Видео

No you can't, need to modify the codes

use a sharp soldering iron as well as a magnifying glass and check each joint after soldering

I haven't try, but i will test it soon with all modules tied to CYD

I'm working on it, please be patient⌛⏳⌛⏳⌛⏳

Thank you

Yes of course

😁😁😁

Try tapping around the bottom part of your screen and see if the touch panel seems to be in inverted position from the actual display. Should this happen to you, reflash your ESP32 module again, but use the v6 firmware. This should resolve the issue.

Now it's working ​@@ARTFOR

Working bro ❤😊

Glad to hear that👍👍👍

Well nice 💪😎👍

I'm working on it, hope it goes well. Just wait😎

Makasih bang, gak sabar pengen cepet sampai ya modulnya.😁

@ARTFOR sisa masukin box aja tuh om,..ditunggu video tutor nya om 😁😁😁

@@Nebo807-j5i iya ini lagi nyusun tiap modul ke PCB, tunggu ya👌

Modulator???.....

@ARTFOR sorry I meant marauder

@TekkenDlc oh...no problem bro👍

@@ARTFOR can I install Bruce on it

@TekkenDlc no you can't

Jangan dipaksa bang ntar takut rusak, mending minta soldering ke service hp aja

Atau pake SD card sniffer aja

@@ARTFOR tadi hampir rusak bang SD card tidak kedetek ,tapi setelah ku lepas semua solderan nya baru kedetek

Udah gemetaran

Kalau SD sniff gak ada yang jual

turn it off then back on, but if you're already in the launcher, you can go to the CFG menu then select restart to get to the apps you've installed

Yes i will soon

@ARTFOR Thank you. A CYD with all those are a great budget build

@ballashoes yes of course it's cheap😁😁😁

The operating voltage for IR RX is 3V3 to 5V(optional), and yes for IR TX it is 5Volt but when I tried connecting it to 3v3 it still worked so I kept using it for this test video, but if this affects the distance then I will change it to 5 volts

@@ARTFOR How will you use 5v and connect it to S3 on the board? Would this work using a battery? Another point, are there circuits that use IR TX with 3.3 volts? Wouldn't that be better?

@ccm7912 you can see how i use 4.6v on S3 in this video here : ruclips.net/video/bCL-1BgPmVg/видео.html

@ccm7912 I haven't used batteries yet because I'm still testing all the modules and only 1 more is waiting to be tested (CC1101 waiting for the goods to arrive) so I need a practical power source such as an adapter. As soon as I can test all the modules I will use batteries

Use this launcher flasher to flash your CYD : bmorcelli.github.io/M5Stick-Launcher/

And for firmware applications like Bruce and Marauder you can simply load them onto your SD card and install them after you success flash the launcher into CYD

Dùng thẻ sd có dung lượng bao nhiêu​@@ARTFOR

I'm using only 2Gb

Makasih bang👍

It Will automatic appear when you select "SD" menu on Launcher.64Gb is too big, try with 2-4Gb and format it with fat or fat32

No you can't

Kalo gak salah antara fat dan fat32.sd card-nya jgn yg gede2 ya 2 atau 4Gb jg cukup

Makasih mas, besok saya coba lagi format ke fat32. Saya pakainya 4gb, format NTFS.

@sofiandwiyanahidayat6102 oooo....pake fat atau fat32 bang ya, selamat mencoba👍

Saya pakai cyd esp32-3248S035c gak bisa,cuma separoh ..itu gimana .?

@@sofiandwiyanahidayat6102 format fat atau fat32 dan kapasitas micro SD jgn terlalu besar, ukuran 4Gb atau 2Gb jg cukup bang

😁😁😎😎😎

You're welcome, ok I'll think about it considering the ch9239 module is hard to get because it's not sold in my country

You're welcome

👌👍

sorry I misunderstood, I thought you were commenting on the CYD Launcher video, but you can find the parts list in the schematic or in the comments

You put a switch between Vin and +5 v batteries

Ah engga bang, sy cuma pake kode punya orang aja ga bikin.he....

Yes i Will

@ARTFOR thanks bro 💪💪💪

@NoNameJoke_ms no problem 👍

Yes i hope that too,.....

😁😁😁

Was that a WiFi or Bluetooth attack? What range did you reach while being effective?

Yes...But if you want to make it a long range, you can see this video also : ruclips.net/video/Wj_HYnWXbQk/видео.html

@ARTFOR without exaggerating how much it reaches, I will watch that video now. Thank you very much 🙌🙌

@Danmaxlara For Cyd, I haven't done an actual test because the project isn't finished yet, I only tested when I was working on a video project, only around 1-2 blocks of houses where I could detect the WiFi signal. But when using a marauder with an external antenna I could catch up to 6 blocks.However, it depends on the buildings around you

Should not happen, check the cable again and reflash bruce firmware

In some cases when flashing with V4-OG the screen is inverted but when reflashing with V6 can fix the screen. So you can try it, but when you experience the screen is inverted when using V6 you can go back to V4-OG

Search ditoko oranye dengan keyword ini "ESP32 Arduino LVGL Smart Display 2.8" 240*320px Touch Wifi Bluetooth"

Nama tokonya R******l

Sama2 👌

De nada, me alegra escuchar eso😎

You're welcome

You want to ask??? Asking here bro👌

Hallooo tooo

Yes i Will, just wait👍

Yes you can

@ARTFOR no problem will be faced while using

@RanjithS-g9z no, as long as you wiring connection is good

I use 2 channel IR because if I make a mistake in the wiring and the IR lights go off I can use the other one because ordering online takes 3-4 days to arrive and it will take time to make the tutorial video you all waiting for

Im about building this, will order all that stuff from Ali express then build it. If all went good, I will commission someone to make a 3d print case with sma connector (if esp32-wroom swapped for esp32-wroom-32u) and without the hole if someone wouldn’t. If I succeed, I will be sharing the files with this channel.

@AidenJoseph sounds very good! Since I'm totally new to all the esp32 and developer board world can you tell me if there are other parts I need to order? I'm about to order all the stuff from AliExpress also. The parts from your previous videos are already on my shopping list plus some basic stuff like wires and so... Are there any more modules that I can order as well for this project? Was thinking about rf amplifier or so? 🤔😂 Thanks in advance for all the information you're sharing, the schematics so handy I can't even tell! 🙏💯👍

For 3D print case stl file, this bro (@AidenJoseph) said that he Will provide the file if you want to.You can ask him for sure.Seach in the comments

That's right, you've explained it all....👌👍👍

Thank you for your all the detailed informations related to the parts and especially why I should buy them!!! 🙏💯👍 Really appreciate it! I will adjust my order on AliExpress and really looking forward to finish this project with all infos you provided to me and all the other people! 😉 For building the hardware device itself when it comes to soldering and stuff like that I'm a little bit more talented and equipped. 🤣 I'm playing around with custom controllers for playstation and repairing electronic stuff for quite a while now. Most of the time the devices tend to work well again, despite I'm getting electrified from time to time! 😂 But I've never been to building or programming arduino or raspberry stuff! So I'm hoping that my understanding of the building and coding will raise a little bit with this project... Thanks again guys! 😉

Pardon? A fork???

@@ARTFORyou never been on GitHub huh

Yes it can, check here: github.com/justcallmekoko/ESP32Marauder/wiki/flipper-zero

Siap, makasih👍

pakai yg mana om 433 atau 868 mhz? Untuk cc1101 nya?

@Nebo807-j5i aduh saya baru pake rf433 belum pake yang cc1101 jadi belum nyoba, nunggu barangnya Dateng bang.Beli online tp pre order jadi lama datengnya

@Nebo807-j5i sepertinya kalo pake CC1101 bisa dicoba semuanya mulai dari 315,433,868 sama 915

@@ARTFOR iyya om,rata2 di mp barang itu PO smua,mantap kayakx klo bsa recodr sm emulate ini om,jadi alternatif flipperzero bpjs,.hehehehehe

Thanks👌