Видео

You didn’t show that the fog lights went off when the high beams were on. By law they are supposed to go off. Did you test it but not show it?

Did you end up having to take the car to the dealer to reprogram anything?

very helpful , thank you

Id like to know whst all tools were needed for replacing this transmission

what kinda k24 is that

Life saver. Straight to the point, very precise, well explained.

Going to try this out today, thanks for the video.

Thank you! Simple and easy, I was able to do this to mine. Yes the 2 bolts inside the audio is a pain! You cannot see it as your head isn't small enought to fit where you can see it and it's up there deep inside. You need a fairly long neck socket to get there.

Question, I have a 2011 LX Civic the RPM cluster goes in and out, I pulled the dash apart and noticed when I move the wire harness a little the RPM Cluster comes back on. Im guessing its the wiring connector going into the back of the cluster. Have you heard anything like this happening? Thanks

Than u

You dont need no scanner just push it yourself

Where you located at

Thanks for the video! Super helpful!

It's an old oil can you poor oil in your car

Thank you for your videos ⚽ I have replaced the fuses I checked two areas in my 2016 Frontier one fuse was burnt I replaced it but I'm still not getting power in my cigarette outlets so I'm struggling to keep my cell phone charged WHAT DO I DO NEXT?

I have the carrier bearing hanger in the middle on order and should be replacing it this weekend. So a little more work for me since i have to separate the shafts remove old bearing and press on new bearing

Looks more like an engine replacement than a swap.

Thank you so very much! You made my day!

How heavy is the top engine cover (Engine Head) to get to the Pistons and Connecting Rods? Was it very hard to remove that head? Thank you for a great film.

@2:45 How heavy is the top engine cover (engine head) to get to the pistons? Was it very hard to remove it? Thank you for a great film.

I liked and subscribed I was wondering can you please tell me which fuse in this video is for the ACC ignition to turn on and off so I can add my dash cam. I can see it tells you on the back of the panel which one is ACC but it does not turn off when the ignition goes off can you please look at that for me

U skipped the most important part..

I have the exact same issue with my 2017 Nissan rogue where do I get to the panel on the 2017 Nissan Rd.?

Hows the drone on that thing, if you still have it

Any tips on taking thd bulk head wiring off?

EXTREMELY helpful. Thank you Sir!

Gracias si suluciones mi problema gracias

Nice to say hello, could I change the CV joint and would that also fix the problem?

Great job my friend. Thank you so much great help God bless.

Thank you! Just did this in no time at all. Wonderful video.

Torque converter bolts are 17mm and you have to turn the engine by hand to get to them, the crankshaft bolt is a 22mm

Pariente A cuánto van torqueados las bielas ?

How do you extract the fuse nearest that big fat white "extender plug?" ( it blocks access) and what is the name of the extractor pliers? you used on this video? thxs

Bro do you think i can put an SI cluster on my 8th gen hybrid IMA civic ? Because I’m tired of the blue color i want to switch to red

There are after market one that are all one peice and cheaper than a grand

Thanks man. Very helpful

I have a 2012 5.7 2wd thank you so much I guess now the only part that scares me is buying the overpriced driveshaft

Thanks for the vid bro. Luckily my wife’s rogue had an extra fuse.

Great video, straight to the point and informative! Problem fixed !

Did you use a ball hone on the cylinders? Or just slap the new rings in?

I’m in the middle of this: he’s making it look way quicker than it really is. You’ve got to remove the thermostat housing pipe thing, detach the exhaust, get harnesses out of the way. Figure 5 hours to get both heads off. And tons of gaskets and o rings and shit need to be replaced when putting it back together.

Thanks, Sir

Lo que quiero ver es como lo pones para tras??

Do you know the location of the fuse for the boot 12v socket? I have the same issue but reversed, cab sockets work fine boot one does work

How long did it take you to do?

Exactly what I needed. Thanks so much!

I am changing piston and rings, my first time doing the job, can you maybe guide me with what is the correct torque on the pistons please

Thaks brother for this video, you helpme so much

Thank you for your video, I’m going to try to do fix this issue on my Nissan tomorrow :)

For mine it's the front drive shaft comes out and it vibrant slot before coming out