Видео

@@Kinski79 I get a similar result with my Invader here and there and what i believe it is ,, is that your side lever action didn’t engage properly. First try taking out the magazine and slightly push that side bolt forward gently without magazine in. Reason for taking out mag is so you don’t shoot two pellets out at once. If this works try the mag again and give it a little help pushing forward. Other than this I’m sorry I wouldn’t know any other reason for the invader to be functioning badly? Good luck and thank You for the question. Keep your plinking on target 🤠

@@periklhsperiklhs7880 yes this little Tuxing compressor does not hold up to the pressure of using it. The piston that produces the pressure inside the tuxing box has a sleeve just like a regular car cylinder, that sleeve warps because there isn’t enough ventilation or cooling in this little compressor. So sadly, I no longer use this compressor. I use a Ventura compressor now. Thank you for watching my channel and Keep your plinking on target 🤠

Who you believe is good compressor fan cooled or water cooled I had one tuxing 031 an if I left for long time the gasket was failing and I thought for buy one vevor fun cooled I want one good opinion thanks.

@@grasshoppercrews1296 Thanks for the comment Keep your plinking on target 🤠

@@stevengoodman3498 Thank you for watching and leaving a comment. It’s fun sharing our experiences of air gunning with other fellow air Gunners. Keep your plinking on target 🤠

@@stevengoodman3498 Thank you for your complement Keep Your Plinking on target 🤠

@@stevengoodman3498 totally agree on easy figured my Dad has the awesome set a Tv Repair tools and yea I can fix it ,,,, Oh wait that’s from Fast Times At Ridgemount high! lol Keep your plinking on target 🤠

@@MrErik038 thanks for the comment and thank you for your suggestions. Keep your plinking on target 🤠

@@oldmancrypto6190 Thank so much on this advice! Never seriously even thought about a valve at the end. Keep your plinking on target 🤠

@@oldmancrypto6190 first of all Thank you for watching and Subscribing to the channel. And thank you for the wonderful compliment you gave me on the Air Tank Case. Love to put it out there to sell but? I just can’t stand bad remarks or someone being picky on the Case . But thank you for the happy smiley face you put on me with your comments. Keep your plinking on target 🤠

@@kevinmccoy2088no no no we got rid of the coach yesterday instead of! lol

@@timmy4539 Been good and been busy with our family project here. One of my sons moved back inn and we have been working on our Family 65 Buick Riviera it’s been with our family since my father in law pre ordered it in 1964? Check it out hope you like it? ruclips.net/video/0YVpcx4qsJ0/видео.htmlsi=4C6iDhS4rnXM4A4t

@@fgvmadieglez456 thanks I tried to show and share my adventure with fellow compressor owners,maybe I will show something new or you can get a good giggle on my post,, lol Keep your plinking on target 🤠

@@fgvmadieglez456 and a Thank you for watching my channel and I hope I was able to help you with your compressor Keep your plinking on target 🤠

@@thecryingdutchman8922 first thank you for watching this video I haven’t given my Invader a break down quite yet but it’s sounding like I’m going to be doing a tear down soon . But m sorry I do t have an answer right now and I’ll be away from my airguns for about a week? But when I get back I’ll t least look into your question on the barrel. Keep your plinking on target 🤠

@@domin8rdominant763 thank you very much!

@@MWS67 yuuuup ,, you always get the correct answer to repair something afterwards,, lol Keep your plinking on target 🤠

@@domin8rdominant763 I lucked out and had someone tell me about the valve pin. It's the weak link in the HP SS series.

Yeah, big waste of time; unnecessary removal of pins .Overtightening screws for no reason. By the way, you don't need a full toolbox to replace the valve pin . 3mm , 4mm , crescent and a flat screwdriver.

@@fjqtaxch9 it feels good when you see and feel the positive results. Keep your plinking on target 🤠

@@adcaptandumvulgus4252 yuuup and I’ve learn as I’ve been going with the Invader,,, I will admit though I don’t use the Invader as much as the Brocock Commander XR 25 Cal. and my AEA HP SEMI AUTO SS PLUS 25 cal.

@@adcaptandumvulgus4252 be a little bit more expensive for me the blitz…….. I’ll be going full auto with all my lead ! lol

@@stedyone1090 Thank you and Thank for watching Keep your plinking on target🤠

@@timmy4539 lol , sending you an email

@@domin8rdominant763 👍

@@timmy4539 just finished putting it together on Sunday but had to edit my video and posted yesterday and now I’m working on doing a follow up with the part that I received! Thanks for being an awesome Plinking Bud !

@@domin8rdominant763 👍👍

Yes indeed!

Wish I had thought of the mask? But I wasn’t exaggerating when I said there was an abundant of lead dust in the air rifle. Keep your plinking on target 🤠

@@Bemx2k sadly my Tuxing compressor took a 💩after I rebuilt it I only got 40 more uses and the cylinder head warped again. This little compressor gets way too hot for its cylinder sleeve. I was just save up a few more dollars and purchase this one on Amazon. Umarex ReadyAIR HPA Portable Air Compressor Pump for PCP Air Rifles and Airguns This Umarex is more reliable and has a cooling unit. Were you add water so it’s a longer life. Thank you for watching my channel and leaving a comment Keep your plinking on target 🤠

@@Chupacabramusic no the Cattleman has been officially strapped to the wall of shame ….. Really into my Brocock and AEA a lot. Sadly, I’m down and out with a really bad knee. It was my shoulder the last four months now it’s my knee dang it sucks getting older. lol Keep your plinking on target 🤠

@@slingshotwarrrior8105 Thank You,,, it’s been over 7 months since I’ve been plinking or terminating varmints. Keep your plinking on target 🤠

​@@domin8rdominant763That's so true, bro!

@@timmy4539 Thanks for that but for me I’m thinking of the wife more,, how’s things with yall? But yes I’m ok my shoulder is starting to feel the pain just a little.

@domin8rdominant763 Do you mean my wife or yours ?? My wife finally came home from the hospital after 3 1/2 months of being in there !!

@@timmy4539 yes I was thinking of her. Your wife. And I’m glade that she’s home

@@AirgunJohnny lol you got me laughing speechless!

@@MarkusDelRey first thank you for watching my channel and leaving a comment. Now for lubricating this little monstrosity? I didn’t put any in when it was together. But it would seem that instructions would have suggested it? The only time I put any kind of lubricant on it was when I took it apart to rebuild it. But sadly after I rebuilt it after 45-50 uses it broke down again! My conclusion on this is that this little compressor gets to hot and the piston warps and that is what happened to me twice on this compressor. If I may suggest another compressor to you if it’s not to late it would be this one . Umarex ReadyAIR HPA Portable Air Compressor Pump for PCP Air Rifles and Airguns You can find it on Amazon It’s a couple of more $$$ but it’s worth it because you don’t get the hassle of it over heating. So sadly as you read this I no longer own the Tuxing compressor and I upgraded it. Thank you for the comment Keep your plinking on target 🤠

@@domin8rdominant763 is posible overheating is caused for high friction, is high pressure compresor then i mean greasing is needed🤔 Therefore, the piston wears out

@@MarkusDelRey yes I agree with you “But” in the instruction manual it says not to use lubricant which I think is wrong,and if you can watch the factory very dull video it also says no lubricant should be added?. Tuxing needs a water cooled version of this. Something smaller than a 1/2 gallon water reservoir? Sadly I must say that if anyone should be looking into any kind of small high pressure compressor it should be water cooled. Thanks for commenting back my fellow plinker Keep your plinking on target 🤠

​ In many air cold compressors you put a couple drops of silicone oil in it about every 5th use, owerwise it will end badly, maybe that's what happens to you. 🤔

Also you never close the bleed valve befor starting it oserwise it will have a vacuum effect and destroy sooner or later the compressor, that's for all compressors.

I would like to first thank you for watching my channel and as for the cover on my compressor I actually paid somebody to make it. I made the pattern for the compressor with a box then took the box for sizing to a tailor because I don’t have a car upholstery shop around me so I showed the pattern to the tailor and I gave him the material and he sewed it all for me together. He did a good job, and also for the dolly on the bottom, made it myself out of 3/4 plywood and casters from Harbor freight. If you like, getting your hands into material construction type, the dollies pretty easy to make,but you need to find somebody who can sewed and get your material from Joannes fabrics. Are any kind of fabric store that you have and pick up the material you like. Once again, thank you for giving my channel a chance and leaving me a comment . Keep your plinking on target 🤠

Really appreciate that comment. Thank you.

Wow another 4 weeks ?! Your poor wife. So it’s been 4 days now since I got two shots around my shoulder and if I’m doing well in two weeks I’ll be getting one more DEEPER! And I’m going to start PT in two weeks if I don’t get the one shot! Ugh! Not the way I wanted to live out my life being still a bit young not much but a bit! lol

​@domin8rdominant763 🤔 it won't let me pull up the ( read more ) and I don't know why ! I had to restart my phone to get to the read more parts !

@@timmy4539 I can send it to your email? Still Thank you for supporting me here.

@domin8rdominant763 it's all good my friend I just had to restart my phone I guess it had a Brain fart or as my wife would say it had a Blonde moment lol I just hope you're doing better !

Don’t forget it kicks like a Mule!

I hope you can get this translated? Thank you for trying to understand and giving it a chance. Keep your plinking on target 🤠

First thank you for watching my channel and leaving a comment. As for the invader? Still shooting straight and strong! Now for recommended it to you I will ask you this first? Are you looking for that fun plinking PCP or are you looking for a PCP for pest control? Invader is good FUN PLINKING or for small varmint control,if you are going to hunt that, but if you’re going out there for bigger targets like coyotes look at the AEA Airguns 25 caliber and up. I hope I gave you some sort of mind on it? Keep your plinking on target 🤠

@@domin8rdominant763 planning to hunt together with my friends, they using a single shot .22 pcp rifle for about 50to 75 yards target. I prefer semi auto so I can use it for home protection as well, having it is better than nothing.

Thank you for watching my channel and thank you for leaving a comment. I no longer use the Cattleman it’s a complete waste of time and $$$ and the company was full of lies! But as for the invader? That’s still going like the Energizer Bunny! Keep your plinking on target 🤠

First like to say thanks for leaving a comment and as for your question I have had no negative issues with this optic. I’m extremely happy with it , the distance I can zoom inn and focus is just awesome! I hope you have the same results as I have with great accuracy and zeroing in on my shots. Keep your plinking on target🤠

First like to say thank you for watching my channel and as for the side camera mount I purchased it from Utah airguns and it was around$200. Here’s a link directly to it. utahairguns.com/product/side-shot-phone-mount/ When you purchase, be sure to order the correct ring mount for your scope . They sell three tube sizes for your scope to mount on. Keep your plinking on target 🤠

First of all a BIG THANK YOU for watching my channel and as for that pellet rifle!? I no longer shoot it for a couple of reasons. First- man it kicks like a mule when firing it. Second- I got spoiled shooting my PCP air guns. Now, if you never ever used a PCP Airgun you’ll be like what are you talking about? I got spoiled, not breaking the barrel anymore. All I have to do is press my trigger and fill the air gun with compressed air, after doing that I put this pellet rifle away and I’ve been using my Airguns PCP ever since. But I can still answer this question for you. It shot great when I used it ,I just couldn’t use a scope on it because it rattles so hard. It’s a fun blinking air rifle for sure.. Keep your plinking on target 🤠

Wow! That’s not good! Hearing about you buds compressor! I hope it wasn’t because of not checking fluids? I did find out that a few owners don’t do there basic maintenance from manufacture when I was chatting with the company. This machine rattles like a wooden roller coaster ride and hard so I have tightened up to hoses and as you saw replaced the gauge.

@@domin8rdominant763 his compressor is maintained like a Ferrari so it's not the lack of maintenance it's just bad parts and quality control !!

@@timmy4539sad to know ,, just have to be happy on mine that it wasn’t a big issue

@@domin8rdominant763 🤞🤞 for you my friend !

Happy New Years my Fellow Plinking Bud! Tim you have been a cool friend to chat with . I hope you have another year of awesome Plinking! Keep your plinking on target 🤠

Lol, Thanks for the compliment. I feel if I can fix it myself it’s money saved in repairing service. So that means extra tins of pellets! Lol You have my Curiosity ? what is going on with yours? Thanks for watching again Keep your plinking on target 🤠