Видео

@@goindh not sure if LDO is making a kit, but fabreeko definitely is. I also sell the printed parts on my site.

@@NanashiRyuu should be a lot of fun!

@chewy2420 yea it's an amazing product! I'm super happy to work with them on this

yea the E3NG is a great project. im editing the video currently im hoping to have it out soon!

It's the voron z endstop, aka sexbolt.

@@Armor3dprinting I know what it is. What did you use to mount it to the E3NG

@@jpmpro2000 ah ok lol. The version 1.2 rear arm has mounts for it. All of the files are obtainable from either the printables page or from www.rh3d.xyz

@Armor3dprinting ill have to modify my existing mounts I have a beta E3NG that I built awhile back

@@Armor3dprinting Was this a kit or did you self source? Nice build by the way!!

Not entirely sure, i would check the discord for that answer.

@treyduval5399 no you can still set it manually. Find me on discord @davidp for questions

@bordesigns1429 so ypu need to make sure everything is symmetrical and the y rod holders aren't bolted too tight. Make sure everything was installed correctly i would use the manual for a reference. While building this i was using CAD. Since this video was made the build manual was released. You can check it out at www.rh3d.xyz

@creativecityis lol I was feeling cheap and needed to print abs quickly for a project. I went to my local Home Depot and got some insulation boar for about $15 and some aluminum tape. It works great, chamber Temps get to about 50-60°c

@TwoBee3D its a great addition. I've been printing non stop with it since the install and haven't had a single issue and the prints have been beautiful

its the bd sensor from www.pandapi3d.com/

@xisunleashed4058 absolutely. Anything in particular you'd like to see?

@Armor3dprinting frame alignment maybe.

@@xisunleashed4058 i can do that. I should have another NG build coming in the coming months. Have you sifted through the live streams i did?

@@jljr99 glad you liked the video! I'm working hard to make them better each time!

@@Armor3dprinting What SV08 groups are you in? Are you getting you macro information from groups. I'm sort of new and really need these resources. Thank you for your help.

@@jljr99 i am in the SV08 Facebook group. That is where I found the Demon Macros.

@@eovnu87435ds thanks for watching! I've always been a fan of microswiss products

@Beskar181 understandable. They are readily available and I'm sure clones will be available soon. $12 isn't super bad for a nozzle though. Still less than a Bambu replacement nozzle. And with the bambu you need to take the whole hotend apart to do it. With this one its as easy as unscrewing the old and screwing in the new.

@Armor3dprinting well the bambu clone hotends are much easier and cheaper. The nozzles unscrew without having to change the whole hotend, and you can get a pack of nozzles for a few bucks (roughly $4-$10 or so depending on what you want).

microswiss offers a cht version of this one, along with a hardened version and even a diamondback version. store.micro-swiss.com/collections/flowtech-nozzles

Can you tell me more about this solution? Where to get this MK8 adapter?

​@@reinerrosinFrom what I understand he made his own adapter

lol, i honestly never worried about my stock nozzle. i've printed a ton of PLA, ABS and ASA with this printer and 0 issues. i dont print with PETG though so maybe that was my saving grace.

The nozzles are not proprietary for the microswiss, and the stock hot end has been dropping out from backflow pressure printing petg.

the stock hotend requires you to swap the entire hotend, this one allows for just a nozzle change. and as far as i know there are different nozzles to choose from. from the standard nozzle that comes with it all the way up to a diamondback version. its really no different than throwing a revo hotend on your printer.

I'd trust Micro-Swiss to keep it in production long-term.

@@DrFate09 oh for sure. I may give it a shot later!

@vignesh_tech_unity7798 the build manual isn't made yet. I build this by using the CAD you can get the CAD files by donating to RHs Kofi page. He should be tagged in the description

@@vignesh_tech_unity7798 I have been using the CAD to assemble the NG

@vignesh_tech_unity7798 just wanted to let you know the manual has been released. Check out www.rh3d.xyz

@nexonnuke707 they are haha. Very fun build. I have 3 of them :)

Thanks for watching! after using this for a couple days now i will say that it is noticeably better than the prior model. i have 2 spools of abs that are in it now and the humidity level has gone down, and you can see the condensation accumulate on the sides then go away after time. to me that shows that the moisture is being pulled from the filament.

idk about multiple toolheads, but my green one is now running the new Box Turtle MMU. and in the near future i will be doing a multi extruder set up on the pink one!

@zk_6312 this one has a e3d v6 hotend with a slice copperhead heat break. And is using klicky probe. I have another one (the green one in my videos) that was using a dragonfly hotend but us now using a dropeffect neXTg fiber

Yea, absolutely. Im planning on making a build series on it. I'm just waiting on a couple items and I'll get that under way

@@Armor3dprinting awesome can’t wait!

@@YouBetterCallSaul your comment gives me motivation to get it goin. Maybe what I'll do is I'll make a video on the blue one (the green one is apart at the moment) with pain points and over all tips.

@@Armor3dprinting there’s barely any videos of people building the NG’s on RUclips…even the creator just has short clips and videos of printers printing quickly…I think you definitely should do it!

@@YouBetterCallSaul ill see what I can put together. Keep an eye out over the next couple of days.

Have fun with it! You can reach me on IG with questions @armor3dprinting there's also an NG discord make sure to check that out!

It's Atomic Filaments UV reactive green abs

Thanks man!

Thank you!