![Quickjack Europe](/img/default-banner.jpg)
- Видео 7
- Просмотров 48 456
Quickjack Europe
Нидерланды
Добавлен 27 янв 2017
www.quickjack-nederland.nl/en/
QuickJack TL Series coming soon in Europe!
The QuickJack TL Series is the long awaited successor to the QuickJack SLX models.
Improving on the SLX design the TL gets you an extra 8cm of lift height, providing up to 61cm of total lift height.
Additionally, the TL has an improved design with a more robust build and relocated cylinder allowing an obstruction-free lift tray. The TL models maintain the same strength and reliability that QuickJack has become known for but give you even more clear undercarriage access making it easier to tackle the tough jobs!
www.quickjack-nederland.nl/en/product-categorie/quickjack-tl-models/
Improving on the SLX design the TL gets you an extra 8cm of lift height, providing up to 61cm of total lift height.
Additionally, the TL has an improved design with a more robust build and relocated cylinder allowing an obstruction-free lift tray. The TL models maintain the same strength and reliability that QuickJack has become known for but give you even more clear undercarriage access making it easier to tackle the tough jobs!
www.quickjack-nederland.nl/en/product-categorie/quickjack-tl-models/
Просмотров: 11 788
Видео
How to operate the Dannmar DT-50A Tire changer and MB-240X Wheel Balancer.
Просмотров 3,5 тыс.2 года назад
A short video to get an impression of the Dannmar DT-50A and MB-240X tire changer and wheel balancer combination. With this all-in-one machine, you save a lot of space in your workshop or garage at home! Interested? For more information visit: liftmotive.com/dannmar-europe/
QuickJack Mobile KFZ Scherenhebebühne Portable Car Lift Le Pont Élévateur Mobile Hefbrug Autolift
Просмотров 5082 года назад
FREE SHIPPING IN EUROPE! www.quickjack-nederland.nl/en/ Simply put, QuickJack has done away with the need for jacks and stands-period. QuickJack handles the lifting and safe-keeping of your vehicle with the simple push of a button, and there are no crossbeams on the ground to get in your way. Each of the two frames feature automatic locking bars that are essentially "jack stands" built right in...
QuickJack - How to operate the QuickJack Portable Car Lift, Easy, Fast and Safe!
Просмотров 10 тыс.4 года назад
This is an instruction video about how to operate the QuickJack portable car lift step-by-step. 0:00 QuickJack Wallhangers 0:12 Roll frames into position 0:17 Connect the hoses 0:50 Connect the power outlet 0:55 Drive vehicle in position 0:59 Position frames and lift blocks 1:10 Press the UP button 1:21 Lower into Locking position 1:32 Lift out of the locking position 1:54 Remove frames ALWAYS ...
Quickjack (unofficial) FAST first time setup,how to bleed the system and more! Bleeding Trick!
Просмотров 12 тыс.4 года назад
This is an unofficial instruction video about how to setup the QuickJack portable car lift step-by-step. 0:00 Unboxing box 3 (power-unit) 0:30 Prepairing the hydraulic hoses 3:00 Prapairing the hydraulic power-unit 4:57 Unboxing box 1&2 (Frames) 5:55 Preparing the Frames 8:17 Bleeding the hydraulic system 11:33 Fill the air bottles SELECT SUBTITELS FOR INSTRUCTIONS Download the latest manual: w...
Quickjack - Can you put QuickJack on a Four-Post Lift?
Просмотров 8 тыс.5 лет назад
Quickjack is avaiable in Europe and can be ordered at www.quickjack-nederland.nl/en/ Here's a video how we used a Quickjack Portable Car Lift on a BendPak HD-9ST Four Post Lift. Phase 1: Get a QuickJack Portable Car Lift Phase 2: Add a BendPak Four-Post Car Lift Phase 3: Combine Previous Steps Rolling bridge jacks are the official wheel-lifting tool of four-post lifts. The QuickJack method is s...
Www.quickjack-nederland.nl Bendpak Quickjack BL500SLX Mobiele hefbrug portable carlift
Просмотров 2,1 тыс.7 лет назад
Available in Europe! Order now on www.quickjack-nederland.nl!
My QJ are never going down when there is no weight on them. I did the bleeding procedure 10 time, there is no air in cylinder. The title tanks are at 50 psi.... Help
Hello i bought the 5000TL what size of wrench do i need? Are thisi EU sizes or US?
The tools we use in this video are: 22MM Wrench - Fits on Hydraulic quick connectors 17MM Wrench - Fits on Hydraulic Hoses 18MM Wrench - Fits on counter nut on elbow fitting 3/16 Allen key - Fits on Bleeding bolt
@@quickjackeurope thank you very much
I downloaded the manual (sept 2023 edition) to check the bleeding procedure. Pg 31-32 states to loosen the screws (don't remove them)press up switch, bleed air from system, tighten screws. None of this up & down bleeding as seen in all of the home videos.
We (QuickJack Europe) have consistently followed our preferred method for bleeding the system, but as an independent company, we are unable to officially advise or alter the manual according to the manufacturer specs. However, QuickJack USA has updated the manual, and the latest version aligns more closely with our recommended approach :)
As a heavy industries mechanic I was wondering why one one pulled the bleeder screws for the initial filling of the hydraulic system. You did it exactly the same way as I would do a system bleed on the QJ.
I guess if you didn't buy a two post that would work
Should we film an installation video POV style without any edits? Leave a comment!
yes
After you bleed it this way, when you added more ATF to the pump, did you only put in the amount that was lost when you were bleeding? Or more? Also, when you depressurize the hoses when putting away, does the ATF stay in the hoses? It all doesnt drain back into the pump does it?
Q: when you added more ATF to the pump, did you only put in the amount that was lost when you were bleeding? Or more? A: Before bleeding, all hydraulic lines / part of the hydraulic cilinder etc. are empty and filled with air. The amount of fluid you add after the bleeding, is the amount of air you replace with oil. (roughly its 2L reservoir + 0.3L after bleeding) Same Would be when doing an oil + filter change on your car, when you fill the oil to max and start your car first time, you have to refill some oil to reach max again, because the oilfilter was empty (air) and when started first time, filled with oil. Q: when you depressurize the hoses when putting away, does the ATF stay in the hoses? A: Yes, the hydraulic system is a closed system so the oil will stay in the hoses and frames (cylinders) Q: It all doesnt drain back into the pump does it? A: When lowering the QuickJack, the hydraulic cylinders pushes oil back into the hydraulic power-unit reservoir. When the cilinders are completely retracted, your reservoir will be full with oil, but the hoses and cylinders will still have oil. hope this helps!
I solute you! The bleeding air part is brilliant. Worked perfectly for me. I'm honestly amazed that QJ USA doesn't update the instructions. Every owner needs to follow this video. Set up fast and easy! Thanks!
Thank you for your positive feedback!
Just got mine here in Japan (I think the Japanese seller has a connection with Costco). Everything had already been done, all the connectors to the hoses with teflon tape, air-cylinders pressurised and the hydraulic cylinders bled. Fluid in the tank too. I have no idea if QJ are doing this at the factory now or it's being done by the Japanese seller but it saved me a whole bunch of work. :) No evidence it was a customer-return unit.
Very good video! Even better than the official video.
Thank you for your positive feedback!
In the QJ manual, it shows the air cylinders being filled before the bleeding process. Does it matter the order of this? Also, the manual says to fill the air cylinders with 40-50psi. On this video it looks like you're barely getting 5 or so. Or am I reading it wrong? Great video otherwise and this bleeding method is so easy.
The order doesn’t matter as they are two separate systems and the measuring gauge is in BAR
Does it always need to be connected to power? Can I raise it and then unplug it? , as the power point is not in my garage.
No, once the QuickJack is locked into the safety locks, you can unplug all hydraulic and electric to get it out of the way!
I need this!
i have the 5000 TL arriving soon, is the bleeding that simple? --> open screws same time, power press "up", fluid comes out, plug screws? that's it? bleeding is 100% done? please confirm thanks.
it is that simple!! and don't forget to refill the reservoir after doing that.
@@quickjackeurope thanks for the "quick" reply. one more Q: do the lifts have to be elevated at all or just lay flat? thanks.
@@GrabberBlue5.2 no ''problem''. the frames needs to stay down.
@@quickjackeurope ok so they lay flat. also, do i need to plug the screws FAST so that the fluid doesnt keep coming out? or will it stop on its own?
@@GrabberBlue5.2 You don't need to do that fast. if you place some rubber blocks under the rear side of the frame, the highest point will be the bleeding holes. once you stop pressing ''up'' the oil will not flow out anymore. 99% of the air is gone and just reassemble the bleeding bolts without any rush.
Just music and no instructions. Too vague.
It's an impression video, not an instruction video.
@@quickjackeurope oh, I guess the "how to operate" title threw me off....
Can you please confirm that this procedure would work too bleed on USA models #5000, looks basically the same but easier... What's your opinion?
Yes.. US , Europe all the same. You can use this bleeding process.
This is simpler than the USA version for sure, and make sense, because you push the fluid out, and fill the lines at the same time. It's like a brake flush procedure. Great job guys.
Thank you for your support!
What if you want to use a single ramp, instead of both. Will the pump work, just connecting one single ramp?
This won't work: The power-unit is designed to equally flow fluid out of both connections, when only one port is connected, it won't flow oil at all.
Recently purchased a 5000SLX. It's too short for my 2020 Civic and 2018 Camry. It is almost too long for my 2010 Grand Sport. I will probably be returning it.
This is exactly the idea I needed to see. Perfect.
I had an online chat with BendPak about the topic this video shows. Putting a Quick Jack an a 4 post lift. I was told no, cant be done. The person I was chatting with I assume did not understand my question or was reading from some script. My Quick Jack is the BL5000 unit so it can only lift 5000 pounds. The 4 post lift I'm looking at is the HD-9 which is a 9000 pound lift. I do not see the problem and this video put out by Quick Jack and demonstrating on a Bend Pak 4 post lift is perfect. Both products have the same parent company.
The thing is that the middle of the runway is not designed to hold that kind of capacity.
As in the field of engineering, products are designed with something called a safety factor. A typical number used for this is twice the rating. Or you could calculate a free body diagram and input the length, width, height, and thickness of the runway and use a common steel, then you could calculate the weight where bending will occur. I'm sure BandPak can input the information in CAD and let CAD perform an analysis for this situation. Seeing this video is over 2 years old, I'm surprised there are only 7 comments and that BendPak has not seen this and had it removed. By letting this video exist is kind of saying this is acceptable.
@@RacerX531 Maybe this is helpfull for you; www.bendpak.com/blog/quickjack-on-four-post-lift/
@@quickjackeurope thank you, very helpful. The safety factor is 3X not 2X. Plus that link explains how the Quick jack spreads the weight over a larger surface area. I enjoy facts over opinions. Thank you again.
I couldn't just grab and muscle up my 7000 EX like that, I guess will need about 2 years of weight lifting training first...
You can use SUV adapters as dumbells and before you know it you carry that 7000EXT like it's a feather!
As a plumber I noticed your the only person doing Quick Jack videos who knows how to apply teflon tape.. Lol..
Call us if you need your bathroom remodeled :D
@@quickjackeurope LOL...
Beautiful! Thanks.
Thanks for the demo. I knew I should have bought the lighter weight quick jack. :D My 7500 lb. quick jack takes much more muscle.
Mooi en duidelijk filmje👍🏻