure washer is also the base model k2. The only mods I’ve made is a stubby gun from slims detailing, an extra long hose and also use the Mjjc foam cannon. The Mjjc genuinely made the world of difference in terms of foam delivery. It just seems to get the best out of whatever product you put it in. Hope that helps.

Thanks mate. Really appreciate your support. All the very best.

@@pigeonpoo1823 Yes. 100% thought about another coat on the lowers. You start to doubt yourself. I’ll do that while the paint is good. Thanks re the tip on glass coatings. Hopefully be ok in the next 5/6 days. I only got cheap/easy install gear. And yes. Re Subaru. Cannot wait. Thanks mate. Must have a catch up soon. All the best.

@@jellesoest253 Thanks so much. Means a lot. And yes. It’s only about the products on my channel. Honest, fair and genuine. Thanks for watching and taking the time to comment. All the best.

@@MusicMath123 Pleasure. Thanks for watching and taking the time to comment. All the best.

@@404notfound..... Thank you. Really appreciate your comment. I hope your IK serves you well. All the best.

@@tenbob1973 Hello. Thanks for watching and taking the time to comment. I’ve not experienced any problems from putting it on the windscreen. It functions a little like a windscreen coating. In that water just beads off and there’s no need to use the wipers. I’m one of those people that try to avoid using them anyway so it suits me. I would say under some conditions. Light drizzle for example. 5% of usage time you might experience wiper squeal but that depends on wiper condition, weight of rain etc. For me. I’m all for it. Give it a try. If it doesn’t work for you don’t do it again. Thanks again. Hope it works well for you. All the best.

@@pigeonpoo1823 Which spray sealant? 303? Be interested to see how your tests progress.

TW ceramic spray, though any that says it can be used on plastic and rubber would be fine. I'm just using it up. The long and short is, dressings darken but can attract dust and don't last long. Sealants haven't made any aesthetic changes but will last a long time and make cleaning easier. So I'm going to try TW ceramic over 303 Aerospace Protectant to see if I can get long lasting shine. maybe you could add that Megs spray to the air box and see if it aids longevity?

@@foxsake_ Good point. I’ve probably got one of those eco sachets of muc off in my bike box. Rarely get my bikes overly dirty these days so haven’t had the need to use it. I’ll pop it in my valeting box and remember to use it up next time I’m degreasing. Hopefully that’ll be fiesta next. Thanks for watching and taking the time to comment. All the best.

Do you know what. Whilst going through the Fabia bit by bit. It’s got me to thinking that I’d like to buy cars in need of love. Detail them to death. Then punt them on. Would give me loads of content potential. Plus I enjoy it. Have always fancied an old TT. I don’t really have the room but it’s 100% something I’d consider for the future. Who knows. If something comes up 🤔. However. I have my late mother’s car to restore so maybe that’d be a good little starter project.

@rev-you1975 great idea. Quick oil and filter change, clean and machine polish and shovel on.

@@pigeonpoo1823 Yes. That sort of thing. Nothing majorly complex (If I had a workshop I might tackle more complex stuff but that’s future state).

Can you recommend where to get the ramps you used under your back wheels

@ Sure thing. Just a moment.

Yes. It is really good. I’m impressed with it. Certainly a good first foray in to ceramic coatings. I’d hoped the lowers would have been immediately hydrophobic but maybe I’m expecting too much. At the end of the day. At least 85% of the car was immediately clean after foam stage. I’ll do another test next week with just a hose pipe to see how it reacts to that. Both cars were significantly easier than if they had no coatings so the effort is totally worth it. Obviously the synergy lite is significantly better than hydroslick. Thanks for the feedback on the mic. I really should sit down and make some test content during the week but life and work get in the way. I’m glad it was better though. Always aspiring for perfection. So much better with cameraman. Made my life so much easier. Hope all’s well. Have a good week. Thanks for your input as always. All the best.

@@pigeonpoo1823 100%. The difference is night and day. Got actual grip now. Pukka.

Well. According to David McBay it’ll make a year. Only time will tell.

It’s not bad at all. Not quite as good as synergy lite as you will see in the long play video once I’ve uploaded, edited and then uploaded. The synergy lite is absolutely awesome. Easy to clean as you previously mentioned. Really really easy to dry. Still looking great.

Big fan of your work.. keep up the reviews

@ Thanks mate. Really appreciate it. Keeps me motivated. Means a lot. Thank you.

Hello. Sorry. I don’t know. If you check out my instagram you can see the artist linked to the video. Sorry I couldn’t be of more help. I did try to find out.

Hmmmm. Good question. It’ll be gentle clean. Weak touchless. Bathe+ shampoo. That’ll be it I think. Although would consider ceramic shampoos. And yes. The Meguiars shampoo was brilliant thanks. I’d always thought “be super gentle with coating” to protect the shine but once stripped. With good paint. The cars have looked wonderful. Who knew. I’ll admit I didn’t. 100% good for a total reset. Something I’ll certainly be doing again.

They’re gonna get parked super close together. Same products. Same treatments. We’ll see how the coatings do.

Indeed. I’m genuinely really excited/impressed. It was so great to work with and the results are the best I’ve seen on my partners car. It looked pukka as he she headed off back to the horse yard. 🫣

@@Dias-v I don’t know. I didn’t. I did paint. Lights. Badges. Wing mirrors (outsides). I’d imagine that dedicated glass coatings are probably better suited for glass. Although, I will admit that I’ve never tried any. Maybe one day I’ll be convinced. Typically I’ll put Gyeon wet coat on the glass and that works well for me.

@@pigeonpoo1823 On it. In theory sun will just be setting when I get to application. Paint surface should be just the right temperature.

@@bluecieslak1934 Yes. I used to worry about that. But I literally show everyone when I drive anywhere so gave up worrying about it.

@@MrOrbitzHD Great point. Thanks for the tip.

Hello. Thanks for watching and taking the time to comment. I’ve never experienced any problems what so ever but take your comment on board. As soon as I get the Foz back I’ll remove the oem mat and pop it in storage and revert to just the texcarmats single mat on the drivers side. Thanks for the tip.

@rev-you1975 not a problem thanks for the video

No idea. No one ever confesses to that part. It’s no drama. Just means I have to do the infinity wax products at a later date. Hope you enjoyed the video. All the best.

@@pigeonpoo1823 Hello. Thanks mate. Yes. The polisher is great. Really enjoying it. Need to practice more obviously but starting to get some good results. I have now bought synergy prep (as you mentioned it). I don’t recall it being used in the review video I watched but I’ll review that again. None the less. It’s inbound anyway. Re the wheels. I’ve had gtechniq wheel protector in stock for ages. After the forester wheels have been refurbed I’ll protect them with that. I’m also having the Skoda wheels refurbed so will have capacity to test the synergy lite on one or other of them. Thanks for watching as always. Take care.

@@pigeonpoo1823 Looking at tomorrow’s weather forecast. It’s looking favourable for installing the synergy lite on my partners car. Problem is. The prep isn’t here yet. I think I’ll give it a whirl anyway. Fingers crossed it’ll be fine. Conditions are looking ideal and I want to maximise content output before the weather gets totally grim.

@@rev-you1975 go for it. It will provide an excellent real world example for people to see

Thank you. I’m super pleased you watched that far. Gimbal had been testing me for sure. It was a thoroughly enjoyable day thanks. Thanks for watching. Have a great day.

Thanks. She’s getting there. Just in time for winter 😂. Probably a good time to trundle her down to triton motorsport for her next phase of love. Then she’ll be 100% ready for spring.

@@rev-you1975 🚓💨💨💨💨

@@huggybear1639 Never a truer word said.

It’s got ceramic top coat in the paint. But there is also a strong possibility that I will get synergy lite on. I double checked with the garage today how long I need to hold off cleaning. Few days to cure then it’s game on.

@@noturbusiness6110 Thanks mate. Much appreciated. I genuinely don’t know yet. Ping me an email (in my bio) and I’ll tell you what I know thus far.

@@Dias-v Unfortunately not yet. Was just tinkering with CapCut having not used it for a few months. Just mixing things up a bit. Got big plans for some cinematic work with Foz once she’s back from paint.

@@pigeonpoo1823 Yes. Im disappointed too. Not too worry. I’ll get that on my partners car as soon as there’s another dry day.

@@rev-you1975 and Synergy lite should make cleaning it really easy

Glad you enjoyed it. I was a bit disappointed ag couldn’t quite match bh but I guess there had to be a winner. Bh slightly better results in less time. I’ll have to try diluting bh too. Maybe I’ll try that with the remains of my bottle.