Видео

I’ve been agonizing over bottles for months. I like the look of identical bottles on my shelves. I just want something reliable. Everything I’ve looked either fails or leaks! Oh and I can’t figure out which bottles need a solvent resistant sprayer or an acid resistant sprayer. Wish there was a guide of some sort!

I’ve been agonizing over bottles for months. I like the look of identical bottles on my shelves. I just want something reliable. Everything I’ve looked either fails or leaks! Oh and I can’t figure out which bottles need a solvent resistant sprayer or an acid resistant sprayer. Wish there was a guide of some sort!

Fantastic review! How does this compare to P&S Xpress?

Awesome video. Thorough and actually shows before and after! Will buy one for my father.

Thinking about upgrading to the 4 inch casters. Think they hold up bring used outside on street?

Appreciate you sharing the video. You’re right, time will tell. Maybe torture test?

They have updated their instructions concerning dilution to up to 256:1. Which i've used, panel by panel. It seems to clean well after my first use. DIY cleans very well.

Which one should I buy both the LE’s when they come out or the DIY and the LE 1 inch.

What does it take the HP to?

What did you use to cut that plastic part at the end? Im scared to buy it now if I have to do such a mod haha.

Great video! Thank you very much for sharing your experience and oppinions. I find this video very useful and gave you a huge like.

Don't forget to pre-filled the oil filter and only crushed the washer and hand tight the oil filter.

Hands down the best 3ph system on the market. Glad you enjoyed the labo products. As for saying primus and purifica have no scent is wild. 😂 . Primus and purifica can be used in direct sunlight with absolutely no issues. Did a test here in florida and reggie has said it's fine. Great review 👏

Glad to see you are diving into Labo. Good video, some suggestions and tips I have learned over the last year using them. The new version of Primus 2.0 is substantially better than the version used here (original) as well as Purifica which is now an upgraded formula (technically not enough to be a 2.0 from what Reggy at Labo explained) - increased strength, lubricatio while maintaining safety - these are now available in the new cylinder style bottles. Both of these new versions can now be used in the bucket, which makes them incredibly versatile. For 3pH after the second step of foaming on Purifica - you leave that on the surface and begin the contact wash with Semper in the bucket (1 oz to 6 gallons of water). Dilution ratios in the foam cannon for both Primus 2.0 and Purifica (upgraded version) depend on level of dirt - 1:10 for both as maintenance. If heavy dirt go up to 1:5 for both. As mentioned below, Semper has very strong dilution and technically wasn’t designed to use in the foam cannon. That being said I do use it in the foam cannon as well (MTM PF22 and Kranzle 1122). 1 oz of Semper and 1L of water produce amazing foam. It’s quickly become my favorite pH neutral shampoo - love the scent and lubrication. To me KCx Gfx is the only other shampoo it rivals in scent haha too many fruity scented pH neutral shampoos on the market these days.

What kind of nozzle do you have on your pressure washer gun? Like how wide the spray pattern is. I’m sure you are using a 40 degree, but mine never sprays that wide. I have the MTM Acqualine 4.5 40 degree nozzle for my AR 630TSS and my width of pattern is nowhere as wide as yours.

Not sure what dulution you used, but Sempre isn't designed to be used in a cannon. All you need is 1 capful in your bucket (1:800 dilution). The surfactants will clog up your coating if used more concentrated.

If you like the multistep process you should definitely check out the chem x stars and stripes, some of the best touchless out there and super slept on. Will be super interesting to see how these will compare.

Hi There 🖐 I recently used the Labocosmetica 3 ph wash method on my Toyota Tundra, that I ceramic coated about a year ago, and was blown away how it unclogged and restored my ceramic coating. I am extremely impressed with the results and would 100% recommend you try this impressive wash system. Cheers!!.. 😎

How did I not catch that you had a Mercedes SLK/SLC? Love that car. Have a good day!

First! Peace & Love.

May I know the dilution ratio? I'm going to use it in Korea Bucket Ratio I'm curious about the ratio of the sprayer.

Did you try temu fan? 24 volt? How to get dual Speacom to works with GX3? How big speaker is GX3 and GX3 for? what about VXA-3000 2x 1500W by vonyx?

Make sure that you lubricate the o-rings with a little oil so it keeps them from snapping and causing a massive oil housing leaks for the drain and filter housing.

Do you think I could get away with using 3 Labo products to cover all bases - Primus 2.0 for wash/pre-wash, Purifica for acid deep clean and Idrosave as a drying aid/following for a bit of protection.

When will ypu test out the DIY Rotary and DA units? Thank you for this great informative video;)

The salt water cleans the resin used to remove calcium and magnesium... not added to house water directly. Its added though ion exchange with resin

Those tekton ratchets are awesome

Thanks!

Thanks for the grit guard link. I love finding things that work well.

Idrosave is a really good rinse less wash but definitely requires a more precise approach than some other rinse less washes. You want to prespray and wash panel by panel being really careful not to over spray other panels. Basically, you don't want Idrosave to air dry anywhere on the car.

Appreciate the shout out. Idrosave is definitely a panel by panel rinseless. The print is just so tiny on the bottle for the directions so it is easily missed. Good thing you caught those spots because the longer they sit the harder it is to wipe them off as the protection is very stout. Good video. What are your thoughts on that green sponge?

If you check out Ultima wrench list, they also make an incredible interior dressing, in my opinion better than many of the others. For some reason, Ultima does not have a lot of advertising. I think it is under recognized and appreciated for its quality and value.

Really enjoy your channel and the info is great. Thanks so much. One recommendation to try another new rinse less / waterless wash. It iscalled Ultima, I think a German company, and sold on Sky The Limit, Carpro based out of Florida. It is by far the best and lwaterless wash I’ve ever used. I have tried ONR, McKees, hero, lab, cosmetic, DIY detail, And Ultima is by far stand out the best! It really excels an interior light cleaning as well, great for bird bombs and pretty much anything else on the exterior. It does both a great Rinseless as well as waterless.

Really enjoy your channel and the info is great. Thanks so much. One recommendation to try another new rinse less / waterless wash. It iscalled Ultima, I think a German company, and sold on Sky The Limit, Carpro based out of Florida. It is by far the best and lwaterless wash I’ve ever used. I have tried ONR, McKees, hero, lab, cosmetic, DIY detail, And Ultima is by far stand out the best! It really excels an interior light cleaning as well, great for bird bombs and pretty much anything else on the exterior. It does both a great Rinseless as well as waterless.

This is definitely not a product that you want to let dry as it has a stout protective element. It is a wash and protect product. And a point of clarification: not all polymer rinseless washes are protective. Most (ONR, Absolute, etc) do not provide any protection.

Thanks for the video. I wish you had compared the brass OG to the Eley. That is one of the most important parts of the hose. But thanks for the update, I now know you have a blue hose.

The polymer in Idrosave is very stout. They have since revised their instructions on use as mentioned below - best use is panel by panel. I think Labo wanted to over deliver on this product and may have missed the mark - this product is more of a wash and protect like yellow ONR for example. There was a lot of confusion prior to its release on this very topic as most people doing Rinseless want only a cleaner and leaving little to nothing behind. They have since released Preludio - alkaline and acidic which is sort of a prewash/3 pH system to be used in combination with Idrosave

Hi There 🖐 I believe that this version of Idrosave was designed as a panel by panel rinseless; using it this way would prevent the spotting.

Let’s go bro I needed this video. Perfect timing thanks

Have you tried Technicians Choice 582 1:1? I use it as a drying aid and it’s so good. Not the fanciest looking product but damn it’s good.

Hi, really nice video! I have a chance to get one mini clubman s 2017 with 72000 miles around 13000$. Should I get that? Is it a good deal? Should I be worried about the engine? No accident btw. Let me know, thanks a lot!

Thanks for making this video! I like the Obsessed Garage labels, but they don’t cover everything. With this setup you can customize what you need and it all matches. That simple black label is sharp.

I knows it’s a thing now but I can’t imagine having a car without an oil dipstick. How often do you use the lift and is it worth the investment in your opinion? Thanks

Please show 2019 jcworks automatic transmission fluid change godbless you 🙏

Also please feature how to replace transmission fluid. Thanks again and godbless 🙏

Please resend the link, can't 👀 them

Omg your pug phone rest!!! 💞💗💓I have two pugs 🐾🐾

My personally I had very luck on just doing drain and fill instead of flushing But there some old ATF fluid in torque converter and clutch act as friction My service interval was coming up soon 20K miles 2024 Countryman just doing drain and fill instead of flushing it completely My experience on transmission flush on Nissan Rogue was awful it slipping it won’t go into gear unless if I floored the gas pedal 100% full throttle get it moving 😂😂😂😂 it happened 2023 when that car was last used been sitting garage never used again

Digging the cow slippers 🐮

I really enjoy this long video format! Great content as usual! Can't wait for you to get into Porsches!