Видео

Damn shame. Any running vehicle is a blessing and should be maintained.

How do you get bottom bolt out? It’s to close to oil pan to get anything on it

What temperature should be the right level of the transmission fluid and what level as well?

Snap on mg 725 is a beast tho I’ve used both the 850 and the 725 /the 725 feels more powerful but I traded them both for an ingersoll Rand 2235timax and now all I use is Milwaukee impacts and my ingersoll as a backup battery wise all of my battery’s are 6.0 high output and up good video it just bought back memories keep doing what u doing and godbless👍

It simply sounds like it just needs more oil bc if an air compressor is at the right pressure and it struggles it just needs more air tool oil now if it doesn’t then u got a dud 👍

Hello I pulled my valve cover and noticed a broken spring do you have a guide on how to do this?

😂 Yay me!!! Mines about to go out on my 2017 ford escape.

My 4runner has had a blown head gasket for 10k miles 😂 and runs like a clock

Witch time sertz kits did u use ? I see there ones that cost 500 and there a one kit that cost 115 there both for the 12 x 1.5 my question can u use the smaller kit or do u have to use the bigger kit witch kit did u go with ?

Where’s the multimeter?

DO NOT BUY AMERICAN CARS !!!

Same exact thing just happened to my 2020 sierra… 60k miles. I’ve read a few pages now this seems to be common

Man that oil pan is nasty AF,gonna have some bearing failure.

It's knocking it wants something to come in!

I would be happy to have teardown completed for me !

At least half the work is already done

Realistically…. Annoying as hell. And anything lost would be on them. But not the end of the world. Also. How the eff did the dealer approve the warranty on that. No way in hell any dealer of any brand truck, tractor, machine or a fucking gumball dispenser would take a warranty in that state.

Likely a lemon 🍋 and will sell like new 😆

Dang! That's sad.

People used to bring me cars with their engines in the trunk and nearly all the bolts missing if they weren't broke off in the engine. Expected me to do a miracle and then was angry when it came time to pay the bill because the other guy ripped them off and left them with that mess that took me longer and cost more to fix.

I cam tell you why I'm not working on cars anymore. At least at a business. I do the side work thing. THEY DON'T PAY YOU PROPERLY! even as a bmw master tech. They told me 100- 150k after a few years. That was 20 years ago. Never saw 60k. Ever. I have the knowledge, and experience. No one wants to pay for that. They want idiots that take $12 that forget to refill oil on oil changes from time to time. So they can save a buck.

Then you get paid less because it’s warranty work right ?

Respect to you for putting it back together but yes it’s bullshit

Mo money

I love these new JUNK engines I make a lot of money 💰 fixing them lol way to go GM another quality product 😅😅😅😅

Spun rod

I'd guess the crankshaft has walked and has destroyed the thrust bearing and is now currently working on the rod bearings. It's that or the dreaded lifter collapse on the afm/dod cylinders. Hard to tell here, but sounds like it's in the bottom end.

I'm in the collision repair business. I've had people bring in cars where they beat a dent out of the quarter panel out with a claw hammer and think i should charge less since they helped out.😂😂😂😢

That literally made me laugh, thank you. #1 i would expect that any non-certified work would void the warranty in question. So you are probably not doing the work under warranty. They either do not have the facilities, equent or labor to do the work under factory certification but dont want that info to get out to their client base. They are going to pay your shop to do it and minimize their risk. Cutting their losses. Or the opposite...you dont have the certs for this work but your labor is "price-competitive" shall we say. Just do the job and stop bitching.

Refuse it maybe.

You put a tune on a vehicle and the dealer knows your warranty is voided. You got trash team to take it junk like that ^

They touched the vehicle warranty is voided. Whoever took it apart is now responsible for it not warranty. If your service team cannot understand that move shops.

Same with ours too

Whom ever was machining blocks at GM that day was either high or hungover

Instead of showing miles, show me the HRS running 😅 It’s obvious these engines have low oil pressure at idle, now add it idling for hours in the heat…….. na, this smells like operator error. I’m not saying gm or any other auto-makers aren’t having issues but let’s get to the root cause for most of these problems, idling, lack of proper services, over-stressing the vehicle (exceeding its pull capacity), adding forced induction (see this a lot) and poor quality oil and parts. Also, where was this vehicle living? Was that place considered a SEVERE-MAINTENANCE area? I don’t care if you work at a gm plant, I need more info to make sure this isn’t “someone’s uneducated comprehension “ or I should consider this a problem.

Bad Tolerances and lubrication.

Rod knock

Bang,bang , nudge nudge,wink wink,is anybody out there?can you hear me?bang bang again 😱😱😱😴🤔

Ran dry

It's a chevy every mechanic knows these inside and out😅

Great update your the man!!

Under no circumstances go In an say " I need it fixed I have to get t9 work tomorrow" 😫 350$ job they KNOW FOR AN ABSOLUTE FACT THEY CAN GET YA FOR 700-1500$ An y9u have n9 choice t9 pay. An they can make up anything an make it seem right cause u don't know cars. You wait f9r this RPM act. Oil change? $450. Cause legally u can't work on your 8wn car after. That will make mechanics overnight milli9nares. 110% for certain they already make more money every year then the honest jobs that actually have t9 be done. So much money is made by telling Harry his rear end went when its a $40 coupler😢 an 15 minutes. When you goto a mechanic watch yourself. On everyth8ng I love they WILL "Up sell" telling u u need an engine when you need an oil change. That's there " Up selling" as far as they see it if u don't know about your car they are going to drive u ruin.

😂 Till they get that 12k for 4 hours of work. " Sir, Sir your gonna need 3 transmissions an an engine oh an a rear end" ( Customer) No I don't I'm all set. Mechanic " Sorry sir that's a road hazard you can either pay me or I LEGALLY get a free truck! If you find a mechanic that's truthful ya better stick with them. Otherwise you would go In needing a $100 oil change, they will ask, ever been here? No? Yeah. Now you just need to clear the account an sell your home cause mechanic has " lights an a shop to pay for" 😂 meanwhile YOU JUST PAID ITS RENT FOR A DECADE. 😂 they make used car salesmen look very very honest. When younger went in needed a wheel hub all the sudden, I said no they said well we NEED to atleast weld it. Instead of $400 for the part the weld was $120. Come to find out 3 months later nothing was welded. If ya need a $50 MAF sensor they will say u need that an a intake manifold gasket ( suck $300 more out of you though didn't need it.) An they will tell u. It's a business. Capitalism usa. 98 year Ole Doris comes in all of the sudden every part on her car is broke. 😢 learn to turn a wrench. An kee0 an eye out for brake job 799$ other $120 shop tools 220$ an so in so forth.

I was a Toyota tech 25 years and if a vehicle was under warranty and came into the shop like this. There was absolutely no way it would be covered under warranty in our shop.

I thought if you touched it, it would void the warranty ?

had same issue in a caddy.

People in the comments have their feelings hurt for no reason

Why’re you complaining? They did half the work.

Idk why heads are comming off a new truck this is why Chevys are garbage but I feel for you that just isn’t right at all. Damn ugly trucks too.

Never buy government motors