backontheroaddiy
backontheroaddiy
  • Видео 185
  • Просмотров 285 164
Pull ups in the TRUCK
In this video i am showing how to do pull ups in a truck, tractor trailer, semi truck. It was a very diy friendly idea i came up with using galvanized pipes that were part of a clothing rack that were thrown out. It is very simple and efficient for anybody trying to workout during breaks at work or while waiting for a load so we can develop good habits and use the spare time we have as drivers sometimes to keep our bodies and mind healthy.
Enjoy.
Merch
backontheroaddiystore.company.site/products?
www.paypal.me/Backontheroaddiy
Buy Me a Coffee ☕️ www.buymeacoffee.com/backontherf
#backontheroaddiy
#pullups
Disclaimer:
Welcome to my DIY channel! All the projects, tips, and techniques shared here are ...
Просмотров: 16

Видео

How to install VALVOMAX DRAIN PLUG
Просмотров 7828 дней назад
In this video i am showing how to install a valvomax drain-plug to a honda accord for easier oil changes Merch backontheroaddiystore.company.site/products? www.paypal.me/Backontheroaddiy Buy Me a Coffee ☕️ www.buymeacoffee.com/backontherf #backontheroaddiy #oildrainplug #valvomax Disclaimer: Welcome to my DIY channel! All the projects, tips, and techniques shared here are based on my personal e...
Center CONSOLE | arm REST COVER REPLACEMENT Honda ACCORD 2008
Просмотров 60Месяц назад
In this video i am showing how to replace the cover on the armrest or center console in a honda accord 2008 -2012 Merch backontheroaddiystore.company.site/products? www.paypal.me/Backontheroaddiy Buy Me a Coffee ☕️ www.buymeacoffee.com/backontherf #backontheroaddiy #centerconsoles #armrest Disclaimer: Welcome to my DIY channel! All the projects, tips, and techniques shared here are based on my ...
How to BLEED brakes for MOST CARS
Просмотров 831Месяц назад
In this video i am showing how to bleed your brakes Replacing rear rotors and brake pads? Not a problem in this video i show the way i do it step by step. How to REPLACE brake calipers yourself honda accord 2008 ruclips.net/video/TmTu6L1GWkY/видео.html Merch backontheroaddiystore.company.site/products? www.paypal.me/Backontheroaddiy Buy Me a Coffee ☕️ www.buymeacoffee.com/backontherf #backonthe...
How to REPLACE rear ROTORS and BRAKE PADS HONDA ACCORD 2008-2012
Просмотров 249Месяц назад
Replacing rear rotors and brake pads? Not a problem in this video i show the way i do it step by step. How to REPLACE brake calipers yourself honda accord 2008 ruclips.net/video/TmTu6L1GWkY/видео.html Merch backontheroaddiystore.company.site/products? www.paypal.me/Backontheroaddiy Buy Me a Coffee ☕️ www.buymeacoffee.com/backontherf #backontheroaddiy #brakeservice #changebrakes #brakesandrotors...
How to CHANGE BRAKE PADS & ROTORS on Honda accord 2008-2012
Просмотров 140Месяц назад
In this video i am showing how to change the front brakes and rotors on a honda accord 2008 Merch backontheroaddiystore.company.site/products? www.paypal.me/Backontheroaddiy Buy Me a Coffee ☕️ www.buymeacoffee.com/backontherf #backontheroaddiy #brakeservice #changebrakes #brakesandrotors Disclaimer: Welcome to my DIY channel! All the projects, tips, and techniques shared here are based on my pe...
DIY PAINT JOB at home no PAINT BOOTH easy STEP by STEP
Просмотров 1,7 тыс.Месяц назад
!!!Super important!!! The color of any car is in a sticker located on the driver side door jamb or door for this honda accord 2008 coupe the paint code is nh700m In this video i am showing you how i painted this honda accord at home with rattle cans or spray bottles using simple techniques without the need of a paint booth. This is a step by step video very easy for any DIYer or beginner to fol...
How to REPLACE laptop BROKE SCREEN
Просмотров 15Месяц назад
How to REPLACE laptop BROKE SCREEN
Best AFFORDABLE seat COVERS
Просмотров 168Месяц назад
Best AFFORDABLE seat COVERS
Alternator BROKEN BOLT honda accord 2008-2012
Просмотров 247Месяц назад
Alternator BROKEN BOLT honda accord 2008-2012
How to fix ABS and ABS light HONDA ACCORD 2008-2012
Просмотров 652 месяца назад
How to fix ABS and ABS light HONDA ACCORD 2008-2012
How to FIX broken CAR MIRROR DIY
Просмотров 1232 месяца назад
How to FIX broken CAR MIRROR DIY
How to PAINT CALIPERS at HOME DIY
Просмотров 1,2 тыс.2 месяца назад
How to PAINT CALIPERS at HOME DIY
How to PAINT WHEELS at HOME
Просмотров 1,4 тыс.2 месяца назад
How to PAINT WHEELS at HOME
Get RID of BAD SMELL in any car FAST
Просмотров 8452 месяца назад
Get RID of BAD SMELL in any car FAST
Honda Accord TRANSFORMATION (budget)
Просмотров 132 месяца назад
Honda Accord TRANSFORMATION (budget)
P0303 HOW to FIX
Просмотров 563 месяца назад
P0303 HOW to FIX
COOLANT FLUSH / ANTIFREEZE FLUSH ACURA MDX
Просмотров 1,6 тыс.3 месяца назад
COOLANT FLUSH / ANTIFREEZE FLUSH ACURA MDX
Check your BRAKES without removing WHEELS + BONUS tip at the END of the VIDEO
Просмотров 2,2 тыс.3 месяца назад
Check your BRAKES without removing WHEELS BONUS tip at the END of the VIDEO
HOW to CHECK CAR BRAKES WITHOUT removing the WHEEL
Просмотров 1,1 тыс.4 месяца назад
HOW to CHECK CAR BRAKES WITHOUT removing the WHEEL
FREIGHTLINER CASCADIA 2024 Window NOT going UP
Просмотров 2,5 тыс.5 месяцев назад
FREIGHTLINER CASCADIA 2024 Window NOT going UP
How to Reload / Refill FROG CHLORINE CARTRIDGES for your POOL
Просмотров 3065 месяцев назад
How to Reload / Refill FROG CHLORINE CARTRIDGES for your POOL
Gym ATTACHMENTS storage SOLUTION
Просмотров 365 месяцев назад
Gym ATTACHMENTS storage SOLUTION
Bench made out of PALLET restoration
Просмотров 1125 месяцев назад
Bench made out of PALLET restoration
How to INSTALL GLASS SLIDING DOORS on BATHTUB
Просмотров 455 месяцев назад
How to INSTALL GLASS SLIDING DOORS on BATHTUB
How to Get RID OF MOLD in WINDOWSILL
Просмотров 106 месяцев назад
How to Get RID OF MOLD in WINDOWSILL
How to WASH your car
Просмотров 466 месяцев назад
How to WASH your car
(NO VIDEO CUTS)Change Brake PADS & ROTORS HAND TOOLS ONLY
Просмотров 3146 месяцев назад
(NO VIDEO CUTS)Change Brake PADS & ROTORS HAND TOOLS ONLY
How to Change REAR BRAKE PADS & ROTORS(step by step)
Просмотров 1846 месяцев назад
How to Change REAR BRAKE PADS & ROTORS(step by step)
Touch UP kitchen CABINETS DIY
Просмотров 3656 месяцев назад
Touch UP kitchen CABINETS DIY

Комментарии

  • @Miguel-gw2th
    @Miguel-gw2th 2 дня назад

    Does yours have static on the speakers and it increases as you increase the volume? Any idea how to fix?

    • @backontheroaddiy
      @backontheroaddiy 2 дня назад

      Check the rca wires they should be all the way in. If they get a little loose when assembling everything back up static may happen.

    • @Miguel-gw2th
      @Miguel-gw2th День назад

      @@backontheroaddiy I checked and it’s all plugged in good i unplugged and replugged it and still getting the static noise

  • @S3RG1020
    @S3RG1020 5 дней назад

    Thinking to do the same on 2012 odyssey Top bolt broke

    • @backontheroaddiy
      @backontheroaddiy 5 дней назад

      Go for it. mine has been holding up well so far

  • @velelamja
    @velelamja 6 дней назад

    Thanks this solved my problem

  • @chambalJ
    @chambalJ 13 дней назад

    Thanks bro

  • @rdarden81
    @rdarden81 13 дней назад

    It looks like my volume is capped and it doesn't respond to turning it up even if it's max volume.

    • @backontheroaddiy
      @backontheroaddiy 13 дней назад

      Did you you put the max at the screen also (not the max from the radio) also check in the settings. There are some volume settings that may be low. meaning there is a setting where lets say someone wants half of the max volume to be the max. The could set it to be that way so the headunit would only produce half of its real capabilities. Go into the settings and max everything to see if that helps

  • @JeffRoberts-z4e
    @JeffRoberts-z4e 15 дней назад

    Most of the time when brake fluid gets low it's time to change the brake pads

  • @SakibAhsanTamim
    @SakibAhsanTamim 23 дня назад

    Hello, "backontheroaddiy" I was analyzing your channel and saw that in your channel have some problem, That's why your channel is not much growing and not getting much engagement, If you can solve these problems, Your channel will grow like a storm. If you tell I can tell these problems. Where can I tell? Here or email?

  • @Advincent
    @Advincent Месяц назад

    The time wasted was worth it

    • @backontheroaddiy
      @backontheroaddiy 29 дней назад

      It was worthy. my son worked hard all summer, helped him negotiate this car for a very low price, we both worked on the car so he learned a lot. Now he is taking his DL test this week. This is going to be his first car to finish high school so im very proud of him. This one looks definitely better than the junk yard hooptie i had as my first car lol which by the way it was ugly but unbreakable. it lasted for years lol

  • @mommae295
    @mommae295 Месяц назад

    Thank you for posting this . Where did you order the cover from ?

  • @peeperp4949
    @peeperp4949 Месяц назад

    👏🏼👏🏼 thank you ❣️

    • @backontheroaddiy
      @backontheroaddiy Месяц назад

      Glad to help, appreciate the support! 👍🏽

  • @nymedo
    @nymedo Месяц назад

    It didn't work on my 2016 Freightliner cascadia. Did you shut down the engine before you pulled out the speed sensor?

    • @backontheroaddiy
      @backontheroaddiy Месяц назад

      Yes engine off and pulled the sensor all the way out.

  • @Apulux
    @Apulux Месяц назад

    Welcome back bro keep going

    • @backontheroaddiy
      @backontheroaddiy Месяц назад

      Thanks brother, appreciate the support! 👍🏽

  • @jefferrrson1x
    @jefferrrson1x Месяц назад

    Man that’s a ton of work but great job!

  • @xTymezz
    @xTymezz Месяц назад

    Well done!

  • @MrCATIAEXPERT
    @MrCATIAEXPERT Месяц назад

    What?

    • @backontheroaddiy
      @backontheroaddiy Месяц назад

      A pressure switch in a furnace is a safety device that ensures the system is operating correctly, particularly with respect to airflow. It monitors the pressure inside the furnace’s venting system, making sure that there is proper air movement for combustion gases to be safely expelled. Here’s how it works: 1. Startup Phase: When the furnace turns on, the draft inducer fan activates to help exhaust gases out of the flue. The pressure switch monitors the pressure created by this fan. 2. Pressure Check: If the pressure is correct (indicating the draft inducer is working and air is flowing properly), the pressure switch closes, sending a signal to the control board to continue the ignition process. 3. Safety Feature: If the pressure is too low or too high (caused by blockages, leaks, or fan malfunctions), the switch will stay open, preventing the furnace from igniting. This protects against carbon monoxide buildup or other dangerous conditions. In short, the pressure switch ensures that the furnace only operates when it’s safe to do so, helping to prevent gas leaks and other hazards.

    • @backontheroaddiy
      @backontheroaddiy Месяц назад

      The pressure switch typically lists how much vacuum (in inches of water column, or “WC”) it needs to close. Once you confirm the inducer motor is generating the correct vacuum, you can be confident that the airflow system is working as intended. If you’ve confirmed that the inducer motor is working but the furnace is still not running, you may bypass the pressure switch temporarily to check if it’s the source of the problem. This allows the furnace to run and warm the house, but only as a short-term measure. This is considered safe to do briefly because you know the inducer motor is functioning correctly and the combustion gases are being vented properly. However, this bypass should only be used to verify that the switch is faulty. @MrCATIAEXPERT hope that helps 👍🏽

  • @tylerpayne5471
    @tylerpayne5471 Месяц назад

    You didn’t explain what worked….

    • @backontheroaddiy
      @backontheroaddiy Месяц назад

      On that video the pressure switch was stuck open but checked this video i show how diagnosed everything and how to fix it ruclips.net/video/tBBv9wmopas/видео.htmlsi=4_DSZQ1MQ596MhUo

  • @gurwindersingh-cx6el
    @gurwindersingh-cx6el Месяц назад

    thanks bud👍🏻

  • @mowtrucker3921
    @mowtrucker3921 2 месяца назад

    Thank you brother, you are a big saver brother 2024 this crazy technology very crazy because the door control got bad never stop honking beeping beeping if I don’t get it your Video I should stop period..thank you again brother.

    • @backontheroaddiy
      @backontheroaddiy 2 месяца назад

      Glad I could help brother 👍🏽🛠️💪🏽

  • @kennethvalentine8100
    @kennethvalentine8100 2 месяца назад

    Thank bro

  • @alexjesusguzman3538
    @alexjesusguzman3538 2 месяца назад

    🔥🔥

  • @goldenboy1060
    @goldenboy1060 2 месяца назад

    Thank you. This solved my problem.

  • @livitystudios
    @livitystudios 2 месяца назад

    These look dope man.

  • @chocolatewon
    @chocolatewon 2 месяца назад

    Yup!! This worked!!! I was trying to go through the inside of the trunk but it’s one big metal plate. Easier than I thought. Thanks!

  • @mtlicq
    @mtlicq 2 месяца назад

    Great Idea with the sodium-bicarbonate ! and air-filter too ! What is in the scent-bomb though??? Air-freshener chemicals just ADD extra chemicals, and often they are full of unhealthy stuff that messes with endocrine glands, hormone-disruptors, lymph glands, bronchii & lungs, not good for asthma and alergies... phthalates inside? paradichlorobenzene ? poisons! Better to get a small tub of warm water with hand-wash dish detergent in it, or pine-sol or armourall, and wipe down all the solid items to remove the oils and dirt from the odiferous chemicals that settled there.

    • @backontheroaddiy
      @backontheroaddiy 2 месяца назад

      You gave me a good idea. Warm water with orange peels and lime peels and do the same cycle 🔄 of recirculating the air for 5 minutes. Thank you

  • @jaysam7758
    @jaysam7758 2 месяца назад

    how do i reprogram the steering controls. its not letting me do it i think i need the can-bus code

  • @Shahramkardan
    @Shahramkardan 2 месяца назад

    I had this same problem with the old engine and after I swapped the engine I’m still hand the same problem the lights turn on after driving for while then they go out after I turn of the engine it’s very weird but I’m going to check the brake fluid level and the lid just to make sure if problem won’t go away I ll have to go back to my mechanic and let them check it cause I changed the engine and I changed the ABS sensor and the wheel bearings too but the lights won’t go away they turn on after driving for while thanks for the video i will do what was mentioned I the video just to make sure it’s not he brake fluid thank you sir

  • @petebeat1510
    @petebeat1510 2 месяца назад

    Hey mate, my volume turns to full volume by itself randomly, it happens all the time so it will go from quiet to max volume out of nowhere, doesnt matter if im in park or driving

    • @backontheroaddiy
      @backontheroaddiy 2 месяца назад

      Remove the steering wheel fuse. A lot of time the steering controls don't work well with the headunits. If it doesn't stop the problem it is most likely cause by a short or a bad soldering of the components, and you would be better off sending that one back and getting a replacement. Hope that helps 👍🏽

  • @EngelbertGuevara
    @EngelbertGuevara 2 месяца назад

    Thanks man. It worked for my 10' Honda Pilot

  • @ZakkOsborne
    @ZakkOsborne 2 месяца назад

    So the speed sensor is connected by the universal joint toward the front of the truck, under the rear of the cab. Waiting on a call from the shop, but I suspect they might have me do this. Thanks for the info. 2hrs from home, engine went into derate and regens arent working. We'll see.

    • @backontheroaddiy
      @backontheroaddiy 2 месяца назад

      Some shops share this with you, some don’t trying to get a road service or a tow or by policy to avoid legal issues. Hope you make it home safe. Don’t forget to have the gps showing your speed 👍🏽

    • @ZakkOsborne
      @ZakkOsborne 2 месяца назад

      @@backontheroaddiy Didn't work anyway. Still sitting here waiting on a wrecker from the company, and questioning my life choices.

    • @backontheroaddiy
      @backontheroaddiy 2 месяца назад

      Try removing the sensor all the way

    • @ZakkOsborne
      @ZakkOsborne 2 месяца назад

      @@backontheroaddiy Had it all the way out. Didn't work. Ended up 9 hours on the side of the road waiting on the shop to send a guy with a loaner and a wrecker to tow it back. 2 hours away and it took them 5 or more. 😮‍💨

    • @backontheroaddiy
      @backontheroaddiy 2 месяца назад

      It be like that i know the feeling. But just gotta roll with the punches sometimes, tomorrow its another day. Hope everything works out well for you.

  • @myown3477
    @myown3477 2 месяца назад

    User manual says: Don't wash in washing machine! 😂 But truly, it's impossible to wash them manually. Maybe it depends on water in the region and chemicals used in the pool. Also it's recommended to check and manually wash them every 4 weeks 😅 oooops. Ok. I have only backwashed them twice per season, so put them into the washing machine together with a bit of washing gel. Ready to throw them 😂

    • @backontheroaddiy
      @backontheroaddiy 2 месяца назад

      Yes they want us to buy new more often and not deal with the hand washing lol. Just make sure you use cold water, and a little bit of vinegar if you want 👍🏽

    • @myown3477
      @myown3477 2 месяца назад

      So I washed them in a gentle mode of washing machine and left them to dry. It seems they are become not so fluffy thus they will not filter small dust as good as the new one. However, it is worth testing.

  • @thevirus6101
    @thevirus6101 3 месяца назад

    If you are hoping to attract views…. Change the background music. Very off putting. Just my two cents. 😉

  • @bigham_25
    @bigham_25 3 месяца назад

    my max volume is 30 and i want it louder is there anyway i can make it louder?

    • @backontheroaddiy
      @backontheroaddiy 3 месяца назад

      I would upgrade the speakers and add an amplifier that could get the full potential of those speakers.

  • @uttasyda9746
    @uttasyda9746 3 месяца назад

    Did this to mine 2 years ago whatta fuckin pain in the ass no one cant/won't do this in under an hour and best of luck putting bottom bolt back in!!!17mm if im not mistaken a lotta people give up and just put top bolt 14mm back in you can honestly get away with it but I just basically caught a few threads on bottom 🔩 bolt,marked where it began slipping and used a bunch of washers then tightened it with a crushwasher hasn't failed,best of luck my peeps!!!💯😁👍

  • @backontheroaddiy
    @backontheroaddiy 3 месяца назад

    Buy Me a Coffee ☕️ www.buymeacoffee.com/backontherf

  • @LennyR416
    @LennyR416 3 месяца назад

    Thank you 🙏

  • @billyarnold1578
    @billyarnold1578 3 месяца назад

    Wher can you buy this gadget and name of it plus price

  • @gkonsciousness1196
    @gkonsciousness1196 3 месяца назад

    Is this an automatic transmission?

    • @backontheroaddiy
      @backontheroaddiy 3 месяца назад

      Yes

    • @gkonsciousness1196
      @gkonsciousness1196 3 месяца назад

      @@backontheroaddiy yeah mines didn't work on a 2016 freightliner cascadia automatic dt12 transmission. Thanks for the info though

  • @zdeenrdeen3278
    @zdeenrdeen3278 3 месяца назад

    what is the tool call and where can i buy

  • @donpodejko8002
    @donpodejko8002 4 месяца назад

    Nice job

  • @jdwilliam9428
    @jdwilliam9428 4 месяца назад

    Thanks for the Video, It worked like a charm. In case somebody wants to know the size they are generic for T 10. The LED works the best, very bright.

  • @hashimsalim2665
    @hashimsalim2665 4 месяца назад

    ok

  • @baitss3281
    @baitss3281 4 месяца назад

    my max volume is only 30 which isnt loud enough. how do i make this play audio louder

  • @marksoprano007
    @marksoprano007 4 месяца назад

    My man is super thorough with the attention of detail. 👍🏻

  • @donpodejko8002
    @donpodejko8002 4 месяца назад

    The pads never wear evenly I'd like to see a shot of you checking the inside pad

    • @backontheroaddiy
      @backontheroaddiy 4 месяца назад

      I will be changing the oil this week so i will do a video checking both sides 👍🏽 @donpodejko8002

    • @backontheroaddiy
      @backontheroaddiy 4 месяца назад

      I uploaded the video check it out Check your BRAKES without removing WHEELS + BONUS tip at the END of the VIDEO ruclips.net/video/_ww_I9xs4JA/видео.html

    • @backontheroaddiy
      @backontheroaddiy 4 месяца назад

      @donpodejko8002

  • @Apulux
    @Apulux 4 месяца назад

    good stuff brother

  • @kethenbt4215
    @kethenbt4215 4 месяца назад

    How would you do it if you have the larger navigation screen instead of that small one?

  • @vovviel3049
    @vovviel3049 4 месяца назад

    Thank you!! Easy to understand and straight to the point!!!

  • @totallynotthebillcollector
    @totallynotthebillcollector 4 месяца назад

    Works for 2017 accord coupe although I found it easier to use a flathead screwdriver wedged between the light cover and the back of the bumper. Should be able to pry the clear plastic cover off pretty easy. Pretty much the same idea. Helpful video thanks

  • @cesiumion
    @cesiumion 4 месяца назад

    AC stopped working in my 2009 Honda Accord after installing an aftermarket android radio. Any idea why that may be?? BTW, if I remove the head unit, and install back everything factory, AC starts working. Any help be great...

  • @caseythomasr.8973
    @caseythomasr.8973 4 месяца назад

    This doesn’t always work

    • @Psyroads
      @Psyroads 2 месяца назад

      Another one showing the obvious.