Видео

Thank you! I started with the default preset from iFlight and had some issues diving down the mountains, because the drone didn't sink properly. I set the Damping down to 1.15 and the Dynamic Damping up to 0.25 - this works good for me with the 3300mAh battery and even better with a smaller 2200mAh battery.

@flipsfpv interesting I'm currently dealing with jello using action 5 pro on bob57 changed props gone back to stock preset from van elis one , so looking at others etc and Im on exact same battery too interesting about damping though

@mcmediaandfilm very interesting! Do you have the jello only in the footage or also in the O3 live feed? With my BOB57 the footage from the O3 cam or a GoPro 12 is not usable because of the jello. Gyroflow is not able to correct this. I have no problems with footage from GoPro 10, 11 or the GoPro Bones... My damping adjustments improved the flight behavior for me, but had no effect on the footage.

@flipsfpv hi mate, no jello n 03 footage only from action 5 pro I do have a tpu mount coming from china to remove the magnet mount as there is a slight play in that mount but wonder if the turn and adjustments would help that you have done .

@flipsfpv okay let me know, if the adjustments fix the jello. Just watched some of your videos about the BOB footage and read the comments. I think I will try other props and a lower motor frequency, too.

Zum Glück ohne Upsi 😏

@imdiegomoreno1584 it is hard to tell, why it is not working on your side... The Nazgul Eco should come configured correctly. In betaflight under the receiver tab: which receiver mode is selected? In the Ports tab: is GPS selected as Sensor Input for one UART?

@@flipsfpv Receiver mode says Serial (via UART) then in Serial Receiver provider it says CRSF

Thank you! Cheers!

Hmm I don’t know… I have no experience with ELRS…

TMac has some tutorials about telemetry data with ELRS here on RUclips 😉

@@flipsfpv thanks so much I’ll look now !

It should. I don't have a GPS but I can receive e.g. the battery voltage. I think you can even send / receive MavLink data via elrs telemetry to iNav or Arudpilot to execute flight plans etc.

It works, just did it and displays the correct coordinates😀

I agree. I have been gearing up little by little to attempt long range so all the extra confidence helps a bit. That is unless i lose my quad on a montain top😮

Thank you 🙌🏼

April 2023 - are there any known issues with the first Integras?

Thank you so much 🙏🏼✌🏼

Thank you! Totally agree with you! Confidence of the V2 is unbeatable 💪🏼

Yes, I have heard about the problems with the Goggles 3. In my case it was a hardware failure. I never had a problem with my Goggles V2 for years...

@@flipsfpv I just sold my v2 and I'm looking for goggles for myself, I'll probably buy dji integra goggles. I think V2 are the best goggles I ever had.

Hi, yes you can power up the GPS module by an external power supply with 5V. Be careful with the polarity! Why do you want to power up the GPS module by powerbank or phone? For testing?

@@flipsfpvmy o3 air unit is always get very hot before the GPS locks to enought sats , most of the times it locks zero , some times it works but most of the times it does not , i tried to move it on all ports ( on betaflight )but it seems like gps only works when i plug in the battery , but then all the electric noise makes GPS ‘s work very hard to lock sats .. so thats it :/:(

It is a nazgul ECO HD with a m10 GPS and a blitz atf435 fc ( bnf quad)

Okay, I understand... that is annoying, if the GPS lock takes so much time or doesn't work... Which gps module do you use? Some people have had good experiences with shielding the cables from the GPS module to reduce the electric noise.

@@flipsfpvits a iflight m10

Thank you! For this flight I used the FullSend 6S 3300mAh battery from iFlight. The Bob is quiet heavy with the GoPro and this battery, but okay. I also use a Tattu R-Line 6S 2200mAh battery for my flights with the Bob. Less flight time, but more agile...

@@flipsfpv Got it. In your opinion how does the 3300mAh and 2200mAh feel to fly. Sorry for asking too many questions. I basically have the same quad and have been using it for some time. I have been flying 1850mAh GNB batteries, which are fun to fly without GoPro, but gives only 3-4 mins with GoPro. So was thinking whether to buy a 2200mAh or 3500mAh DOGCOM (those are the only 2 options I have). Also I don't have a lot of mountains where I live, but I would like to surf and dive my quads on mountains whenever I get a chance. So which one of these batteries would you suggest I buy?

No problem! I was facing the same decision. If I have to choose, I will recommend the 2200mAh battery. You can get 7-8minutes flight time with some climbing. If you want to go higher and longer, go for a bigger battery like the 3300mAh.

Your comment makes no sense, bro 🙃 The gyro data is manipulated by vibration, so the gyroflow output is shaking. There are several videos and reports about this problem with the O3 AirUnit out here on RUclips and i.e. reddit. Just search for "O3 shaking video" or similar... I'm glad you haven't had any problems with gyroflow so far!

Oh! Vertauscht angelötet? Normal sollte das GPS davon keinen Schaden nehmen, sondern einfach nur nicht funktionieren 👍🏻

@@flipsfpv alles top 👍

With Crossfire 😉

@@flipsfpv perfection

Hi, I have frame version 1.2 - I think the frame version 1.4 is already prepared for the O3 cam and Air-Unit according to the iflight website. So you can follow this guide, but don't have to print the custom mount 👍

Thank you! Yes, according to the data you should go with 4S for long range. However, I prefer 6S because I don't like the flight behavior with 4S 🙃

Thank you! Yes it's the video feed from the Vista recorded by the Goggles V2 :)

Thanks 👍

@pottyputter05 I fly with betaflight

Hey @SalmaDrone, for this flight I used my GoPro12 without HyperSmooth. I stabilize the footage with Gyroflow. With the GoPro12 I have problems with the footage taken on the BOB57. With other GoPros I don't have the problem. Also I don't have problems with the GoPro12 on other drones... I think it is a bad combination of the GoPro, the mounting and the motor frequency.

@@flipsfpv wow. Interesting. Earing that now I really have a problem to decide between bob57 and chimera 7. Thank you my friend

Hi @MaxLoew-ds5ez, die BOB57 ist auf jeden Fall eine gute Drohne für LongRange und cinematische Aufnahmen. Das Versprechen von iFlight ein Mix aus LongRange und Freestlye zu sein, kann ich nicht bestätigen. Die BOB57 ist im Vergleich zur Nazgul viel weniger agil. Ich fliege beide Drohnen (Nazgul & BOB) seit ca. 2 Jahren und fliege viel lieber die Nazgul, da sie sich präziser und berechenbarer steuern lässt. Hoffe das hilft dir weiter.

@@flipsfpv ohh ok verstehe. Die Nazgul dann auch besser geeignet für Videos oder kriegt das die BOB auch hin - wenn es mal kein log Range video sein sollte. Krassen Freestyle werde ich wohl eh nie machen oder wenn, dann mir dazu eine eigene drohne bauen. Vielen Dank für die Antwort :)

Welche für Videos besser ist kommt auf den Anwendungsfall drauf an. Für langsame, cinematische Aufnahmen (Landschaft, Berge, ...) würde ich die BOB57 nehmen, für schnelle Aufnahmen durch Hindernisse hindurch eher die Nazgul :)