Видео

You do have to drain the oil first, Man I can’t wait to see your bike run I’m pumped

@Xr150hobbys oh okay, that’s what I had figured but it wasn’t shown in the video. I think you may have a separate video though showing that already. Thanks man!! I’m super excited too but probably need to wait for taxes before I can afford the machining and WPC treatment.

@@DustySteel I’ll bet you should do a brake down cost of you bike when your done

@Xr150hobbys possibly. The dealer that I bought these specific parts from doesn’t have a storefront and so he may changes prices the more people ask him for parts. I could however make a video of a kit that’s for 70mm.

@ yea that would be amazing you could help a lot of people that want to do it but are scared to get the wrong parts I just experienced getting the wrong parts last night with some clutch springs

I meant go kart*

@@smokeyi477 what tires you run?

Can I get that o Amazon ?

Also what does a flat top do? M happy with the top speed really wold like ore low end

@@Xr150hobbys just like a thinner head gasket, it adds compression to accomplish what you're after

OMB warehouse is your destination

@@jamesfalvey77 that’s would be perfect!!!! I’m starting to build a 2 kart and then I’ll get on that thank you so much

Thank you so much ,the rear brake control is so hard for me ,I end up hitting it to hard and instead of floating I bring the front end down to low

Also the bike your on has engine break so Whenever you are trying to start riding the wheel get it to balance point, and engine break will bring you back down then give it just a lil gas and it will bring you right back up.

@ maybe l need to focus more on that and no so much foot break. I can get to balance point now but I’m having trouble keeping it there .im not scared to loop out but I would really like to do a slow controlled wheely

It kinda looked like someone had been sleeping there

looks like Hurtgen Forrest in Germany

Welllllll lol you would be wrong it is in the USA,if you looking it up its called camp Claiborne ,address LA-112,forest hills,LA 71430

@@Xr150hobbys then why u dush dont took it in the discription first time???

@@ludachris6086 I’m new at this and still trying to figure out how it works.but still learning.whats a dush?

@ and I didn’t put it in the description for engagement.RUclips likes it when people comment.and with me being so small I thought if I left it out and someone really liked it and wanted to no what it was they would ask

Thanks man ,how your bike running

@Xr150hobbys right now I have it apart for the 300cc build.

I think so too. B it’s odd because it was running good

I think it was,I cleaned it and now it’s working good

its fuel injection. that's what the 'f' stands for stupid!

Thants a really high jump I don’t think I outdone do it

Thank you so much I am truly shocked and grateful

@ lol that’s punny because your video is about new shocks… so you’re shocked!!🤣

@ I love it good one !

I have had complaints of the video being low quality so I have been really trying to edit and get the camera settings better This video was on the GoPro hero 12 with a ND #8 filter

lol wait till you see the new one,I’m ordering the parts now .same kinda of frame but front and rear brakes and a 459cc motor,with a 44” axle it’s should be super cool I hope it comes out good I haven’t started filming yet waiting to get most of the parts and I have a lot of other video to upload,been busy

@@Rambo-o4o8s thank you so much I do have more coming out.im editing it

Unfortunately not on that one the ground is wet in this area so they didn’t dig down much on the bigger buildings,I did find some smaller ones but they were full of water

I wish,but no it’s a protected area

@ that makes sense.

@DustySteel but is nice because anyone can enjoy it

Super scary when it blow

@ I bet!! I’ve had a rear tire on a vehicle blow out on the highway; it definitely gets your heart pumping that’s for sure!!

Thank you

It is! I’m thinking about making another one

@Xr150hobbys would be very cool to turbo one. I’m thinking about maybe turboing the XR after the 300cc build is done.

@ wow that would be amazing.its hard to find a good turbo tho

@@Xr150hobbys why is it hard to find a good turbo? Do you mean size or brand?

Thank you

Thank you

@@kylecarter8436 💯 I’m not sure why they put it so low .i do have a oil pump that makes it easier to

@@DustySteel haha I shot it on the insta 360 go3s But I think the problem was my memory was full and it wasn’t letting me up load in 4k

@@Xr150hobbys gotcha. I have the Insta360 4X that can shoot in 8k but it doesn’t have good picture quality when uploading from an iPhone. I need to try and use my computer to upload and see if that helps with quality. I’m glad you were able to figure yours out.

@@DustySteel me to I was nervous.i still have some lower quality videos to post but the bugs should be cleared up .im a big fan of insta now I may get one of there other camera and replace my gopro with it It’s so easy to use and they just did a update that I can overlay a speed on screen and I have some fun ideas for the go kart with it and xr

@@89itirish no sir.i try to find one and couldn’t find a good fit.also the rear isn’t as big a problem as the front I’m about 180 pounds and maybe have extra weight from gear of 10 pounds and the rear shock is ok I never bottomed it out. But on light trails I will bottom out my front that’s why I ended up going with the pvc which helps alotttttttt.and I have some heavyweight shock oil I will be adding

@@Xr150hobbys I’m a fat guy and bought this little bike to commute to and from work to keep the miles off of my Indian. I’m 280lbs so when I’m out on the trail it’s a little rough. Haha I’ve been looking for a while now but I can’t find a rear shock either. The pcv trick sounds like a good option for the front as it nose dives pretty hard when I brake with my fat ass on it. 😂

@@89itirish it doves really bad .i thought about trying to fit a crf300L rear shock on it but I near got to see if it would fit and I also thought about getting a crf150r rear shock it looks the same but the xr is heavier so I’m not sure if it would work

I did that video before you had mentioned it,I have found on what I was doing wrong it should start getting better

I have the Insta360 X4 that can shoot in 8k but I’m pretty sure you have to upload using a computer otherwise it doesn’t look very good.

@@DustySteel maybe that’s what I’m doing wrong

@@Xr150hobbys yeah, the quality is not very good when posting videos taken with that camera and uploaded from my phone to RUclips. I need to use the computer and save everything on the micro sd.

@@DustySteel I don’t have a computer.i do all the editing on a iPad

I used to stick weld when I was a kid and we would crawfish farm.but this welder is easier to use and cheep.a perfect starter

@@Xr150hobbys I went to school for arc welding but never did anything with it. That was years ago but I think I could pick up MiG or tig welding.

@DustySteel 💯 if I could do it you can Hardest part is the setting and you can look them up

@@Xr150hobbys for sure! I know I could figure it out.

I got it off of Amazon,I paid $375 it’s the 65gb because normally when I go out I can fill a 65gb so card and I also got the quick reader so that I can dump the video onto a sd card and not my phone so far I love it for quick video are quick trip or Fpv ,and the quality of video is shocking good not GoPro quality but still good,I don’t see it replacing my GoPro but its really nice having something I can throw in my pocket and go film and I don’t have to worry about breaking the screen,I would never put my GoPro on a drone but this one I would,but definitely get the 4K and the quick reader

North Louisiana

I don’t no how,I will try to lean,thank you for letting e know about it I had no idea

@@Xr150hobbys Check your camera settings to see if you are recording in 2k, then get a free video editor like DaVinci Resolve, real easy to do simple editing , that's what I use.

@@TinShackVideos I’m using the gopro app on iPad .im still looking into it I think it’s when I’m uploading I’m not doing it at 4k because camera is set to 5k

Thanks 🔥

Thank on so much,I am trying to stay as safe as a can so far it’s going good,I hope I can get it down one day

Thank you so much!!!

Well I have done more research,and I feel confident that I could do the work,but I really do like the bike how it is ad I’m worried I wouldn’t like it

@@Xr150hobbys I liked it so much that now I’m going even bigger. It’s definitely not hard to do unless you go bigger than 70mm. Even if you go with just that; it’s worth it. Makes it way more fun. Replacing the head is really just if you want more top end power for higher speeds. If you had a bbk then you wouldn’t struggle as much going over things or turning around on the trail. It’s really nice honestly.

​@Xr150hobbys I am in and out near your area fairly often and would be happy to help you do a BBK conversion if you decide to do one and feel like you need/want help.

@@Xr150hobbys the new 195cc kit by BBR looks like it has a few extra passages for oil cooling. That’s probably a kit that would last for a really long time. Makes me wonder about have some holes machined on the one that I got… if there’s room lol.

@MishMashMoto thank you so much for much for the offer but I think I will leave it how it is for now

That made my day,I laughed so hard.you are a 100% right

Thank you so much

God morning man

@@DustySteel I’m didn’t mean to

@@DustySteel thank you so much

Good morning bro,do you ever go on trails with your bike

@@Xr150hobbys no, I wish. I don’t usually take a lot of time for myself like I probably should lol. There’s a lot that always needs to be taken care of.

@@DustySteel I feel you but with out maintaining good mental health everything else falls apart around you

@@Xr150hobbys it definitely helps having a positive mental attitude. It’s my choice to not have time by myself because I choose to spend that time with my wife and daughter. I’ll take it out to a trail at some point. I also ride bmx and skateboard. I have a lot of projects also so I really have to decide what I’d rather do, which is normally to take my daughter to the park or play video games as a family because my wife and I really like doing that together.

@@DustySteel you sound just like me! The go kart I made was for my son and I don’t wanna video him but most of the time he is with me ripping around

@@MishMashMoto wow thank you you really no your stuff

@@Xr150hobbys Even a blind hog can find an acorn every now and then. 🤣

@@MishMashMoto you crazy lmao

@@MishMashMoto the pvc I added in the front has been working really good

@Xr150hobbys Eventually, I would really like to do a good front-end upgrade on mine, but in the meantime, I am planning to make some solid spacers and try it myself with some 15W fork oil. We wanted to ride them pretty much stock for a while. It's time to play around with it some now:-)

I like it a lot I have been looking into taking the crf150r shocks and putting them on the xr150l butttttt the rear shock alone is 950 that’s a lot ,I found on for my go kart and I’m thinking about trying it

@Xr150hobbys I agree, that is a lot of $ for a rear shock on a budget bike. It would need to be done correctly, but I think one could possibly install a CRF230 rear suspension. I am currently looking into that possibility myself. The front-end swap is almost plug and play from what I understand (tripples and stem fits from what I have read).

@@MishMashMoto I seen that but the rear I’m wondering about the weight of the xr my crf way less and I carry more gear on my XR I was playing with the idea of getting a crf300L rear shock and throwing that on it or a cfr450l I think those would b closer to the weight

@Xr150hobbys Check the mounting lengths on those shocks (I have not yet). My thought was mainly so a linkage type system could be used. This would require welding to the frame that would need to be done "properly". I glanced at my xr and didn't see any frame mounts for a linkage like a CRF230L has.

@@MishMashMoto good point I didn’t look into it either just a idea

You’re so welcome that what it’s all about.like minded people coming together to share our tips and tricks

I have some haven’t had a chance to do it

I do want a grom one day ,but I also want a crf450l

@@Xr150hobbys buying both is still cheaper than buying a car

@@newmobile1455 you are right I should You only live once

Lmao 😂 I’m not that good yet,I have a skid plate now on my bike so I do want to try it next time,I have done it on small logs but nothing big,I have been learning how to pop over logs and the next trip out there I want to do the single track and I hear you have to pop over the longs,so should be interesting

@@Xr150hobbys that’s still pretty good. I’ve only ever gone over large street curbs lol.

@@DustySteel thank we will see what I can do when this rain stops and I can make it to single track

You’re probably right! I let all the nitrogen out and it felt the same,still a lot better then stock but it’s definitely not high quality

Thank you so much

@@MishMashMoto what’s up mishmash y’all put out some good content on this bike as well. I think this young man is going to do well on RUclips.

@@HoHoMoto We agree 👍🏼👍🏼

@@MishMashMoto y’all going to the Smokey mountain small bore in June 2025? Sure would like there to be a pack of XR150’s there instead of seeing just 1 like this year. Come join us. We can ride the smk bdr :)

@HoHoMoto That sounds like some serious fun, and I would like to do that. I can't commit us to that right this minute, though (lots of variables for both her and I right now). Let's talk about that again at the end of September and see if we can lock it down. Maybe we could head up a little XR150L posse for that event.

@@roberteddy1951 about a 1 and 1/2 inches If it’s to long you will know easily because it will be to hard to screw the shock cap back on . But the difference it makes in the off road riding is amazing.you can notice it the most in the turns you will be able to take turns way faster

@@Xr150hobbys did you change fork oil as well? I bumped up the weight oil in the grom forks and fixed a lot.

@@HoHoMoto no I haven’t yet.i get some heavy weight oil in my shop but I have been working on the dirt bike and now I’m on the go kart but when I get done I am planing on trying it out.i think it will make it better but I still like the feel on the pvc so I may the oil and a 1/2 pvc

@@Xr150hobbys well, I definitely can’t wait to put the PVC in mine because you’re right, in the corners especially in sand. You gonna post anything about the go-cart?

@@HoHoMoto 💯 the sand is what made me want the front stiffer I am I didn’t film a lot of it sadly I didn’t think people would like it but it seems I was wrong so I made some video of me doing upgrade to it .i did a head gasket.seat belt shocks and made some video of me riding it .its so fun And I just got my dirt bike up and running and I’m finally getting good enough at wheelies to make another video on it I was waiting till I got better to see a improvement and then my dirtbike started giving me trouble