Видео

@lard1892 depends what too much money is. But I like it.amd since i was able to remove and install it on another truck it isn't bad

@chuckycheeeese it depends what other features you have. It may be expensive to add it off you don't have everything. The trx just happens to have everything parts wise you need except the button. So it's a $50 add on.

@@robtankbuster5215 2502393TX7

@@robtankbuster5215 I have another video of me installing it

@@Touchedbyapriest well because of the gearing I don't feel in needs any more power down low

@@vfr800fi07 fair enough. I get my truck back after this 3.92 swap used ur videos as reference. I'm on a 8 inch lift on 37s. I'll have to test it out see how I feel. I wanted a Whipple

@Touchedbyapriest I'm not against screw type blowers ..i actually like them more. But taking off in the truck feels good off the line..just no top end power to me. I figured it would also be softer on parts..less torque down low

@michaelgordon2031 yes I had to take the coils out to pull the cover. It was waaaaaaay easier than the valve cover job.. the only pain is the egr valve

@@vfr800fi07 I’m trying to do this myself. As one of the local shops wanna charge me $500 for parts and labor

@@michaelgordon2031 it's definitely not a 500 job that's for sure

@@GabrielMartinez-io2pd pretty much yes..very easy.

@GabrielMartinez-io2pd it was the best thing..like set it amd forget it..LS3 seems way more reliable

@@vfr800fi07 that’s why I’m going LS3 tbh. People complain about it but my z06 had THREE LS7s drop a valve so I don’t see how throwing another one in makes any sense lol. Gonna do an LS3 with an LS9 cam and a boost district LSA supercharger kit and call it good😁👍🏼

@@GabrielMartinez-io2pd exactly, you won't regret it.

@casmithc2 ill always have gas vehicle of some sort

@@taytung1 they should fit fine

@lucaslynch7867 i will soon. Since season is over. I'll be doing it over winter

There is a slight difference in sound.. but not like a straight up tube style

W10734521 Washer Clutch Kit... www.amazon.com/dp/B0CBCK8PTY?ref=ppx_pop_mob_ap_share

@@troycruse this is for the blackwing specifically

@@vfr800fi07 nice thanks for the quick reply. I was thinking I could throw this on my CT6-V but if I had to guess it won’t work.

No problem, I enjoy it. Thanks

@gcovete1642 thanks!

@marcprue the hots don't matter which side. The only one that matters is the ground goes to ground slot

@@meatball1080 www.americantrucks.com/air-design-ram1500-tailgate-spoiler-satin-black-ch07a16.html

@TheAeroegg the double sided tape is really not holding it as much as the rivets. The rivets really make it solid

@PedroPalmas-l6h what time in the video is the part your referring to

@@vfr800fi07 3:54

Thanks by the way man 26:59

@PedroPalmas-l6h let me see if instill have it somewhere

@@PedroPalmas-l6h 68442743AA

@@brk-thru4025 i mainly do my own cars, or friends cars

Well buddy I'm da process off getting one n most of them dnt come with tht kit n I like ur passion 4 what u are doing so we gotta link up n do business I'm close 2 u up NE lake n Muskegon Michigan

@@IanGuerrero-b5d no problem

@@shanes4x4 they do sell arms that are the same length as the longer ones..so they can be swapped out

@@monkeyone24 they are the same. No issues at all

@@monkeyone24 thanks!!

@@Jacksonslimenem44 Thanks!!

WOLFBOX G840S 12" 4K Mirror Dash... www.amazon.com/dp/B0811Q28N6?ref=ppx_pop_mob_ap_share

@@GoldenKnights50 Dash Cam Hardwire Kit,Type-C Hard... www.amazon.com/dp/B0B19LGTF9?ref=ppx_pop_mob_ap_share

I would say it's very close to that yes

@hungngo2216 thank you.. it's a 2023

I don't still have it.. but its.a decent motor. Engine output was more than the 5.7L version. I ended up selling the camaro and it went into a C4 corvette

@GHOST-666-LA-CA it tows better, and it also takes load off of transmission

@@vfr800fi07 got it. What gearing would be better than stock for drag racing?

@@GHOST-666-LA-CA i did a test..1/4 mile was identical.. mainly makes a difference under load

@@Dormantee nice you won't be disappointed..

@@BadTomzi no problem

Thanks..I am glad I can help

@benleone5800 you can get to all the bolts for the oil pan.. the only issue is how far it will drop down..I had the bolts out to do the camshaft. Amd dropped the front of the pan so I could pull the oil pump. Since the pick up tube bolt is hard to get at.

@@vfr800fi07 Thanks!

@benleone5800 if you bought loaded struts it shouldn’t take longer than 1hr per side

@benleone5800 thanks!!

@lpatierno84 I'm not sure..it never was dynoed.. based on how the car drove I'd say mid 300's. Probably 400 crank

@MrSully350 thanks again!!. This sounds awesome.. video doesn't really do justice on volume.. but it is LOUD.. but quiet mode is VERY quiet.. you won't be disappointed.

@MrSully350 thank you!! no problem.. this piece is of excellent quality.. the owner is wanting to do a front splitter soon. So we'll be doing that as well

@@vfr800fi07 I was on the edge with Anderson Carbon pieces; as they do state they do not apply a UV clear coat on their pieces. Unless you get it sprayed with a UV clear or PPF, and live in a sunny place, the CF coating it going to breakdown. That said, the piece does look great though!

@MrSully350 yeah this car goes out on weekends mainly..and is inside anytime is not being driven

@eightbitwhit you should be able to do it, as long as you have clearance to remove the plastic covers

@@eightbitwhit thanks

@sales007s8 not a problem

@@Cro_Bruh they should after you remove the stock ones

@mr2dsp yeah the front has a lot more involved to change it. If it wasn't extensive I would have done that too.. but possible warranty issues were brought up if you change it.

@@mr2dsp and I actually would not be afraid to tackle that job job, but I don't want to mess with any power train warranty

@@vfr800fi07 I had a problem with my right rear Inverter last time they replaced it under warranty and no issues on the rear UP stabiliser bar so far they did not give me issue thanks

@mr2dsp yeah I'm not worried about the rear at all.. the front requires you to drop the subframe

@@vfr800fi07 wow

The wheels were brand new take offs from another car. The car already had the updated steering wheel with the normal air bag horn. But it is something that can just be activated in the computer with tesla software.

@@mr2dsp no problem

@dale8081 yes totally worth adding them... thank you for the props. The car feels right now

@@Megacatares thanks!!!

Definitely way better than stock. I know he loves the way it sounds now.. much louder open and very nice closed

@casmithc2 this auto does shift pretty awesome

@casmithc2 this auto does shift pretty awesome