Видео

It is recommended to clean the filter after the notification or once a week or every 2 weeks depending on usage. This is not a standard dryer. We have done extensive testing on the airflow with a clean filter and one after 12 loads. The airflow was the same, the amps did not increase on the blower and the clothes were dry. It is extremely important to clean the filter tracks, upper, lower and rear EVERY time you pull out the filter. Lint / Debree will drop off the filter and fall onto the rails. If you do not vacuum the rails each time, you will push the lint to the rear and ultimately onto the Coil / Condenser. Out kits stop 99% of lint from getting by the filter. We also have a proven Flush Method without taking the machine apart. It will clear most if not ALL lint buildup on the first flush. RUclips: Home Guy Customer Service HomeGuySolutions.com for products. We are also available by phone. John HGS

Thank you for the video. I started to get the 353-fault code. Called GE and they had to send out a GE certified technician. They had to replace a part. It took the technician about 4-5 hours. The technician ran the machine to get it to reset. After it finished, I got the fault code 354. We ran a small load of laundry and now will not go into drying mode and giving the error code 353. I cleared the fault code and tried to run another small load. Again, stopped after the washing of the clothes. Would not go to drying and fault code 354. Now we have a really expensive washing machine.

I clean the lint out every wash. Mine has never looked like that. My machine will be a year old in September.

The wet vac is genius! I stupidly didn’t get a pedestal and have to put a plate under the filter door with a folded microfiber I wring out a couple times to deal with the water that comes out. It’s fine to do 4 times a year or so but I’ll switch to the wet vac that looks easier.

It never ceases to amaze me at how nasty people let these machines get before they give them the attention that they need. These machines are great but they do require more care than a regular washer and dryer. I clean my lint filter after every load and everything inside that area including the coil still looks brand new.