- Видео 2
- Просмотров 6 472
IMadeThing! IMadeWonderfulThing
Добавлен 11 дек 2017
Front Brake Pads 1994 Honda CBR 600 F2
Change your own Brake Pads! Video has no commentary, just me wrenching on me bike. (turn on CC for annotations)
This should cover all versions of the CBR600 F2 series (91-94).
Pads are cheap, get them on Amazon.
Tools:
Rachet, 12mm socket, flathead, 5mm allen, Channel Locks Hammer, Patience.
In order of appearance:
Remove covers to Pad Retainers (Flathead, lots of patience, Hammer, maybe even a helper).
Break Pad Retainers loose. (Rachet, 5mm allen head socket).
Remove caliper bracket bolts. (Rachet, 12mm socket, Breaker Bar??)
Back out brake cylinder. (Channel locks/Brake Cylinder tool?)
Remove Brake Pad Retainers.(5mm Allen Head)
Remove Brake Pads.
Install new Brake Pads.
Install Brake Pad Retainers...
This should cover all versions of the CBR600 F2 series (91-94).
Pads are cheap, get them on Amazon.
Tools:
Rachet, 12mm socket, flathead, 5mm allen, Channel Locks Hammer, Patience.
In order of appearance:
Remove covers to Pad Retainers (Flathead, lots of patience, Hammer, maybe even a helper).
Break Pad Retainers loose. (Rachet, 5mm allen head socket).
Remove caliper bracket bolts. (Rachet, 12mm socket, Breaker Bar??)
Back out brake cylinder. (Channel locks/Brake Cylinder tool?)
Remove Brake Pad Retainers.(5mm Allen Head)
Remove Brake Pads.
Install new Brake Pads.
Install Brake Pad Retainers...
Просмотров: 4 445
Видео
Minn Kota PowerDrive, 50lb thrust, electric 12 volt outboard trolling motor overview
Просмотров 2 тыс.6 лет назад
Minn Kota PowerDrive, 50lb thrust, electric 12 volt outboard trolling motor function overview. Shows: stowed, deployed, battery charge indicator, function of foot pedal: motor on, speed control, motor off, 360 degree shaft rotation in both directions. Everything runs much faster with a proper deep-cycle marine battery, I don't have one, used an older SLA from a defunct UPS
Cleaning the brakes & wheel before would prove helpful...
Witam a mi po postoju zimowym klocki trzymają. Tak że ciężko pchnąć motor. Zauważyłem już pod koniec sezonu że hamulce się zrobiły dziwne. Podpowiedź trzeba ruszyć prowadnice. Pozdrawiam Tomasz
Couldn’t tell
2 each side
Question did you put 4 pads in there or 2 I have double calipers
Those nuts...bolts...were bloody tight....
Yup, just gotta be steady about it, one of those hammer screwdrivers is useful for removing the caps, they anodize ‘stuck’ because: aluminum and steel do that to one another.