- Видео 4
- Просмотров 49 578
Mike Martin
Добавлен 4 июл 2007
The best way to get rid of black algae?!
If you’re having issues with black algae in your pool, this is really easy method for taking care of it.
Просмотров: 237
Видео
Repairing the Aqua Rite PCB
Просмотров 30 тыс.7 лет назад
Soldering the current limiter on the Aqua Rite PCB
Wow! Just happened to me.. I have a 2020 Chevy Silverado
It’s an easy fix. Part is like $28 and it takes 10 min to do at home
How do you fix it
@@loganford3971 there’s a bunch of videos. The part is like 28-40 bucks Just need a screw driver to push in the clips and pop the assembly out. Slide the door cover off and slide onto new assembly
The dealer sells those for $30. Takes all of 10 min to install.
Just happened to me today. 2021 Custom trail boss with almost 3 years old & 80k miles, but gas door - WHAT . A GAS DOOR COVER... 😂 And new ones are 80,90, 100k + No Thanks
It's amazing that problems like these are ignored and sold to the public. There is no way they didn't know of it considering how many people are having the same issue. It had to have been noticed before the 1st truck was sold and yet something so simple was never modified and fixed.
Same problem here (2020 Chev Silverado 1500 (L82) WT). I found the entire fuel tank lid housing assembly on the actual Chev website for slightly over $10 and like a dumbazz I didn't buy it at the time and now I don't see it on there anymore. Was yours just the spring or had something else rusted/broken on the housing assembly that was keeping it from staying shut? Mine has no spring action pulling the door closed so very likely spring but not necessarily. Were you able to find OEM part or is 3rd party part fine?
ruclips.net/video/Kj1sesL9qeA/видео.html
25 bucks Amazon someone is making a killing this is a well known problem
I like to leave the legs long to help dissipate heat. The wire is stiff so no danger of bending or touching. I even saw one post where they had the stiff wire longer legs left in after the dead thermistor had been snipped and they installed screw junctions on each leg. All they then had to do was unscrew the dead one and secure a new one in the joiners. No need to even remove the board. I might try it. The screw joiner blocks also provide more heat dissipation area.
The dealer will charge you a minimum of $250 to fix it and the part is $41
Where to get or purchase part ? Much help..
I've been a loyal chevy guy for ever. Have a 2020 silverado 2500hd fully loaded and the same thing happened to mine and they wanted 500 dollars to fix it because I have 38,000 mile on it. Even after all the BS I've been putting up with on the squeaking brakes on this truck. About to be a Ford owner.
$20 part dude
I'm a Ford Parts manager...hope you didn't do that to yourself lol
Ford sucks too. Mexican labor is terrible. You can but the housing and fix it yourself in 20 minutes for like $50. It’s very simple I just had to do it too
Just fixed mine today, had to order a new replacement housing. Chevy know better … they use a plastic henge with a heavy metal spring , why not use all metal?? Only had my truck for 3 months. Already regretting buying a Chevy
Did you find yours on Chevrolet or GMC website or did you find it from a 3rd party seller? I saw one on the Chevy website about a year ago for literally like $15 (the entire fuel tank assembly housing) but I didnt buy it right then b/c I assumed it would be easy to find but I havent seen that part on their since and can't locate it through other places either.
Ford has the same plastic hinge. My broke at 40k miles purchased new 3.5 years ago. Gonna have to upgrade the hinge myself.
How remplacement this pice
Mine just broke yesterday same problem it’s a 2020 Chevy Silverado poor design I guess
Just happened to me today 😞
2019 trailboss, same problem. Did you fix or take to dealer? Thanks
Took it to the dealer and had it repaired under warranty, I literally had it less than a month when I made that video.
My 2021 1500 door broke . The plastic in the hinge snapped
How did you fix this?
will this solve my issue of not displaying the correct salt level even after calibration?
What was the fix/ how much does it cost? My 2019 1500 gas has this problem with 60k miles
What was fix? Spring
Did you fix just happen to mine 50k mile
How did you fix it have the same problem on my 2019???
What was fix?
I have a 2019 and it’s not covered by warranty. Mine has done the same thing and they want $179 plus tax to fix it.
@@x_ItzD_x I'm am not very mechanically inclined, but I fixed mine. It took maybe 10 minutes. It's an 18 dollar part, but shipping rips you off for 30 bucks.
Whats the link for the part
@Marco perez I don't know how to post links, but just type in gm parts online into Google, and it will take you to it.
Did the trick. Only difference my Aquarite 20 years old and contacts were on top of board. I have never soldered. Had a 30w old iron and solder from sons hobby days and it workedl Not as neat as yours but helped seeing your video. Cost. 5.99. Thanks
Chevy definitely cheaped out using plastic with everything. My fuel door broke as well in -40 Celsius
Same problem With my 2019 Silverado 1500
Aggravating no doubt
Have a 2020 gas Chevy 2500 WT as well. Never had any problems with the fuel door or anything else for that matter. I have about 13800 miles on mine. Most likely just a defective part.
Great video and I have followed your instructions to fix my board. But my display button is not responding. Its stuck on salt reading. Any suggestions?
I did this and it worked!!!!! Thank you for posting this video
Great video and the ground planes are a bitch to solder to so you certainly need the high wattage iron.
MINE IT TOTAL BAD NO LIGHTS COMES ON CHECK POWER COMING IN AND OUT THE BOARD IT SEEMS TO BE FINE BUT NOTHING WORKS. WOULD THIS BE THE PROBLEM?
Great job. I am electronic engineer very good teaching. probably should invest into a Weller solder station...
Is it a good idea to put a paper towel sheet over the rest of the board except for the square area you're soldering in case solder drips & hardens on another part of the board? Thanks for the video, I'm about to repair my PCB board.
Whatever works Scott
Mike, I wish that I would've scrolled down and viewed the comments. I spent a long time searching for this product online before learning that I could buy it from Amazon. Order placed after pausing your video to learn exact replacement part, for mine crumbled in my hand when examining the circuit boar. I was troubleshooting why the 'power' light did not glow, nor did the 'generating chlorine' or 'superchlorinate' lights glow. I had digital numbers display, and the 'no flow' light flash when I turned the unit on. There was no detectable chlorine in the pool. The panel was 'going' for a couple of months for the pieces were crumbling without my knowledge until watching your video. I hope my soldering project works in 2 days...for I am a novice at this project. Thank you for the video. Di
It will be a piece a cake, you will see. Make sure you have a decent solder iron/gun. 25 watt won't work well in this application (blue motherboard). Yes, it technically can, but you will be there forever trying to heat up the solder from the board. Get a higher wattage iron and you should be done in minutes.
@@Zeppelinlv2007 the motherboard is green what is the purpose of soldering the piece in place? The copper wire beads up falls off.....
Whoa, got one to stick in place....one to go...
@@diane-k3n You can do it! The purpose is so the solder can make the legs conductive and strong for the circuit board. Inside the board, there are traces. These traces (looks like lines) are responsible for carrying electricity. This is why when this part broke, no electricity can flow through. No flow, no juice.
@@Zeppelinlv2007 I figured out that my solder pads are on the front of the unit, not the back. So I was able to complete the project. I replaced the unit back into the box, connected all the wiring, and lo and behold!!! 'Power', 'Generate', and 'Superchlorinate' lights appear, along with chlorine in the pool! Thank you Zepper2019 and Mike Martin for everything! My pool man was impressed as well, for I showed him the broken piece, and the price I paid for 2 thermistors purchased from Amazon (< $6.00/2). I completed the project within 3 days. Di
My system kicks on and after about 10 seconds the salt level and inspect cell light stays on, the salt level is also reading low. Do you think this would fix that or do I have a bad cell?
Sounds like the same issue I had! You could have the cell tested for free at Leslie's (or whatever local pool place you've got in your area.) If the cell is good I'd go for the repair.
Does it matter was leads go to which side of the solder pads
Does not matter
My power light not coming on would that fix my Problem
Probably not, this issue is for the Salt Cell not turning on or the inspect light staying lit.
Mike Martin It did fix my problem thanks Mike
Don S I'm having the problem of the display screen bing blank. I can hear the power come on to the box it self just not the display screen. Is that the same problem you had? This is my second Hayward control box. Pretty expensive to keep replacing. LOL
GREG WILLIAMS Order a thermostat in on the circuitboard that fix the problem
@@dons453 If my board is totally blank.... and on the back of it it looks like burn marks.... is the SL32 disk thing what i need?
can you crimp connect it to the 2 wire stubs on the board instead of soldering?
I suppose you could try, but this is definitely a solder connection.
Hello Mike. Thanks for this video! What are some of the symptoms that a board with a bad thermistor shows? Mine powers on fine, then when the relay kicks in, the board turns off and back on. A bad current limiter does seem to me like it would cause the board to power cycle, perhaps due to a current overload. The fuse on my board is fine though. Does this sound like a bad thermistor to you? I also thought it could be a bad capacitor, since it may not be holding enough current and then powering off, or a bad relay. Forgot to mention, the board does not power cycle when the salt generator is set to OFF, only if its set to AUTO or SUPER CHLORINATE, and only a few seconds after the relay kicks in. Haven't gone too deep into my component-level troubleshooting, but was hoping you can shed some light on my issue with your past experiences and save me some work. Thank you!
Not sure, this is the lowest cost repair that I know of, who knows you might get lucky.
These thermistor are a common failure point in all of the Goldline/Hayward chlorinators and they fails within several years. It's usually the cause to erratic display behavior, cell cutoff, or lights not functioning correctly. Take a look at the board, MAKE SURE power breaker is off, and look and touch the thermistor. If you see visible cracks or you touch it and it crumbles, it's time to fix it.
@@Zeppelinlv2007 that's how I knew I needed a new one...the thermistor crumbled in my hands.
@@Zeppelinlv2007 my display is not functioning properly glitching and the diagnostic button doesnt work and the lights flicker too
@@Zeppelinlv2007 do u think it might be the transiter? any tests i could do to make sure?
Just completed my repair😀 I ordered a soldering kit and replacement thermistor from Amazon. And I able to replace the part with this video and a few others that I saw. Two year ago it cost me 500 dollars to replace the board via a pool service. My total cost today was twenty dollars Thank you !! P.S I had also just replaced the salt cell at a cost of $375 and the board when bad. Total cost of $395 to be ready for the summer heat🏊🏻🏊🏻🏊🏻🏊🏻.👍👍👍👏👏👏
Awesome, glad I could help.
I have a Thermistor on my Aqua Trol which has split in two. This is all new to me. Where do I order a new Thermistor? Thanks in advance for your help. Marcel
I believe this is the link www.digikey.com/products/en?keywords=SL32%202R025 But I ordered 2 from amazon yesterday for 18 bucks. Most of the cost was shipping to have it here Monday. I hope it works when i put it in Monday , i don't want to buy a new board for it.
I brought my Aqua Trol circuit board to a repair location in St Catharines where the Thermistor was purchased/ installed and it is now working like new for less than $50.00.
I fixed mine ..it was pretty easy once i could get the soldering iron hot enough to melt the solder on the current limiter.
DID IT WORK?
Did you use a solder vacuum when removing the old thermistor?
I used copper wick. I do have a solder vac, but this was too big and too much solder for a vac.
So you are using the SL32 2R025 Thermistor instead of the AS32 2R025? I guess because the leads are flexible and grab the board to make soldering easier?
Chris Roush, yes exactly! The SL32 2R025 has round leads vs. the flat leads of the AS32 2R025. Also the SL provides better performance (at least on paper), not that you will notice in the performance of the chlorine generator... lastly I was able to order 3 of the SLs at a better price from some guy on e-bay with quick shipping. Either one would definitely work.
Cool, that's what I thought. My Hakko made quick work of the job!