Видео

I have this same exact issue and got a code for the N216 solenoid. I replaced the solenoid, but had the same issue but the code disappeared. I got a new mech unit and it still persists... This is why I never buy automatics...the one time I do, I have this issue within 4 months of ownership.

Hello Reviews,Fixes,Hacks Munsur,,,can I use this clip in my compilation? Any comment what happened? Thanks

The Diverter valve needs to be coated in high-quality silicon grease so the O rings slide easily on the 6mm rod

I did this to my boiler a decade ago - when the wind outside caused blowback it would splash on the boiler trap sensor and trip the shut-off - I think the sensor is there in case the condensate outlet is blocked or frozen

Hi for every fill up is it 1ml to 1 litre or 1ml to 1.5 litres thanks

I will try this as my betacom boiler is doing this

Thank you so much. Just like many of his cousins, our Henry was a little bit ill. With your help, I was able to perform the magic surgery. Henry lost a bit of his brain but now goes full power all of the time. Just what we need. Very helpful video.

I love the bit where you show removing the sensor.

That music ugh!!! You might want to ditch that for future videos mate! Really!

good video...thanks

All these years that Henry has been in business, they can't fix the PCB or high-low switch. I have had 3 Henrys that have all packed up because of the switch, it's ridiculous. Going to stay well clear of them in the future and I wouldn't advise anyone to get one till these faults have been fixed. My Mother-in-law had a Henry many years ago in the early 1980s and it is still going strong with not one fault in all the years, but these newer Henrys are just plastic rubbish and a waste of money.

I`m a bit thick when it comes to electrics but that was so well explained the old Henry is back in action. cheers.

I have the exact same issue! Did you also change Flywheel or Transmission oil pump?.. would very much appreciate your help!

Hi,thank you for video,was thinking maybe you can help me as well :) I have zafira 1.7 cdti engine is a17dtj when driving on first gear is jerking,before turbo kiks in feals low power,consumption is about 12liters to 100miles about,sometimes is comming black smoke on high rpm after no black smoke,maf sencor is showing from 2-8g/s up and down if I connect to read live data,yastarday I bought new denso DTRS301110 fuel pressure valve but it wount start,I will send back ,maybe foulty part,my old one cleaned and polished it is working... if you need any live data I can drop to you,what do you think is it possible it is MAF sensor foulty? by the way I bought used maf sensor from ebay and it is similar,numbers 2-8g/s and one more think,when accelerating before turbo is loud sound like injector sound and in that time feals low power and sometimes is working better,feals like ecu trying to learn,not sure.but it is no any foults.Thank you for any help

I’ve checked - but my machine doesn’t appear to have a dwum… 🤔

What would happen If this was put a full bottle in a near empty tank. Would it clear the injectors more ?

You’ll notice that the Vauxhall vehicles do a regeneration quite often due to having a smaller DPF filter. Ensure you allow it to complete.

My Astra did it today,alarm sounded,then a warning onscreen saying DPF Full,continue driving,so I went for a blast on the motorway and after 20 minutes or so,it cleared

Awesome, worked a treat and saved me buying a new machine. Many thanks.

Hey Munsur, did you fix the problems after egr, maf and map sensor cleaning? Cheers! :)

Is mashin ko clean kaise kre

ruclips.net/video/kDZZqOIs2OE/видео.htmlfeature=shared

Just repaired my one, Thank You for the instructions, that save me a few quid, couldn't of dun it without your help,

Turn that crap music down!!!😮

Awesome, just what I needed, so well explained. Now I could really do with a video that shows how to remove the plate heat exchanger for cleaning, many thanks.

thank you for your video it work for me too you just save me 4000 pounds for not changing the boiler you are genius

My Hi Lo switch wasn't working and this fix has sorted it out. Cheers lad🫡

why would anyone fit one of these piles of absolute shite is beond me LOL i would refuses to install it utter shite

Jim, I agree. I didn’t fit the boiler, had a gas engineer out to do it. But as you’ve stated opentherm is great. I had to show the engineer how to wire for opentherm, he was going to install without as he didn’t know how. Shame really, as I’m guessing he has probably been installing it other properties without opentherm when they’re boiler supports it.

Nice boiler, poor pipework, great RF controller, opentherm is excellent!

I have the same problem whit my car! What was its,and how to make it

❤.

Very helpful so far, though it feels like there is a section missing during disassembly. You take the back motor off and then just lift the drum out, but didn't see you remove weights, or some pipe connection from bottom of drum, and only heard mention of removing one damper arm.

Waste of time

Worked like a charm. Saved me buying the pcb for £18.99 and the misses can get back to cleaning lol

In instructions it says "allows for disassemble" but it doesn't say how. I believe heat will soften it for disassemble. Interesting that you say the bottle needs oxygen to stop it hardening so only loosely tighten cap, but then how does it harden on the thread?

What happened to the broken off part ?

almost same model, same fault here. just wondering why the rattling noise while its just a faulty sensor which has no mechanics

Henry is now back in action! Thank you so much.

Thanks Dude , fixed mine that was in the cover for months.

Great tutorial! One I was serving for someone working perfectly fine!!!

Thanks for posting this. Seems I have issues similar but luckily less severe, and have been suspecting the mechatronic unit.

Some stuff is sourced randomly, something like Shobby Holla or a similar make.

Hi is this better then the millers

U but it in twice how much fuel u put it

Yes bro found ur channel, it’s me Abu. Sold my corsa got a diesel now, does this work?

just got the DBP-100 a couple weeks ago. it says to use 1ml of additive for every 1L of diesel on the 1st use (full tank for me is 50L so I used 50ml of additive), and then 1ml of additive for every 1.5L of diesel after that... I'm still running that 1st tank so I can't really comment on any improvements yet, but considering we only have regular fuels over here (no fancy neotech diesel from repsol for example, or others) I guess anything helps in the long run... I wasn't having any issues with it, just felt like trying to treat my cars internals a bit better... their thing is "turning regular fuel into premium fuel" so, yeah...

Hey , I have a 9 year old bosch serie 4 wshing machine and it squeaks really bad when I turn the drum clock wise or anti clockwise . Is this a sign of a bad drum bearing ?

Obviously, it's going to move otherwise it won't turn 😂

Hi mate. Great video, but what happened with the follow up and results? Cheers.