Видео

How to jump start street 500 2020. Looks complicated after opening the seat cover..

I hate wiring it does my head in buddy. It takes a lot of hunting around i use them connection with a bit solder i find them good enough so nothing wrong with it. The loom looked a lot better at the end 👍

That’s why men invented beer Benno, after a bad run like that you just sit in front of the fridge till you pass out 🍻. On the brighter side it wasn’t a complete melt down 👍

That’s sucks mate.

Hey Mate, you are just so talented, I didn't know you could sing as well 😎

Nice day for boating 👍. Hopefully next time you get some keepers in the crab department 🍻

Looking good Benno

Nice hat Benno 😎✌🏻

Is that the Bohle?

Hey Benno, just found your channel, been binging 😀. Re scammers, years ago I used to watch an internet site called “ 419 Eater “, I haven’t looked at it for years, but wow what some of the baiters did was insane. Trying to follow the 80 build, but gets a bit disjointed. All the more reason to sit on YT. Cheers

Cracker day on the water mate 👌

Looked like a great day mate . We don’t have water koalas down here in South Australia 😂. I will steer clear of the crocs. , man that was big croc 😎, stay safe and don’t get eaten. Almost some dinner.

Got the Skid Pig with you! He was one of inspirations for a track on my newest record. Called Queensland Calling. ruclips.net/video/5auUijaMHKQ/видео.html

Nice work Boyz, cracker crock 😎👌

That’s a pretty big croc 😳

Nice one Benno 👍

Coming along nicely Benno 🍻

Woohoo fire in the the next episode 😎🙏🏻

getting there mate . more patients than i have . well done .enjoying the build

Wow, very expensive for plastic 😳

I know what you mean about them electric connection the heat just kills them. Lack oil pressure seems to be issue i know when i did the Astra i had to replace the pressure sensor but it can drive you wild.🤙👏

You gotta love it when shit just doesn’t want to play the game right. Your getting there Benno it will all be worth it when your pulling smoke runs up the drive way 😂

Getting closer Benno 😎👌

Well done mate.

Nice work there Benno buddy. 👍

Looks mint mate guess you've done this a few times before hahahahaha

G'day Benno mate nice hat

Coming together Benno 😎👌

Good work Benno, might be just me but the back ground music sorta made it hard to hear you talk.

It shouldn’t be too hard, if your the clunker who pulled it apart with the benefits of photos. It’s a real pain when restoring someone else’s rip tear bust.or you’ve left the job so long that you can’t remember her name situation. I just recently had to change the locking module Grover on the latching mechanism. If you need one of those, shop around ,eventually found one $20🇺🇸 and $25🇺🇸post, yeah so $67🇦🇺, beware there are x5 types one for each door and hatch.-dudes

Fella- Fank Tuck an Aussies done a video on this, Frigg’n yanks wank on way too much verbal diarrhoea, good to now know to crack that 17 first and shop air blow crap out of the way, just waiting for a new pump coming from QLD, as my EFI just blew for the first time ever, last week, it now pops every ten seconds on a 15@ or 2 seconds on a 7.5@, disconnected the pump and motor runs idle longer than 5 seconds on the 7.5@ so you can safely presume with me the pump or thereabouts is cactus, but I did realise the warning lamp low fuel came on a couple of days ago and was still on at full click. 1996 fzj80 , probably give the sender a hard examination or remove all together, got LPG, and to be honest only switch petrol when that’s evaporated or towing big up mountains. Fella, buy some alligator clips eBay, make yourself some mini jumper leads for future jobs, dead handy for all kinds of nifty checks, also thanks for the heads up, seeing how full of crap it was in the soup, now I won’t be so freaked out if I find the same, waiting for delivery, got rear left on a car ramp accumulating? Water into corner of tank, if any, I’m expecting a lot of shit fuel in it. Cheers

Nice one. I've been refreshing all the door and panel pieces / cards on a 90s Toyota camper van (I think there are nine on my van in total). Some were a bit sad but they all cleaned up fine and the foam had survived, though it's a bit old in places. I was impressed with your work on these and they will be amazing. Where I had degredation in the cards backing panels I used CA glue to re-strengthen and re-bond any damaged areas on the insides. THe cards took the glue up very well. Then, I varnished the backs, using loads of coats. I used a polyurathane marine varnish with the first couple of coats very thinned (maybe 50-75% thinners). This soaked deep into the fibres but not through to the visible sides. I then did a load more coats until the last ones wwere just thinned ~10 as normal. I think I maybe did 6-8 coats in total and had a bit of a production line over about a week, doing a coat each day. This has made the cards nice and stiff and basically wwaterproof. I wanted to keep them original if I could and these are now good, hopefully, for the next 30y. THe final job I need to do with them is to re-glue a bit of the vinal to the tops of the cards where it's come adrift from the metal trim places in some points. I think I'll use a contact adhesive for this, some spring clamps and thin pieces of wood to spread the load. Thanks for your vid. Keen to see how they come out!

Oh yes. Well done. Thank the gods.

Oh no! What a giant let down. Watched every vid since the start of the 80 and now you just doing an engine swap.

I've seen someone selling the bare door cards on ebay. "Australian door cards" in Wangaratta. $149. Cheap enough if you're time poor. Just remember to put the plastic sheet back in and seal it otherwise it will get water damaged again. Also another hot tip while you're in there: pull out the window rubbers, scrub them clean and give them a squirt of silicone spray or sellys ez-glide. Service your elec motors and regs. You'll have fast glass.

Almost there mate cant wait to see how many spare nuts and bolts your left with in the end hahahahaha

G'day Benno maaaaaaaate 👍

Wow !! You're a pretty handy guy, Benno !! :) Cheers !!

You definitely have a knack at taking on odd jobs well done on that trim. Chuck some spit on that engine and jam it in the hole Benno 😂

Oh heck yes! Good to see Benno at work...good tunes, too! You have some serious skills, buddy. 😎

Pretty awesome i would have messed it up for sure trim is not my thing nor is wood😂😂.

Nice work Benno getting your money’s worth out of that printer

Good to see you again Benno. Steady steady the ole girls coming together 👍

One day, one day, you will driving this old girl. You might do a little side business with those hard to source plastic bits...

Sure is handy having that printer mate.

Perfect and adds a bit of bling as well, nice colour 😀

Awesome work buddy 😊👍🍻

Printers are awesome, Couldn't do with out my 4. 🤣 Great work.

Well done looks great

Awesome. A few bucks in plastic is better than paying the dealer's ransom. Cool usage of under the shelves.