- Видео 86
- Просмотров 170 585
Balsa Aero Projects
Добавлен 13 май 2016
Building radio-controlled model airplanes from kits and plans with a few mods to arfs thrown in as well.
DR-107 One Design RC plane build, Update #23 Part C, Cowl Construction
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk.
This is the third and final video of a multi-part series on construction of the cowl. In this video, the two halves of the cowl are joined. Then, the cowl is mounted to the fuselage. Mounting the cowl goes hand-in-hand with adding the electric motor mount (firewall) so it is a combined operation. The cowl is mounted with steel angle plates glued to the cowl and screws attaching it to the fuselage (former F1) from the inside of the cowl. Thus, hiding the attachment.
00:00 Introduction
00:10 Gluing the top and bottom cowl halves together
03:17 Prepping...
This is the third and final video of a multi-part series on construction of the cowl. In this video, the two halves of the cowl are joined. Then, the cowl is mounted to the fuselage. Mounting the cowl goes hand-in-hand with adding the electric motor mount (firewall) so it is a combined operation. The cowl is mounted with steel angle plates glued to the cowl and screws attaching it to the fuselage (former F1) from the inside of the cowl. Thus, hiding the attachment.
00:00 Introduction
00:10 Gluing the top and bottom cowl halves together
03:17 Prepping...
Просмотров: 2 832
Видео
DR-107 One Design RC plane build, Update #23 Part B, Cowl Construction
Просмотров 2,8 тыс.2 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. This is the second video of a multi-part series on construction of the cowl. In this video, the cowl is created as a fiberglass part. 00:00 Introduction 00:10 Priming the cowl and fixing a problem 02:53 Prepping cowl for fiberglass and resin 04:33 Layi...
DR-107 One Design RC plane build, Update #23 Part A, Cowl Construction
Просмотров 10 тыс.2 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. This is the first video of a multi-part series on construction of the cowl. In this first part, the cowl is shaped using blue foam to make a plug. This plug will later be used to create a fiberglass part. 00:00 Introduction 00:10 Overview of plan 02:18...
DR-107 One Design RC plane build, Update #22, Priming and Battery Hatch Completion
Просмотров 2,3 тыс.3 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, the model is given a coat of primer. With this coat, a dramatic difference can be seen between the use of "peel ply" versus flow coat as regards to the application of fiberglass. A comment is addressed regarding the compatibility of dop...
DR-107 One Design RC plane build, Update #21, Covering
Просмотров 3,8 тыс.3 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, the model is covered with both fiberglass for the sheeted areas and Koverall fabric for the open areas. Before covering the rudder, additional balsa was added to fill out the width to match that of the vertical fin. The technique of usi...
DR-107 One Design RC plane build, Update #20, Finishing Fuselage Details
Просмотров 3,4 тыс.3 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, the remaining details are completed with the fuselage. The aft fuselage stringers are blended into the fin tail post to give a more polished look. The open, aft fuselage is stiffened by adding internal diagonals. Placement of the servos...
DR-107 One Design RC plane build, Update #19, Finishing details to Wing
Просмотров 1,4 тыс.3 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, the remaining details are completed on the wing. This includes adding laminated blue foam wing tips and using water-based sanding sealer to smooth the pores and create a nice surface to accept fiberglass or any covering. The fiberglass ...
DR-107 One Design RC plane build, Update #18, Tail wheel and semi-scale wheel control
Просмотров 1,4 тыс.3 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, the tail wheel is added and a semi-scale control function is added. 00:00 Intro 00:10 Adding the tail wheel mounting plate 02:18 Design considerations for directional control 03:08 A quick look at spring choices 05:19 Addition of rudder...
DR-107 One Design RC plane build, Update #17, Adding the tail feathers
Просмотров 2,2 тыс.4 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, both the horizontal stab and vertical fin are added to the fuselage. A couple of deviations from the plans are shown. A method of ensuring perfect alignment of the horizontal and vertical stabs is shown. All of this culminates with glui...
DR-107 One Design RC plane build, Update #16, Finishing the battery hatch
Просмотров 1,3 тыс.4 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. The motor battery hatch is completed. This includes cutting the hatch free from the fuselage. Then, flat hinges are added to one side. To do this, the original wire hinges are removed and replaced with one long wire hinge to aid in alignment. Then magn...
DR-107 One Design RC plane build, Update #15b, Building the belly pan
Просмотров 1 тыс.4 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. This is the second of a two-part series on construction of the belly pan. In this part the rear wing hold-down bolt conduits are added. Then, stringers are added along the bottom of the fuselage to include the belly pan. These stringers follow along th...
DR-107 One Design RC plane build, Update #15a, Building the belly pan
Просмотров 8864 месяца назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. This is the first of a two-part series on construction of the belly pan. As part of the belly pan, the rear wing hold-down mount is added. The belly pan sides are added. Before adding the top sheeting, the rear wing mounting blocks are added and drille...
DR-107 One Design RC plane build, Update #14, Fuselage construction continued
Просмотров 9995 месяцев назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, construction of the fuselage is continued. The two problem areas of the forward fuselage sheeting are fixed and part of the missing stringers are added. A trick for using baking soda to fill cosmetic gaps is shown. The forward wing moun...
DR-107 One Design RC plane build, Update #13, Fuselage construction continued
Просмотров 1,1 тыс.5 месяцев назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, construction of the fuselage is continued. The empennage stringers are constructed and the fuselage bottom is sheeted. A comparison of several different types of stringer construction is discussed before adding them. The fuselage is bro...
DR-107 One Design RC plane build, Update #12, Fuselage construction continued
Просмотров 1,5 тыс.5 месяцев назад
This is a series on building the DR-107 One Design (IMAC) r/c aircraft from the Matt Mrdeza plan. This plan was downloaded from outerzone.co.uk. In this update, construction of the fuselage is continued. The aft turtledeck and forward fuselage sheeting for the battery compartment is started. The sequence alternates between the two as one area is worked as the other area may need drying. The bat...
DR-107 One Design RC plane build, Update #11, Fuselage construction continued
Просмотров 1,2 тыс.6 месяцев назад
DR-107 One Design RC plane build, Update #11, Fuselage construction continued
DR-107 One Design RC plane build, Update #10, Fuselage construction
Просмотров 1,2 тыс.6 месяцев назад
DR-107 One Design RC plane build, Update #10, Fuselage construction
DR-107 One Design RC plane build, Update #9, Building Tail Feathers
Просмотров 7446 месяцев назад
DR-107 One Design RC plane build, Update #9, Building Tail Feathers
Brian Taylor Bf109E re-maiden flight video
Просмотров 5767 месяцев назад
Brian Taylor Bf109E re-maiden flight video
DR-107 One Design RC plane build, Update #8, Installing flap linkage
Просмотров 6157 месяцев назад
DR-107 One Design RC plane build, Update #8, Installing flap linkage
DR-107 One Design RC plane build, Update #7, More Wing Construction
Просмотров 7757 месяцев назад
DR-107 One Design RC plane build, Update #7, More Wing Construction
DR-107 One Design RC plane build, Update #6, Flaps and Ailerons
Просмотров 7387 месяцев назад
DR-107 One Design RC plane build, Update #6, Flaps and Ailerons
DR-107 One Design RC plane build, Update #5B (wing sheeting, part B)
Просмотров 1,1 тыс.8 месяцев назад
DR-107 One Design RC plane build, Update #5B (wing sheeting, part B)
DR-107 One Design RC plane build, Update #5A (wing sheeting, part A)
Просмотров 7238 месяцев назад
DR-107 One Design RC plane build, Update #5A (wing sheeting, part A)
DR-107 One Design RC plane build, Update #4
Просмотров 9248 месяцев назад
DR-107 One Design RC plane build, Update #4
DR-107 One Design RC plane build, Update #3
Просмотров 6448 месяцев назад
DR-107 One Design RC plane build, Update #3
DR-107 One Design RC plane build, Update #2
Просмотров 8719 месяцев назад
DR-107 One Design RC plane build, Update #2
Top Notch Lear Fan RC Kit Build, Update #5
Просмотров 2709 месяцев назад
Top Notch Lear Fan RC Kit Build, Update #5
Boeing B-17F Flying Fortress "Memphis Belle" video walk around
Просмотров 2,4 тыс.9 месяцев назад
Boeing B-17F Flying Fortress "Memphis Belle" video walk around
Martin B-57B Canberra video walk around
Просмотров 1719 месяцев назад
Martin B-57B Canberra video walk around