![Leo Donnelly](/img/default-banner.jpg)
- Видео 9
- Просмотров 15 539
Leo Donnelly
Добавлен 16 окт 2011
Snow White Modded Hyte Y60 & Y40
Sensor Panel Skin - Aida64
drive.google.com/file/d/1FnCnmO33ZUm5ADCi7Tr8BYARDcASe4ZU/view?usp=drive_link
Case:
HYTE Y60 - Snow White
www.newegg.com/black-white-hyte-y60-atx-mid-tower/p/N82E16811737008?item=N82E16811737008
Motherboard:
MSI MPG Z790 Edge WiFi Gaming Motherboard
www.amazon.com/gp/aw/d/B0BL92SPJQ?psc=1&ref=ppx_pop_mob_b_asin_title
Processor:
Intel Core i9-13900K Desktop Processor
www.amazon.com/gp/aw/d/B0BCF54SR1?psc=1&ref=ppx_pop_mob_b_asin_title
Video Card:
ZOTAC GAMING GeForce RTX 4090 AMP Extreme AIRO White Edition
www.zotacstore.com/us/zotac-gaming-geforce-rtx-4090-amp-extreme-airo
Ram:
TEAMGROUP T-Force Delta RGB DDR5 Ram 32GB (2x16GB) 7200MHz
www.amazon.com/gp/aw/d/B0BG5L9H31?psc=1&re...
drive.google.com/file/d/1FnCnmO33ZUm5ADCi7Tr8BYARDcASe4ZU/view?usp=drive_link
Case:
HYTE Y60 - Snow White
www.newegg.com/black-white-hyte-y60-atx-mid-tower/p/N82E16811737008?item=N82E16811737008
Motherboard:
MSI MPG Z790 Edge WiFi Gaming Motherboard
www.amazon.com/gp/aw/d/B0BL92SPJQ?psc=1&ref=ppx_pop_mob_b_asin_title
Processor:
Intel Core i9-13900K Desktop Processor
www.amazon.com/gp/aw/d/B0BCF54SR1?psc=1&ref=ppx_pop_mob_b_asin_title
Video Card:
ZOTAC GAMING GeForce RTX 4090 AMP Extreme AIRO White Edition
www.zotacstore.com/us/zotac-gaming-geforce-rtx-4090-amp-extreme-airo
Ram:
TEAMGROUP T-Force Delta RGB DDR5 Ram 32GB (2x16GB) 7200MHz
www.amazon.com/gp/aw/d/B0BG5L9H31?psc=1&re...
Просмотров: 10 594
Видео
Mame 16x9 No Crosshair
Просмотров 55Год назад
This video shows you how to install my files to have Mame games display full screen with no Bezels and also no crosshairs.
Android Light Gun Install on Launchbox
Просмотров 121Год назад
BlueStacks Install for android lightgun games using Lauchbox.
Hyte Y60 Blizzard Build
Просмотров 971Год назад
Sensor Panel - Aida64 drive.google.com/file/d/1FnCnmO33ZUm5ADCi7Tr8BYARDcASe4ZU/view?usp=drive_link Case: HYTE Y60 - Snow White www.newegg.com/black-white-hyte-y60-atx-mid-tower/p/N82E16811737008?item=N82E16811737008 Motherboard: MSI MPG Z790 Edge WiFi Gaming Motherboard www.amazon.com/gp/aw/d/B0BL92SPJQ?psc=1&ref=ppx_pop_mob_b_asin_title Processor: Intel Core i9-13900K Desktop Processor www.am...
Legends Pinball Surround Sound Feedback Installation Video
Просмотров 3,3 тыс.3 года назад
Surround Sound Feedback installation on the Legends Pinball. Components: Rocker Switch Red www.amazon.com/gp/product/B06XZ1MF8D/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Dayton Audio DAEX58FP Flat Pack 58mm Exciter www.amazon.com/gp/product/B00CWEJJ9K/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1 Dayton Audio TT25-8 Puck Tactile Transducer www.amazon.com/gp/product/B009RGJ47S/ref=ppx_...
where did you buy it custom side panel?
Figure name?
What card is in the y60
ZOTAC GAMING GeForce RTX 4090 AMP Extreme AIRO White Edition
excellent video! Which one do you like more aesthetically? obviously it's something subjective
is it possible to put the rgb strip up top? or would that hinder the fans?
This is so beautiful!! Love both builds 💛
Hi I have the same fans how were you able to fit in the Lian li fan ?
The Lian Li fans fit in the Y40 with no issues. They were a little tight between the radiator fan and the rear fan. The Phanteks fans in the Y60 were more difficult. The three side fans I had to be assembled inside the case as well as the three bottom fans had to be assembled inside the bottom tray. They snap together with clips on each side and I had to drill new mounting holes for the screws.
Hey how much of a difference does the custom side panel vents make? Cooling wise..
It's a night and day difference. My card is almost touching the glass. When benchmarking I have seen over a 30 degree Celsius difference. The card would hit 100c with the stock panel on it.
Name of the rgb strip?
could be lian li, not sure
www.amazon.com/gp/aw/d/B0BMVXRMYB?psc=1&ref=ppx_pop_mob_b_asin_title
That's the one around the bottom, the top 2 are Lian Li Strimmers
@@leodonnelly5427 thx ,i really appreciate 🙏
Best looking pc ever
Great job!
Nice and helpful Leo thanks
Thank you for this Leo very helpful
beautiful build. using this as inspiration for my hyte60 build
AIDA64 skin pleaseeeeeeeeeeeeeeeeee!
drive.google.com/file/d/1FnCnmO33ZUm5ADCi7Tr8BYARDcASe4ZU/view?usp=drive_link
Very Nice. I used the Zotac white 3080 in my white Hyte 60. Waiting for the power issues to get completely fixed before I go 4090. I have the Zotac 4080 in my Black Hyte 60. You have a great looking system there. Congratulations.
First time seeing someone put the front exciters under the control panel. Have you tried moving these to the side? If so, what is your preference?
Can you set the ssf to work with the stock tables by feeding the signal into the external sound card's input? I am trying to upgrade to ssf from a buystuff haptics setup on my alp. I am setting it up right now with the built-in sound card.
I don't think it would work, the sound from the ALP would have to carry additional data to tell the external sound card which of the 6 speakers/exciters to send the sound to.
Do you get any clipping with the basshakers and exciters? Wondering as the LP 838 is only rated for 15w, but the shakers and exciters are 25w. Thanks!
No, I don't. I also don't turn them all the way up. They get very loud.
Thanks for the super quick reply. Working out my shopping list and your video has been a great help.
that's awesome, can't wait to start modding out mine, have a long way to go and probably will start by moving the exciters up and trying to figure out how to edit the frequencies of the sound.
Thanks Leo! Great job on the video and showing how you did your setup. Quick question, at 23:59 where you talk about how you integrated the bass shakers into your front and rear amps, it does not appear that any wires are connected to the green 2.1 outputs on the amps. Can you share how you wired those?
The bass shakers are connected to the green connectors. You can't see the wires due to the angle of the video. The hole where the wires go into the cabinet is directly above the green connector. The wires don't loop out like the rest, they just go straight up.
Why did you put a washer between the exciters and the cabinet? I'm ordering parts for SSF right now.
I actually didn't. I put the washer between the screw head and the exciter and not between the exciter and the wall of the cabinet. I did that to back the screw off just a hair because I was worried that it might be too close to the outer wall and mess up the art on the outside. I couldn't find any other screws that the head was large enough to hold on to the exciter and it was under a half inch. I thought a quarter inch screw was probably too short. The cabinet is not made of real wood It's a funky particle board that's very weak. I thought since the exciters would be vibrating a lot the quarter inch screw might rip out of the weak material. I know I put the washer on the wrong side when I was showing the components.
@@leodonnelly5427 ok thanks that makes sense.
Leo, were you ever able to get DOF linx setup for FX3 or future pinball. I tried following Terry's guide and installed dof and doflinx, made changes to all the ini files but still cannot get it to work. did you have to change anything with the dof config tool? or did you just use default values ?
Yes I got it working. I followed Terry Red and Major Frenchies videos. I don't remember having any problems other than when it started with administrative rights, I had issues with it not working properly, but since I start it regular, I have no issues. I do have a problem sometimes where I load a FX3 table and I have no surround sound feedback and then after a few minutes it'll pop on. It doesn't work on a lot of tables. If you join the surround sound feedback for visual pinball Facebook group those guys will help you out.
Great video
Followed this tutorial exactly thank you. Installed the exciters and bass shakers with amps but no subwoofer. Besides pinvol any recommendations for getting the sound tuned in. Do you have all volume knobs all the way up and adjust with pinvol software?
Yes I have all the volume knobs turned all the way up, and all the bass and treble knobs turn to eight. I then just adjust each table with pinvol to my liking, every single table has to be adjusted independently but only takes a couple seconds and then it saves it forever.
Awesome thanks. I will admit it’s hard to play non-ssf tables now. Ha.
Amazing job with the work and the details included in the video. In the components list there are a couple items that do not appear in this build, is the video board a generic replacement for the VIBS board which you ended up using in your AMAZING custom backbox? Would love to see even some basic details or guidance on what was required for that build, it looks incredible.
This is the HDMI board I used. www.amazon.com/gp/aw/d/B06W5DTGKC?psc=1&ref=ppx_pop_mob_b_asin_title They didn't have VIBS backs when I made the video. Right after that video I made a full custom backbox using the 32 inch monitor that is on top of the backbox in this video. I also used a 19 inch monitor for the DMD and used two 4 inch led speakers in it.
@@leodonnelly5427 That's what I was curious about as atgames is currently out of stock for VIBS boards again and was hoping I could just pick one of these up in its place. The notes on board at amazon only just up to 17.3 inch being supported, guessing that was not an issue. Thanks again for taking the time to create the SSF video using it for reference and plan to build almost identical setup after a short time playing it stock.
Thanks so much! This is super well detailed!
it a very nice mod but for me i feel like that to much bass for me and my wife would kill me from all that bass sound lol . and i would want something work with my legends pinball machine to . doing this mod seem like it only works if you use OTG mode and connect to your PC .
Cool video but doesn’t your playfield monitor freak out from all that bass ? I noticed with the stock exciters at high volume it would show glitches on my screen.
No, I had zero issues with my monitor and the cabinet shakes pretty good.
my legends pinball is all stock when it at high volume i don't get any glitches on my screen .. don't know maybe you got some lose connection some where just saying
Great video dude. Definately going to reference this when I try this mod. Got some questions about the bass shakers and hookup. 1. Did you get the Dayton Audio TT25-16 Puck Tactile Transducer Mini Bass Shaker? How exactly did you hook these up to the amp? You mentioned that the back bass shaker was kooked up to the back left and back right amplifier. Can you explain how all 3 speakers are hooked up to the amp given the amp has a +/- L and +/- R? 2. If you did get the bass shaker I mentioned, from the pictures on Amazon, it looks like they don't mount flat to the surface. How are these mounted to the bottom of the cabinet? 3. I bought the Dayton DAEX25 instead of the DAEX58FP. Do you think the DAEX25's will be good to use?
I bought the TT25-8 mini-bass shakers. The pictures on Amazon do not show it but it actually comes with a adapter to be mounted on a flat surface. If you go to the parts Express website and look them up you can see a picture of it. The amps that I bought to power them are three channel. 1 amp powers the left and right backbox speakers and a 6-in subwoofer. Another amp powers the rear left and right exciters and one of the TT25-8 mini bass shakers. A third amp powers the left and right front exciders and a TT25-8 mini-bass shaker. Each amp has a left and right input and they also have a crossover built-in which goes to a third subwoofer out channel. The Dayton DAEX-25 exciters Will work perfectly fine. Everybody who does this surround sound feedback system either uses those or the 58's that I got.
@@leodonnelly5427 Thanks for the info. For the backbox speakers, can you explain a little more about the hookup and what connectors you used (link if possible)? I was wondering if there was a way to use the backbox speakers in the 7.1 audio from the PC as well as for the stock tables? What are your thoughts?
@@craigyoung4068 For the back box speakers, I disconnected the main speaker connector in the back box (the one that you connect the back box to the main pinball machine) I then soldered beadboard wires ( www.amazon.com/EDGELEC-Breadboard-Optional-Assorted-Multicolored/dp/B07GD2BWPY/ref=mp_s_a_1_5?dchild=1&keywords=breadboard+wire&qid=1624891719&sr=8-5) to the wires exiting the left and right channels of the amp for the back box. I then plugged those wires into the speaker connector for the back box speakers. I do not use the stock tables, I only use OTG so I don't need my speakers connected to the stock tables. You could wire in a three-way switch and have one side wired to the stock tables and the other side wire to your 7.1 sound card. Then you could toggle between your computer and the stock tables. I have since removed the stock back box and built a new one with a 32-in monitor, a 19-in monitor and 4-in LED speakers.
@@leodonnelly5427 Thanks for the info. Maybe I will use something like this: www.amazon.com/RetroArcade-us-ra-3way-button-Arcade-Button-microswitches/dp/B00F1YQHIE for the button to switch between the speakers. Wonder if this would work. Or are you thinking of another kind of 3 way switch. I saw your backbox on another video you posted. The pinball looks so much better with a larger backbox and multiple monitors. In case you wondered, you can find me on the Facebook The "Official" AtGames Global Arcade Fan Page under my wifes account Julie Young.
@@craigyoung4068 That wouldn't work, You would need something like this www.amazon.com/Baomain-Latching-Maintained-Position-waterproof/dp/B01J31IBH0/ref=mp_s_a_1_3?dchild=1&keywords=three-way+toggle+switch&qid=1624900937&sr=8-3 And you would need two switches, one switch per speaker
Very cool. Good job, dude. I'm thinking about doing something similar. Nice to have your work as a reference.
is that wire (the 6 primary colors you showed) using stranded wires or a solid wire? And can you explain in a little more detail about that sound card? Where does its audio input come from? Is it spliced into the AtGames speakers, or is that sound card just connected to a USB 3 port on the computer? Originally, I was looking for a video on youtube (and I saw your video) that shows how you could hookup external speakers (just like some nice logitech computer speakers and sub) directly to the Atgames pinball machine, so that it sounds louder with bass. In that situation you would need a line output like a RCA left and right or a 3.5mm jack to feed into the external logitech speakers
The wires are stranded, the sound card is USB and I do have it connected to a USB 3 port. Once you install the drivers for it Windows just sees it as a sound card and you just go in your sound settings and click on it to make it primary. I do have the sound card going to the two back box speakers, The speakers have a disconnect so you can remove the back box That is where I connected the sound card to those speakers.
Before I installed the surround sound feedback I was using my two PC speakers and sub still connected to my PC. Typically your sound is transmitted through the HDMI cable to the Legends pinball however you can select your PC speakers as the primary sound output.
ps could you make a video showing how you do these settings where this was mentioned below: It's not needed, but it does greatly increases the low end of the sounds. I definitely prefer it with the base shakers. If you use Pinvol You can adjust it to where the flippers don't activate the base shaker but the slingshots and bumpers do, makes it more realistic.
I do use Pinvol and every table is individually set with its own sound settings. There is no standard setting for volume on tables. Some tables the music is too loud some you can't hear it at all. Some tables you can't hear the the sound effects. Some tables the flippers are extremely loud activating the space shakers and some you can't hear the flippers at all. So as you play a table you have to tweak all the sound settings for that table in Pinvol saves all those so when you open the table again they're all set.
So is it worth having the bass shakers in the bottom connected to the amps or is is overkill? have 4 exciters hooked up on sides with a subwoofer. Seems like a lot of extra vibration from those two bass shakers in back and front middle that might not be needed? Thanks!
It's not needed, but it does greatly increases the low end of the sounds. I definitely prefer it with the base shakers. If you use Pinvol You can adjust it to where the flippers don't activate the base shaker but the slingshots and bumpers do, makes it more realistic.
@@leodonnelly5427 gotcha. Thank you! Great work.
Holly crap im very impressed. Great work
This is very cool. Thanks for documenting.
wheres simpsons bowling?
👍 great list, great update for legends ultimate!
How can I get this
I copy the 822 on usb, then put the cox folder on the usb then build and it doesnt work
Hi, can you explain how to build the package in addonx? When I put mine together the games work but theres plain txt n no pictures n video. I guess im putting the build in wrong
Just look up atgames coinops x to get tutorials vids. This is very time consuming. Basically need to create UCE files. Keep the name exactly the same as the roms. (Makes it easier) Then need to look for mame picture logos, video snaps, covers, and marquees (just like you see in this vid the name of the games). You can get coinops next and find alot of pics and videos ect. Arcadepunks website. And you might also find other sites you can find packs, will have almost everything. This looks awesome so I'm redoing everything. Just takes up alot of time.