Видео

4:55 you lose your clip! If you're gonna do that, I wouldn't use a clip, I'd use a reusable heavy gage zip tie, or a velcro for cable management.

Have you had any issues with the joystick freezing up? How's the shear pins? The worst part of the Honda blowers, in my opinion you have a tank but the smallest pins in the market.

This wheel kit is no longer available. Hondo now only offer 1 4wheel kit for the EU3000 & its 4 fixed wheels.

I owned a 1997 John Deere STX 38 and wondered about those hydraulic valve lifters

Got a wheel 28. 2005. Kick ass machine . Nothing like a Honda blower. Nothing.

Looks like it just swallows the snow drift.

I have the same blower. It will move a lot of snow and I’ve never plugged it. Downside is 7 levers and only 2 hands! Also not as maneuverable as my old Deere 826 wheel machine.

Great machine 👍 I have a Honda HSS724, this monster of a snowblower has never let me down in our Canadian winters, it is more efficient than my previous MTD 28” 9hp blower, I always use highest octane gas with fuel stabilizer in all my small engines.

I'm having same issues with my cub cadet lt1040

loves a full bucket. Put that thing to work as I do and have a HSS928

Watching a different channel I discovered that gasoline jelllies in fuel filters if it is cold enough. I wonder if changing it would help ?

Surprised it wouldn’t just go thru. I own a 1332 but my driveways on incline. Maybe that’s why

Very well-explained and demonstrated! Thanks. 🇨🇦

How does it handle wet slushy snow? Chute get clogged? No heated hand grips or fuel gauge at this price point or hour meter on the 28 inch model is a joke.

Those are some serious snow drifts! I ordered a 928 this morning.

I'm debating between the Ariens PLATINUM 28 RAPIDTRAK SHO Model #921057 or the Honda HSS928ATD. I get wet slushy snow at times, too, and my current two stage Simplicity Snow Away 7 gets clogged, and I'm tired of it. I did think about buying a single stage for the slushy heavy snow also. Any thoughts or recommendations?

I have the same and it loves a full bucket. Throws it farther

Up next, comparing Grandpa's push mower to your John Deere riding mower. 😂😂😂

Just aquired one for free.. needs a new combination relay... to fix intermittent starting issues... well engineered for sure.👍🤠

Great video!

The black flap behind the unit is made to be tucked inside

I see comments pointing it out, of course the Honda is bigger but Honda's don't get much smaller either, even if you could find one the same size it's still gonna be better. Add to that the 928 is known as the worst performing Honda of them all too with the smaller carb jet's, and who's gonna pay you to get a Honda the size of that Yardman? Taking that into consideration, all in all this is honestly as fair a comparison as it's ever gonna get considering the Honda's most people have (928 approaching the minimum size now anyway). Just get a used 928, use it and maintain it correctly and you have a machine that'll last you. Yes you could get a Yardmax or Ariens or w/e, and use up 3-4 of them, but when it fails, which it will, it's gonna fail when you need it the most.. In the middle of winter, in a blizzard, when snowblower prices are soaring, glhf with that. Quality blower means it's gonna keep an exit open for you, people getting into their 60's and 70's, especially living with a wife, one or both bumping into one or two health problems, will know exactly what I'm getting at here: When you're young you can be stingy and learn the lesson the hard way, when you're in advanced years you can't screw around anymore.

It's nice watching this cuz I have the same blower but it has never been used cuz I have a guy come and use his blower which is easier since I'm 80 years old but it's there if I need it.

I keep hearing one pull Hondas, I’ve never had that happen. Snow blower and lawn mower takes several pulls to start with regular maintenance etc.

That machine looks brand new. Thanks for posting.

Fellow HSS928ATD owner here. Give some thought to fitting a pair of drift cutters. You'll have an easier time of it, and the blower will make a better showing of itself for the sake of posting videos on YT. Honda-branded cutters are available at your local pro OPE dealer, or online. There's also the Husqvarna drift cutters, which are adjustable via wing nuts and are also a confirmed fit. Just a suggestion.

Saved me time and energy, thank you

I have the same machine and just love it, I also drive a full electric vehicle and live in eastern Canada and have some pretty nasty cold weather, The last time I checked the battery on my car is not quite the same as a cheap go-pro and is doing quite well driving in the winter.

Thanks for the tip on the skid shoes! My 928 only came with the rear skids and will add the fronts for more protection

Funny, I have the same Stihl blower and a Honda HS 928. Both are great!

Asbestos you were handling there at 35:00

what engine is in the 4518? if it's the gx360, what did they do to get more power, assuming the '18' is the power? i had a 3813 back in the day. worked great except the stupid clutch delay eventually drove me to a hydrostatic.and the open diff caused some problems at certain points on my property. do not regret that decision one bit.

You'st a little info. You should not engage the drive lever unless the hydrostat is in neutral. The you adjust hydrostat. When shifting from forward to reverse ore reverse to forward you should always stopp i frew seconds in neutral to avoid damage to the hydrostatic. Best regards from a dude in Norway.

ця чашка, що лежить у фільтрі бака має бути прикріплена виступом на дні до отвору в кришці бензобака. на ній чотири позначки, які показують норму масла у відповідності до кількості бензину. бак на 4 літри, тому позначок 4. коли чашка приєднана до кришки бензобака, нею буде набагато зручніше користуватись, та вона буде вийматись разом з кришкою..

I purchased the tired version of this guy. I’m excited to fling some snow this winter.

Pretty sight to behold

I have a 38172

Is there a filter on transaxle?

Where did u get the carb?

A toddler can throw 2” of slush like that with a shovel. Maybe you could test it out on something a little more substantial?

I have a Top Flight 826. What is the right carburetor for this In

I was always considering one of these Chinese snow blowers with the LCT on it just worried about parts and availability. But every new MTD is practically the same. It’s either one of these with a LCT, Snapper 1024 (which is same as Briggs 1024 which is also pure China) or a older more powerful MTD with a 8 or 10 horse Tecumseh or a 824 or 1024 Ariens to replace my clapped out worn out 5hp MTD that bogs over light snow even with it revving to the moon with the govoner by passed.

Pretty much have to cut the grass off of it after each use. They sell a lot of the parts for this on Amazon. Before I was paying a fortune from part sites online. Pretty much will need a new mow ball each year. Works great on tall grass in the TX hill country. Thanks for the video.

Looking like a nasty day .wonder if you done any thing with the 928 impeller kit or lager jet or anything else?

What kind of gear pulley is that? Can you provide name and brand part number anything to identify it? Thank you

The Honda snowblower is a much better product. However its widely known the Hss928 is Underpowered for what the machine is. Skip it and go for the 1332 instead

bro tryna touch the bird poop

i would link that throttle to the pedal so as the clutch goes in it also revs higher

perfect race mower

This model 135r I not know, the FSA135 I have it over 3 years have used and abused it over manufacturers recommendation never have a problem, wish I can say the same in regard to the batteries and I have them all from AP200 to AP500S.